Rittmeister

Need to start moving some of these things out of here. Prices are OBO (a little) and DO NOT include shipping. This is NOT a part-out - if it's not listed here I don't have it. These are spares I've accumulated over the last 5 years or so, and since the car will hopefully sell soon I'm selling these off as well.

S13 chassis/interior etc:

Stock springs – make offer
Stock tension rods (shot bushings, good for urethane replacements) - $20
Stock front lower arms (good for pressing in S14 balljoints for 5-lug) - $40
Stock sway bars - make offer
Front suspension upper assemblies with near-new OEM strut mounts from PDM - $60
Rear upper assemblies - $40
S13 non-ABS front brake calipers/brackets/lines - $65 for everything, no pads
Aftermarket aluminum skid plate (protects oil pan) - $40

Open diff/outputs (good for welding): $75

Shifter surround (plain black): $25
Steering column cover (top and bottom) - $25
Air vents - $20 for all
Wiper motor - $20
Sun visors NOT rain visors (gray coupe)- $20 for both
Dome light (gray coupe) - $10
Power steering high-pressure line (aftermarket from Autozone, fits KA-DE or SR) - $35


RWD SR20DET parts:

4 Coilpacks + harness: $110
Ignitor chip: $75
Starter (worked fine): $125
AC compressor- $50
Water Pump (near new) - $50
CAS Cover (looks new) - $15


Stock T25 with oil and water lines, worked great but might need a rebuild, I don't know enough about it. Didn't burn oil or smoke AT ALL: $100
370cc injectors in S13 stock fuel rail: $120
SOHC Maf/filter adapter/wiring pigtail/3”silicone adapter (works with redtop SR): $60
SR stock intake tube (MAF to compressor inlet): $30
62 ECU: $125
Stock 02 housing - $20
Fat 02 sensor (blacktop) - $20
Stock oil pan with two custom hi-temp silicone gaskets - $40
Spark plugs – 2 sets $20/set Bkr6e
Transmission crossmember - $40

Greddy hotpipe for BOV (this is an 8-inch piece of cast aluminum pipe with a Greddy Type-S or -RS flange cast into it, fits into the stock Redtop hotpipe) includes gasket and bolts - $50
Attain shifter (stock throw but solid metal, no smooshy rubber) - $60

Valve cover w/gasket - painted very pale gold color $40
Coil cover - professionally painted Subaru Rally Blue with black letters and clearcoat - $35
Coil cover 2 - (stock) $20

Please PM with questions/offers. I can provide pics of a lot of this stuff if needed.

__________________
E36 M3 - new project
1990 240SR - screamed down the road

Rittmeister

Bump it up. All prices are OBO.

__________________
E36 M3 - new project
1990 240SR - screamed down the road

dat411kid

I need the Valvecover "T" fitting from the sr20det cover....

pm me...

__________________
http://www.leg1t.com

Rittmeister

You already PM'd me. I PM'd you back two days ago. I am still not pulling the T off the valve cover. If you'd like to buy the complete valve cover, it's for sale and you can check your PM for details.

__________________
E36 M3 - new project
1990 240SR - screamed down the road

Rittmeister

Someone has to need some of these things.

Now accepting near-lowballs. Need to get this stuff out of here.

__________________
E36 M3 - new project
1990 240SR - screamed down the road

Rittmeister

Skid plate and sway bars gone. All other items available.

__________________
E36 M3 - new project
1990 240SR - screamed down the road

Propaganda

I'm interested in the T25. If you don't know much about the T25, how do you know it doesn't smoke? Picks?

Rittmeister

T25 is actually already sold. Sorry.

__________________
E36 M3 - new project
1990 240SR - screamed down the road

midnightouge

How much for the oil pan shipped to 94565?

__________________