Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

*fliprayzin240sx* · 01-23-2009, 11:13 PM

Well as far as back spacings, you guys gotta consider what coilover/suspension you're using. Some bits are thicker diameter wise. I know when I stuffed a set of 17x10 +12 FN01 on my old Kouki, I had to run a 8mm spacers to clear my craptacular MR coilovers. Now on my current S14, I got a set of 17x10 +18 RPF1s and it clears with a 5mm spacer (could have gotten away with 3mm if i had any). This is on an Aragosta Coilover.

Oh yah, GSRacer, howd you pull the rear fenders that much? Did you cut the inner fender to pull the outter than much?

01-23-2009, 11:13 PM	#8
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19)	Well as far as back spacings, you guys gotta consider what coilover/suspension you're using. Some bits are thicker diameter wise. I know when I stuffed a set of 17x10 +12 FN01 on my old Kouki, I had to run a 8mm spacers to clear my craptacular MR coilovers. Now on my current S14, I got a set of 17x10 +18 RPF1s and it clears with a 5mm spacer (could have gotten away with 3mm if i had any). This is on an Aragosta Coilover. Oh yah, GSRacer, howd you pull the rear fenders that much? Did you cut the inner fender to pull the outter than much? __________________ If you think Zilvia has too many assholes... CLICK HERE!!!