I don't think I'll be going that route, as my knuckles are modified in such a way that I do not get the over center type binding at full lock anymore, but that is certainly another good way to get rid of the over centering issue.
As a matter of fact, if you went with the front subframe mod, you might be able to get away with using the stock knuckles, those PBM or Tein tie rod spacers, and get a little more angle out of your stock setup, without going with modified knuckles.
Although, it seems that the subframe mod is actually a bit more involved and the knuckles would be an easier way to do it...
|