|06-22-2011, 05:24 PM||#1|
****summer garage clean out sale****
Just trying to get rid of some of the stuff I no longer need. So here it is boys and girls.
Dmax S13 coupe roof spoiler (authentic not no knock off here) $230 local pick up also I have the 180sx roof wing as well for the same price. PM for shipping price
Dmax crytal clear 180sx fender markers $45 shipped
s13 chuki front bumper clear lights $65 shipped
Samco and Blitz SR radiator setup. The Blitz hose has the water temp sensor inlet built in SOLD
Cusco Oil catch can SOLD
Greddy Radiator Breather tank $130 shipped BNIB, but just forgot to take pic of.
HKS turbo timer good working condition comes with harness $50 shipped
HKS intake filter small version for s13 SR maf SOLD
HKS intake system used but great condition. I have all the extra little brackets and stuff, but no clamps. (hit up any hardwarestore and problem solved will be included $80 shipped.
JDM Option DVDs viewed of course and nothing wrong with them $180 shipped for all of them.
Tanabe front and rear sway bars $240 local pick up only
Greddy SMI gauges Brand new never used ever. White face 60mm. Oh MSRP on these all together is like $1400. $999 shipped
Includes boost, oil pressure, oil temp, egt, water temp, fuel pressure, and controller. These are not regular Greddy gauges, you need the controller to make it work.
BNIB Nissan OEM 180sx front bumper lights $85 shipped
Authentic G-Corp wing (only one of two in the states as far as I know) $700 local pick up
S13 exhaust for SR. Greddy down pipe, no brand straight pipe, custom piping, and Aspec burnt tip muffler. $250obo local pick up only. Has scratches on the bottom of downpipe and a dent on the muffler. But works fine and no leaks.
Turbo set up comes with S15 Spec R turbo w/less than 100 track only miles, Tomei Manifold (legit one, the tag fell off is all, no leaks), Baker's Precision turbo lines, S14 SR water neck (used with one of the water lines so you can cap off the one that runs to the back of the block), Phase2 Motor oil return tube, Greddy Turbo Elbow, and in/out turbo outlets (missing bolts for the turbo inlet and one bolt for the turbo outlet pipe), and HKS actuator. Everything was bought new and in working condition when pulled off of vehicle. Asking $1200 picked up or $1300 shipped. This set up is good for 300 hp and comes with everything you basically need for it. Will not part out at this time. (Does not come with O2 sensor)
Good condition Battle Version S13 RUCA $200 shipped
I also have a knock off Bride Brix II passenger side with real bride seat rails for $220 local pick up. That's basically getting a free seat with a purchase of a bride seat rail. I don't have a picture of it, but in good and clean condition.
Griffin S13 SR radiator (the best radiator I have used, blows Koyo and Mishit out of the water) $300 local pick up
Nissan OEM Z32 fuel filter $16 shipped
S13 side mirrors bnib SOLD
S13 SR20Det BNIB Tomei Poncam 256 in/out SOLD
ORC Ogura Racing Clutch Flag $60obo shipped
Super Autobacs Flag (kinda rare now) $80 shipped
Works Bell sticker $10 shipped
Fatlace little stickers SOLD
350z OS Giken Super Single Clutch Sprung used for only 2000 miles asking for $1200 obo, brand new this is $1600+ ( comes with the TOB)
350z OS Giken 1.5 way Diff used for 4,000 miles $1200obo shipped, brand new this unit is $1800+
I have have a brand new Rotora BBK for 86-92' Mazda RX-7 FC front. These are brand new 4 piston red calipers and comes with 330x30mm rotors. The only thing missing from this is the stainlesss steel brakelines, but that's super easy to make yourself. Most places sell between $2k, but I'm letting it go for $1400obo shipped. Even though it is for an FC you can make adapter plates custom to your vehicle and have a BBK for the front for really cheap price.
Buyer pays Paypal fee if using paypal.
Last edited by azndoc; 07-08-2011 at 05:20 PM..
|06-23-2011, 07:41 PM||#4|
Those gauges are still around?! I've never seen anyone else with a full set of Greddy SM Evo's! Every one you could possibly need too... damn...
This guy is super legit.
That's not a bad deal for the S15 Spec R turbo/legit mani/elbow and HKS actuator either...
|06-24-2011, 12:25 PM||#9|
The list has been updated.
|07-05-2011, 11:46 AM||#13|
SR swap is spoken for, but everything else is still available.
Someone buy the turbo set up, 300 hp blam at your disposal.
Tuesday morning bump after the holidays. Hope everyone had a safe and nice 4th of July.
|07-11-2011, 10:59 AM||#14|
Monday morning bump. Still need to get rid of a bunch of stuff.
HIT ME UP WITH SOME OBO prices people for the items.
|07-20-2011, 11:04 AM||#19|
still have these stuff and so last bump before I have to start a new thread.
|07-20-2011, 12:57 PM||#21|
First result: Tanabe Sustec Sway Bars (Drift Spec) S13/S14
Front is 30.4mm hollow, rear is 22mm solid. If you're running proper spring rates (not some 12k nonsense) these are fantastic sways.
|07-21-2011, 09:38 AM||#23|
JJ for Guv'nor
Join Date: Nov 2009
Location: Whittier (562)
Trader Rating: (33)
Feedback Score: 33 reviews
Are the Dmax side markers still avaliable?
In need of the following items:
1x Heater hose kit for Sr20
1x S13 ABS Driveshaft
1x Dome light cover for hatchback with sunroof.
|07-22-2011, 11:44 PM||#24|
I can't believe no one's hopped on that Rotora BBK! The rotors will fit on a S-chassis, all you'd have to do is mod the brackets or make new ones (or, pay someone a little to do it).
Seeing as how calipers like that are almost a grand and good two-piece rotors are about the same, it's a steal!
|07-23-2011, 01:09 AM||#26|
the MaD armenian
I think in that situation Mr. Azndoc will have to chime in.
lots of awesome parts man. +1
|07-23-2011, 11:52 AM||#28|
Its the 28mm one, blam chimed in.
|07-23-2011, 06:46 PM||#29|
Join Date: Apr 2006
Trader Rating: (7)
Feedback Score: 7 reviews
Hey would you be willing to sell just the brackets from the brake kit.
If you dont mind whats the ceter to center spacing on the caliper mounting holes. Reason being is I have some bad ass alcon caliopers & i wonder if the mount spacing is the same.
|07-23-2011, 07:35 PM||#30|
No sorry will not separate the bracket from the calipers.