TX DFW: RB26 Head & Block, Single Turbos, Clutch, Etc... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

itsguyguy · 06-12-2012, 04:12 PM

Located in DFW.

Making room in my garage, getting rid of things I won't be using any time soon or anymore.

Paypal or cash preferred.

I'll have some pictures up whenever I have time to take them.

Shipping is optional but will be covered by buyer. If shipping prices are ridiculous, I can chip in.

$OLD
R33 RB26DETT Block/Crank/Girdle
ARP Main Studs
87MM Bore
Decked

$1100 complete or
R33 RB26DETT Head $700 Head is cleared for high lift cams @ 11.3, Resurfaced
HALF WAY PORTED, decided to stick with 260/260 low clearance
Coolant ports in head are CNC machined to remove casting flaws in the coolant ports where they mate to the block.
280/280 GREX Cams $500
TI Ferrea valve springs, retainers and pedestals$600

$1350
PT7175 Journal Bearing Turbo .96AR
T4 Antisurge
Less than 50 miles, practically brand new

$500
PT6765 Journal Bearing Turbo .63/64? AR
T4 Antisurge
(Needs rebuild, shaft play when you pull)

$OLD
Apexi Power FC D Jetro for RB26DETTThe Apexi Power FC D-Jetro runs MAP, not MAF, and comes with everything needed to plug in, including the hand held commander. For the R32-R33 RB26DETT motor.

$900
SSR Type C 5x120
(2)18x9.5 +35 in glossy black
305/35/18 Mickey Thompson Street ET II's with about 60% left
Perfect for your M3, M5, M6 or Chevy!

$900
ACT Street Clutch for RB25/26 + Nismo Flywheel
(less than 1000 miles)

Everything listed is pretty much setup for the 550-700WHP range (16lbs-28lbs), after you get aftermarket pistons/rods/oil pump and N1 water pump with a decent sized turbo.

Pictures of what I have available as of right now, the rest are at the shop.

If you are more than 50 miles away, I wouldn't consider meeting half way to sell anything less than $2000, because it would be a waste of time on both of our ends. Locals are preferred unless you want to ship, just remember Paypal charges 2.9% on top (Thanks Migit240sx, I went by what most people charged me. I forgot that this is Zilvia and the 1.1% makes a big difference) of the pricing after shipping/actual items.

Let's get all this stuff moving! Do what you gotta do to get these parts!

itsguyguy · 06-17-2012, 08:37 PM

Nobody wants good parts for a fraction of the cost?!

Get this stuff moving for more funds towards the four digit S14 build!

BrokenWhite240 · 06-17-2012, 08:55 PM

What's the deal with those s14 door panel with the bride fabric?

garyklovesla · 06-18-2012, 12:40 AM

yooo that ecu do u still have it?

itsguyguy · 06-19-2012, 11:54 AM

Door panels are spares and not for sale.

If you want the ECU, I can swing by the shop and pick it up and get it ready to ship.

The current MAP tune is at 16lbs/8500 for an RB26 with studs, springs, retainers and supporting BPU.

itsguyguy · 06-29-2012, 02:19 AM

The 98 is gone, let's get this stuff gone, too!

itsguyguy · 07-01-2012, 04:10 PM

There has to be somebody out there that wants to build an RB26 up.

240sxConvert · 07-11-2012, 09:04 AM

I can vouch for the seller as I bought the gold s13 you see as his avatar...awesome guy good luck with the sell...

chank11721 · 08-01-2012, 02:43 AM

sell me your door panels....this is chinaman... with love from china <3

dcreech0 · 08-01-2012, 08:16 AM

You firm on the price of block and head? I am looking for a good 26 to start a build on. What all is included?

boniomario · 08-01-2012, 10:19 AM

Quote:

Originally Posted by chank11721

sell me your door panels....this is chinaman... with love from china <3

china man stop cramping up his thread from China

this is Omar from Turkey LOL

s13_rb25 · 08-01-2012, 01:53 PM

Wish you had all 4 of those 5x120 ssr's.

Boost-Fiend · 08-02-2012, 03:41 AM

Would u happen to have rb26 valve covers?

itsguyguy · 08-04-2012, 12:03 AM

Quote:

Originally Posted by 240sxConvert

I can vouch for the seller as I bought the gold s13 you see as his avatar...awesome guy good luck with the sell...

Hey boss, I'm glad that you're putting her to good use and enjoying her.

Last I saw, you swapped the motor and put in cruise control, correct?
Did you ever fix the AC?

elguapo260sx · 09-07-2012, 11:28 PM

who ported the head? micheal j fox?

t's! · 09-26-2012, 10:12 PM

those Willans harnesses for sale? im in N. Dallas

slim_240 · 09-27-2012, 12:26 AM

bump for youuuuu

help this man get over 200mph!!

garyklovesla · 10-05-2012, 10:52 AM

still got ecu?

itsguyguy · 10-05-2012, 08:21 PM

It's still here, sitting in a box at my friend's house.

Two people are asking about it, but doubt anyone will pull the trigger anytime soon.

garyklovesla · 10-05-2012, 08:35 PM

price still same?

itsguyguy · 10-21-2012, 02:25 PM

Price is still the same. Not really in a rush to sell, but if someone wants to save a couple hundred bucks, they can pick mine up.

itsguyguy · 02-28-2013, 09:54 AM

ECU and PT7175 are taken off the list.

To the top.

RB25GUY · 02-28-2013, 02:30 PM

would you sell the gtr stock intake manifold with the itbs if you still have it?

itsguyguy · 03-01-2013, 07:20 PM

I may not have the ITB's, but I have to look.

Sure, you can get the stock intake manifold if you pay for shipping.
Name your price and I'll think about it.

ryandh · 03-02-2013, 11:09 PM

1100 for complete head and block?!?! or am i reading that wrong

itsguyguy · 03-03-2013, 09:13 PM

Ryandh, you read it wrong.

j2fast · 03-05-2013, 12:24 PM

hit me up im still interested in some stuff

itsguyguy · 03-13-2013, 02:44 PM

Hey J2fast, everything is still here until maybe end of summer. If nothing gets pushed out, I'm going to piece everything together for another built RB26 and just throw it in a beater to have fun with on the streets.

itsguyguy · 04-12-2013, 11:40 AM

Updated, bump to the top!

Migit240sx · 04-12-2013, 11:44 AM

Don't know where you're getting that 4%

https://www.paypal.com/webapps/mpp/paypal-fees

06-12-2012, 04:12 PM	#1
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	DFW: RB26 Head & Block, Single Turbos, Clutch, Etc... Located in DFW. Making room in my garage, getting rid of things I won't be using any time soon or anymore. Paypal or cash preferred. I'll have some pictures up whenever I have time to take them. Shipping is optional but will be covered by buyer. If shipping prices are ridiculous, I can chip in. $OLD R33 RB26DETT Block/Crank/Girdle ARP Main Studs 87MM Bore Decked $1100 complete or R33 RB26DETT Head $700 Head is cleared for high lift cams @ 11.3, Resurfaced HALF WAY PORTED, decided to stick with 260/260 low clearance Coolant ports in head are CNC machined to remove casting flaws in the coolant ports where they mate to the block. 280/280 GREX Cams $500 TI Ferrea valve springs, retainers and pedestals$600 $1350 PT7175 Journal Bearing Turbo .96AR T4 Antisurge Less than 50 miles, practically brand new $500 PT6765 Journal Bearing Turbo .63/64? AR T4 Antisurge (Needs rebuild, shaft play when you pull) $OLD Apexi Power FC D Jetro for RB26DETTThe Apexi Power FC D-Jetro runs MAP, not MAF, and comes with everything needed to plug in, including the hand held commander. For the R32-R33 RB26DETT motor. $900 SSR Type C 5x120 (2)18x9.5 +35 in glossy black 305/35/18 Mickey Thompson Street ET II's with about 60% left Perfect for your M3, M5, M6 or Chevy! $900 ACT Street Clutch for RB25/26 + Nismo Flywheel (less than 1000 miles) Everything listed is pretty much setup for the 550-700WHP range (16lbs-28lbs), after you get aftermarket pistons/rods/oil pump and N1 water pump with a decent sized turbo. Pictures of what I have available as of right now, the rest are at the shop. If you are more than 50 miles away, I wouldn't consider meeting half way to sell anything less than $2000, because it would be a waste of time on both of our ends. Locals are preferred unless you want to ship, just remember Paypal charges 2.9% on top (Thanks Migit240sx, I went by what most people charged me. I forgot that this is Zilvia and the 1.1% makes a big difference) of the pricing after shipping/actual items. Let's get all this stuff moving! Do what you gotta do to get these parts! Last edited by itsguyguy; 05-30-2013 at 06:12 PM..

06-17-2012, 08:55 PM	#3
BrokenWhite240 Zilvia Junkie Join Date: Nov 2007 Location: Cherry Hill, NJ Age: 28 Posts: 529 Trader Rating: (14) Feedback Score: 14 reviews	What's the deal with those s14 door panel with the bride fabric? __________________ Team Prettyboys

09-27-2012, 12:26 AM	#17
slim_240 Zilvia Member Join Date: Jun 2009 Location: dallas, tx Posts: 246 Trader Rating: (3) Feedback Score: 3 reviews	bump for youuuuu help this man get over 200mph!! __________________

03-02-2013, 11:09 PM	#25
ryandh Zilvia Junkie Join Date: Nov 2011 Location: So cal Posts: 386 Trader Rating: (4) Feedback Score: 4 reviews	1100 for complete head and block?!?! or am i reading that wrong __________________

03-05-2013, 12:24 PM	#27
j2fast Join Date: Mar 2012 Location: dallas texas Age: 28 Posts: 23 Trader Rating: (1) Feedback Score: 1 reviews	hit me up im still interested in some stuff __________________ www.j2fastmotorsports.com

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

06-17-2012, 08:37 PM	#2
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	Nobody wants good parts for a fraction of the cost?! Get this stuff moving for more funds towards the four digit S14 build!

06-18-2012, 12:40 AM	#4
garyklovesla Join Date: Oct 2010 Location: cali Age: 24 Posts: 24 Trader Rating: (1) Feedback Score: 1 reviews	yooo that ecu do u still have it?

06-19-2012, 11:54 AM	#5
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	Door panels are spares and not for sale. If you want the ECU, I can swing by the shop and pick it up and get it ready to ship. The current MAP tune is at 16lbs/8500 for an RB26 with studs, springs, retainers and supporting BPU.

06-29-2012, 02:19 AM	#6
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	The 98 is gone, let's get this stuff gone, too!

07-01-2012, 04:10 PM	#7
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	There has to be somebody out there that wants to build an RB26 up.

07-11-2012, 09:04 AM	#8
240sxConvert Join Date: Aug 2006 Location: Liberal, KS Age: 24 Posts: 44 Trader Rating: (2) Feedback Score: 2 reviews	I can vouch for the seller as I bought the gold s13 you see as his avatar...awesome guy good luck with the sell...

08-01-2012, 02:43 AM	#9
chank11721 Join Date: Oct 2011 Location: dallas Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	sell me your door panels....this is chinaman... with love from china <3

08-01-2012, 08:16 AM	#10
dcreech0 Leaky Injector Join Date: Oct 2011 Location: Kentucky Posts: 59 Trader Rating: (0) Feedback Score: 0 reviews	You firm on the price of block and head? I am looking for a good 26 to start a build on. What all is included?

08-01-2012, 01:53 PM	#12
s13_rb25 Zilvia Addict Join Date: Jun 2010 Location: Orlando, FL Age: 20 Posts: 674 Trader Rating: (7) Feedback Score: 7 reviews	Wish you had all 4 of those 5x120 ssr's.

08-02-2012, 03:41 AM	#13
Boost-Fiend Zilvia Junkie Join Date: Feb 2007 Location: las vegas Age: 26 Posts: 396 Trader Rating: (0) Feedback Score: 0 reviews	Would u happen to have rb26 valve covers?

09-07-2012, 11:28 PM	#15
elguapo260sx Leaky Injector Join Date: Jul 2010 Location: Louisville, Ky Age: 31 Posts: 75 Trader Rating: (6) Feedback Score: 6 reviews	who ported the head? micheal j fox?

09-26-2012, 10:12 PM	#16
t's! Join Date: Dec 2011 Location: dallas Age: 31 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	those Willans harnesses for sale? im in N. Dallas

10-05-2012, 10:52 AM	#18
garyklovesla Join Date: Oct 2010 Location: cali Age: 24 Posts: 24 Trader Rating: (1) Feedback Score: 1 reviews	still got ecu?

10-05-2012, 08:21 PM	#19
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	It's still here, sitting in a box at my friend's house. Two people are asking about it, but doubt anyone will pull the trigger anytime soon.

10-05-2012, 08:35 PM	#20
garyklovesla Join Date: Oct 2010 Location: cali Age: 24 Posts: 24 Trader Rating: (1) Feedback Score: 1 reviews	price still same?

10-21-2012, 02:25 PM	#21
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	Price is still the same. Not really in a rush to sell, but if someone wants to save a couple hundred bucks, they can pick mine up.

02-28-2013, 09:54 AM	#22
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	ECU and PT7175 are taken off the list. To the top.

02-28-2013, 02:30 PM	#23
RB25GUY Leaky Injector Join Date: Feb 2013 Location: NY Age: 24 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	would you sell the gtr stock intake manifold with the itbs if you still have it?

03-01-2013, 07:20 PM	#24
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	I may not have the ITB's, but I have to look. Sure, you can get the stock intake manifold if you pay for shipping. Name your price and I'll think about it.

03-03-2013, 09:13 PM	#26
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	Ryandh, you read it wrong.

03-13-2013, 02:44 PM	#28
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	Hey J2fast, everything is still here until maybe end of summer. If nothing gets pushed out, I'm going to piece everything together for another built RB26 and just throw it in a beater to have fun with on the streets.

04-12-2013, 11:40 AM	#29
itsguyguy Zilvia Junkie Join Date: May 2009 Location: Dallas Age: 26 Posts: 374 Trader Rating: (4) Feedback Score: 4 reviews	Updated, bump to the top!

04-12-2013, 11:44 AM	#30
Migit240sx Zilvia Member Join Date: Oct 2011 Location: Los Angeles Posts: 299 Trader Rating: (11) Feedback Score: 11 reviews	Don't know where you're getting that 4% https://www.paypal.com/webapps/mpp/paypal-fees

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode