Quote:
Originally Posted by mtx450
What about the H4 Hi/Low (Halogen High Beam) Bulb? Does that come with the glare shield as well?
Also, are the ballast's filled with that "resin" stuff to seal it up nice and tight?
|
Hi Sir,
The H4 Hi/Lo comes with a glare shield as well, although it is not as large as the Bi-xenon HIDs, it does help in lowering the glare in the H4 housing and other Bi-xenon headlight housings. It is not removable by twisting though. You must undo 2 clips that are holding the glare shield down. Just straighten them out and the shield should slide right off.
As for the "resin" material, most aftermarket HID kits (unless it is super SUPER cheap) use "resin" to seal and protect their ballasts.
However, we at Xenith Xenons go a step beyond that. We do not simply use any generic resin, we use mastic, which is a type of resin that is derived from the mastic tree (obviously, hehe). Mastic is a bituminous material that is usually prepared as an adhesive or sealant. It has amazing sealant abilities and is amazing with our HID kits.
Our Xenith HIDs are shockproof, waterproof, weatherproof, vibration-proof, etc. In other words, these ballasts are BUILT TO LAST