Cypher02xd

I've come to the difficult decision to part out my coupe. I was getting it ready for paint and while it was over at a buddies someone backed into the car with a box truck. I don't have the heart or energy to pick up a shell to swap everything over or feel like getting it fixed and it never being the same so I'm parting it. I AM IN THE PROCESS OF PULLING PARTS, as such I may not have pictures for all items but I am working on it! Onto the parts:

Ka-t turbo setup: Borg Warner s360 turbocharger (BNIB), boost logics turbo manifold, recirculated downpipe and PTE 39mm wastegate with 10.5psi springs installed right now. $1100





Crower Camshafts with JWT adjustable cam gears, will come in orginal box with cam card $350:






Tapped DOHC oil pan $80



Sohc MAF, new when I put it on 2 years ago: $50 shipped

3x s13 DOHC mafs: $25 shipped each

Sohc timing chain kit $60 shipped


KA header, is for a s14 but I used it on my s13 because I wanted a flex section: $50



ISIS Dual N'1 exhaust $200 (Will have pics off car soon)


Spearco Intercooler setup: If I remember correctly from my research with spearco the intercooler core itself is rated to ~650hp. $300 with piping and t-bolt clamps. have misc couplers for it




ISIS KA radiator with aluminum shroud and dual electric fans, the shroud has been painted with bedliner then with a high temp flat black. Will throw in my Nismo thermostat as well if anyone wants it with these: $225


J30 Rear Differential, I don't have the rear cover. I sand blasted the diff and painted it blue to match my Megan Control arms: $100


COMPLETE 5 lug swap setup with z32 wheels and j30 front brakes. This includes: s14 front spindles with FLCAs and new ball joints cleaned and painted in black, agency power adapters to use s13 bolts, rear s14 hubs, front j30 rotors and dual piston calipers with pads freshly rebuilt, s14 rear rotors and s13 rear calipers if needed AND z32 wheels to go with them. Almost forgot the Ichiba 15mm spacers and extended studs on the front spindles. $700



COMPLETE 5 speed swap parts: clutch pedal with new clutch master cylinder, agency power clutch line, new slave cylinder, 5 speed brake pedal, s14 transmission that's been cleaned and painted with NO grinds, Isis short throw shifter, s13 5 speed driveshaft, ACT 6 puck xtreme clutch with <1000 miles on it, 5 speed transmission mount and I'll throw in my condensed lower engine harness for use with it. $700



Megan Racing Street Coilovers. No leaking coilovers. Good Budget coils. Had them on my hatch then my coupe. Need to get them all off the car for pics. $400


Megan Racing Tension Rods. $80


Megan Racing Traction Rods: $50

Megan Racing RUCA: $80

ISIS Subframe bushings BNIB: $80


S14 seats. $100


ChaseBays Brake kit for z32 master cylinder. Deletes all the factory hardlines in the engine bay: $150



Local pick-up will be perferred over shipping. I will not ship the larger items but am willing to meet others for gas money/tolls if applicable. If you don't like the price and think I am being un-fair then pm me. I know I'm not getting back what I put into this car but I need to move these parts. Thanks everybody.

D.Pomps

still have the subframe spacers? txt 4253289115

702s13

How much for the coils shipped to 89052? any leaks? Or blown

__________________
extrabolts are just weight reduction

Fonix36

willing to part with fans and shroud

__________________

DRiFT 4 A Cure!

nismo91blk240sx

Pm'd about the ems

bussitcustoms

Good prices

Cypher02xd

Yes I still have them.

I have someone local interested in them. If that falls through I will let you know. As long as you are willing to pay what it costs me to ship them I'll ship.

I would perfer to try and keep the radiator/fans/shroud together. It's a great combination when it comes to cooling down the engine bay. I only ever needed one fan with the shroud to keep temps under control even in 110* days.

gostrider

damn only if you were closer I would pick up the entire turbo setup.

TollieLifted

you have a pm sir

death

Pm me if that driveshaft is ABS. the s13 one.

702s13

Ok thanks!

__________________
extrabolts are just weight reduction

drftx

Willing to sell the trunk latch key cylinder and key?

__________________
http://wtfitzac.blogspot.com/

Cypher02xd

sure. make me an offer.

drftx

pmed you man

__________________
http://wtfitzac.blogspot.com/

Cypher02xd

I'll ship it if you're willing to pay for it. I don't have a problem doing that.

Fonix36

Trade for some duel altemas ill cover shipping

__________________

DRiFT 4 A Cure!

foxrydr13

also curious if the driveshaft is abs or not.

Cypher02xd

I have no need for them. I'm getting away from 240s for awhile. I have a local who wants the whole cooling setup. I'm giving perference to them so I don't have to deal with shipping

It's non abs. Sorry that I didn't answer this sooner.

So far what sold is: Intake manifold, AEM EMS, Aem Uego, full fuel setup, and jwt cam gears.

I have locals interested in the: S14 seats, radiator/fan/shroud combo, Cams, coilovers and exhaust.

Thanks for all the interest so far guys.

tuktuk23

willing to part with the downpipe? Pm'ed you

and tapped oil pan?

TollieLifted

Interested in the ruca. pm'd you

bullfrogg0

willing to ship exhaust? pm me if so

Cypher02xd

I don't know where I could find a box big enough to ship the exhaust. I have someone local whos expressed interested I'll give him first shot because I really don't want to ship it.

Camshafts are also sold. Thanks everyone!

D.Pomps

contact me if you want the bushings sold

e5s4y

did you have some kind of electric fan controller or what?

__________________
BustedS13: anything you can hide on your person is free. junkyard law.

elise

trade traction rod and ruca for my bride seat?
Wtt BRIDE SEAT AND RAIL

BxLumpy

let me know if you sell those coilover i need them shipped to 98229 and i dont mind paying for shipping just let me know

Fonix36

so how much for the fans and shroud shipped to 90041

__________________

DRiFT 4 A Cure!

Cypher02xd

Not interested in trades. Trying to get money together so I can get into another car.

Cool I will let you know. I am trying to avoid shipping them and want to give locals first shot at them.

If I can find a box to ship them in I will. Hopefully I'll get a radiator job at work so I can use that box to ship it in. If I can get one how about for an extra $25? I'm sure it'll cost more because of the size but I'll deal with it.

Cypher02xd

PS.

I talked to the insurance company today and the car is indeed considered a loss and totalled. I'll be getting the salvage certificate so I can continue to part out the car for members for about a month before I get it dragged away. Thanks to everyone for the interest. Please be paitent if I don't get back to you right away. I work full time and have a girlfriend and two kids that demand attention plus time for myself, allbeit rare, and I'm doing my best to keep up with all the pm's and posts I'm getting.

nujabe

Will you part the rear rotors ?