Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

240on430 · 08-10-2007, 08:06 PM

got a set of gr pros last week...right before i read this post.

i want to return them and order a set of kts coilovers. i dont want to try to break them in and later find out i can't return them anymore.

was anyone able to get rid of the noise?

edited in: I was able to get rid of all noise on the drivers side with the top nut torqued. I flipped the spring and set it at zero pre-load.

I did the same on the right but noise was there, but barely. I check the pre-load and the spring was sagging so, I set it to zero but the noise is louder. Next, I'm going to re-flip the spring(I might have not flipped it) and/or add more pre-load.

08-10-2007, 08:06 PM	#51
240on430 Zilvia Member Join Date: Nov 2006 Location: San Francisco Posts: 230 Trader Rating: (0)	got a set of gr pros last week...right before i read this post. i want to return them and order a set of kts coilovers. i dont want to try to break them in and later find out i can't return them anymore. was anyone able to get rid of the noise? edited in: I was able to get rid of all noise on the drivers side with the top nut torqued. I flipped the spring and set it at zero pre-load. I did the same on the right but noise was there, but barely. I check the pre-load and the spring was sagging so, I set it to zero but the noise is louder. Next, I'm going to re-flip the spring(I might have not flipped it) and/or add more pre-load. Last edited by 240on430; 08-10-2007 at 11:12 PM..