GA RB20DET Modded, 300-400 hp, Nice, clean! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

minuszero_315 · 02-21-2009, 11:56 PM

Hello I have a rb20det and transmission out of a 92 gtst, it is a low milage motor/trans set I bought from jhot imports apx a year ago. Motor had 128000km on it (79000 miles). I finished it apx last july-august, got it since tuned since changed the injectors, but only tuned at 7 psi.

The reason i am selling it: I drove it 473 miles getting it broke in and making sure everything was good, bought a ebc and was having it put in at a shop, and on november 24 some one stold every thing (gauges, turbo timer, safc, ebc, maf, and bov) yeah thats right the sorry bastards poped my hood and took there time. Anyways the shop owner said he had my back, "you know i will get/buy it all back... buddy"....I believed him so to make a long story short, well nothing, and I am not buying it all again plus I cant afford it. Yall know how it is.

Engine Specs:
-Everything (except motor) has less than 500 miles on it and was bought Brand New!
-Rb20det motor and tranny
-Replaced timing belt, waterpump
-Garrett t3/t04e turbo (60 trim)
-XSPower top mount exhaust manifold
-TopHat Performance Motor and Tranny mounts
-DeatschWerks 440s top feed injectors
-Tial 38mm wastegate (7lb spring) (has both plugs on if so you can hook up a boost controller just run a vac hose
-Harness work was done by WiringSpectialies (wired car was a dohc)
-Stainless steel braided high temp oil feed line, and slave cylinder line connector
-Clutchmaster Stage 2 Clutch and pressure plate (resurfaced flywheel)
-Tophat performance top half intake manifold
(Polished aluminum :naughty )
-Polished aluminum valve covers
-GM conversion ign coil packs (easier to work on, more spark, and cheaper!)
-Powersteering pump converted and works with
-Shifter was shortened by 2''
-Custom Down Pipe 2 1/2" to 3"(test pipe) done by tophat performance also

This set is ready to drop in and go, every thing is there except a maf and that is what got stolen. They unpluged everything they did not just cut it all. Oh yeah the harness had a safc installed so that is considered cut but as far as I could see they unpluged every thing and just took what they needed unstead of just ripping and yanking everything out, lol.

I am asking $3500 and will considering shipping it if you pay shipping costs but would perfer pick up. I know if live in cali, you wont pick up tho lol

Sure I forgot something but that pretty much sums it up if you have any questions just email or call
770-633-8388 Michael

Also a link of it on the dyno just at 7psi (sorry bough music if you dont like, thats what makes blood pump through my veins, lol jk)

Video:
http://www.youtube.com/watch?v=r8QhCfnMpkc

Pictures:
[IMG]http://i43.tinypic.com/2my3qe9.jpg[/IMG]
[IMG]http://i39.tinypic.com/oiam4j.jpg[/IMG]
[IMG]http://i39.tinypic.com/5a0276.jpg[/IMG]
[IMG]http://i44.tinypic.com/35it82u.jpg[/IMG]
[IMG]http://i40.tinypic.com/zl3c4m.jpg[/IMG]
[IMG]http://i41.tinypic.com/flvpyd.jpg[/IMG]
[IMG]http://i44.tinypic.com/33kwuao.jpg[/IMG]
[IMG]http://i40.tinypic.com/2l0u51.jpg[/IMG]

wickedjester · 02-22-2009, 11:10 AM

that sucks really bad u get a free bump from me

l2u4k0assx · 02-22-2009, 11:32 AM

hey would u be willing to sell the motor/tranny mounts?

minuszero_315 · 02-22-2009, 11:53 AM

Quote:

Originally Posted by l2u4k0assx

hey would u be willing to sell the motor/tranny mounts?

not as of right now i want to sell all of it as a whole package deal, but i may consider parting out later, thanks

*allntrlundrgrnd* · 02-22-2009, 12:56 PM

really cant figure that out?

glws

rbpwrdsil40 · 02-22-2009, 03:05 PM

hey man what kinda of hose did u use for your oil return???

minuszero_315 · 02-22-2009, 06:24 PM

Quote:

Originally Posted by rbpwrdsil40

hey man what kinda of hose did u use for your oil return???

just regular pressure oil line hose

Cant figure out what?....

minuszero_315 · 02-22-2009, 06:29 PM

free shipping up to 300 bucks

*jeb* · 02-22-2009, 08:39 PM

just buy this motor john so when you blow your rb up you'll have a back up

Ktown_drifter · 02-22-2009, 08:42 PM

if you do deicide to part be interested in the Plenum.. what site did you pick that up off?

rbpwrdsil40 · 02-22-2009, 10:41 PM

Quote:

Originally Posted by minuszero_315

just regular pressure oil line hose

Cant figure out what?....

where did u get it at ive been al over town what size is it, thanks alot

rbpwrdsil40 · 02-22-2009, 10:43 PM

Quote:

Originally Posted by jeb

just buy this motor john so when you blow your rb up you'll have a back up

ha you should buy it so you can keep up with me haha

minuszero_315 · 02-22-2009, 11:04 PM

I think I just got it at O'reilys?...i think its 5/8 but dont quote me.

That Intake plem. I got from TopHat performance, I am pretty good friends with the owner (former owner he shut his business down) Him and mckinneys make those infamous mounts, but his are better....anyways he is closed though. I will let you know if i want to part. Hell of a lot better than factory, specially for a fmic.

I have a couple ppl interested in the turbo set up with injectors, if i sell that and put the factory manifold, turbo, injectors, and down pipe I would take $2300. You still get everything ready to drop in plus that intake manifold... Let me know what every one thinks. Like i said i need some money and dont care how! lol thanks

rbpwrdsil40 · 02-22-2009, 11:07 PM

hmm. thanks is there a part number on there man , this would help me so much thanks

minuszero_315 · 02-22-2009, 11:21 PM

i will look tommorow, its at my dads house and let you know.

Quote:

Originally Posted by rbpwrdsil40

hmm. thanks is there a part number on there man , this would help me so much thanks

minuszero_315 · 03-02-2009, 02:11 AM

bump...come on people i need it gone, make offers, thanks

*90hatchie* · 03-02-2009, 02:19 AM

if u decide to part out im interested in harness and mounts

Neejay · 03-02-2009, 07:17 AM

Quote:

Originally Posted by 90hatchie

if u decide to part out im interested in harness and mounts

unfortunately, mounts are already possibly spoken for locally.

minuszero_315 · 03-04-2009, 03:32 PM

Quote:

Originally Posted by Neejay

unfortunately, mounts are already possibly spoken for locally.

hey neejay, i havent forgot about you...lol i will still let you know if i want to let them go

chadca18s13 · 03-04-2009, 03:51 PM

if you decide to part out, im interested in the injectors

minuszero_315 · 03-04-2009, 04:09 PM

is anyone interested in the turbo set up with injectors?....pm me

minuszero_315 · 03-05-2009, 09:16 PM

thank you for unlocking, anyways new price.
Price is $3000 i really need this gone folks i am unemployed (not trying to be all sobby and sh*t but this was what I was planning on getting me by for the time being)

djstatistics · 09-13-2009, 08:20 PM

Will you be will to sell the tranny itself?

*Zacho* · 09-13-2009, 08:26 PM

I could be interested in turbo/mani/dp/lines. Send me a PM with what your looking for if your willing to part it.

DrftKingIII · 09-13-2009, 09:35 PM

Look at the OP date.

***racerx2k1*** · 09-13-2009, 11:06 PM

Last Activity: 04-04-2009 12:55 AM

02-21-2009, 11:56 PM	#1
minuszero_315 Join Date: Feb 2009 Location: atlanta Age: 22 Posts: 20 Trader Rating: (0)	RB20DET Modded, 300-400 hp, Nice, clean! Hello I have a rb20det and transmission out of a 92 gtst, it is a low milage motor/trans set I bought from jhot imports apx a year ago. Motor had 128000km on it (79000 miles). I finished it apx last july-august, got it since tuned since changed the injectors, but only tuned at 7 psi. The reason i am selling it: I drove it 473 miles getting it broke in and making sure everything was good, bought a ebc and was having it put in at a shop, and on november 24 some one stold every thing (gauges, turbo timer, safc, ebc, maf, and bov) yeah thats right the sorry bastards poped my hood and took there time. Anyways the shop owner said he had my back, "you know i will get/buy it all back... buddy"....I believed him so to make a long story short, well nothing, and I am not buying it all again plus I cant afford it. Yall know how it is. Engine Specs: -Everything (except motor) has less than 500 miles on it and was bought Brand New! -Rb20det motor and tranny -Replaced timing belt, waterpump -Garrett t3/t04e turbo (60 trim) -XSPower top mount exhaust manifold -TopHat Performance Motor and Tranny mounts -DeatschWerks 440s top feed injectors -Tial 38mm wastegate (7lb spring) (has both plugs on if so you can hook up a boost controller just run a vac hose -Harness work was done by WiringSpectialies (wired car was a dohc) -Stainless steel braided high temp oil feed line, and slave cylinder line connector -Clutchmaster Stage 2 Clutch and pressure plate (resurfaced flywheel) -Tophat performance top half intake manifold (Polished aluminum :naughty ) -Polished aluminum valve covers -GM conversion ign coil packs (easier to work on, more spark, and cheaper!) -Powersteering pump converted and works with -Shifter was shortened by 2'' -Custom Down Pipe 2 1/2" to 3"(test pipe) done by tophat performance also This set is ready to drop in and go, every thing is there except a maf and that is what got stolen. They unpluged everything they did not just cut it all. Oh yeah the harness had a safc installed so that is considered cut but as far as I could see they unpluged every thing and just took what they needed unstead of just ripping and yanking everything out, lol. I am asking $3500 and will considering shipping it if you pay shipping costs but would perfer pick up. I know if live in cali, you wont pick up tho lol Sure I forgot something but that pretty much sums it up if you have any questions just email or call 770-633-8388 Michael Also a link of it on the dyno just at 7psi (sorry bough music if you dont like, thats what makes blood pump through my veins, lol jk) Video: http://www.youtube.com/watch?v=r8QhCfnMpkc Pictures: [IMG]http://i43.tinypic.com/2my3qe9.jpg[/IMG] [IMG]http://i39.tinypic.com/oiam4j.jpg[/IMG] [IMG]http://i39.tinypic.com/5a0276.jpg[/IMG] [IMG]http://i44.tinypic.com/35it82u.jpg[/IMG] [IMG]http://i40.tinypic.com/zl3c4m.jpg[/IMG] [IMG]http://i41.tinypic.com/flvpyd.jpg[/IMG] [IMG]http://i44.tinypic.com/33kwuao.jpg[/IMG] [IMG]http://i40.tinypic.com/2l0u51.jpg[/IMG]

02-22-2009, 11:10 AM	#2
wickedjester Zilvia Junkie Join Date: Jan 2008 Location: escondido Age: 21 Posts: 500 Trader Rating: (4)	that sucks really bad u get a free bump from me __________________ ur car door says protect and serve but on the street its harass and disturb

02-22-2009, 12:56 PM	#5
allntrlundrgrnd Premium Member Join Date: Jul 2007 Location: murdaland Posts: 1,814 Trader Rating: (7) Rides Gallery: allntrlundrgrnd	really cant figure that out? glws __________________ review thread Buy my turbo Coupe

03-02-2009, 02:19 AM	#17
90hatchie WAFFLEZZZZ Join Date: Dec 2006 Location: yorktown hts ny Age: 21 Posts: 1,254 Trader Rating: (1)	if u decide to part out im interested in harness and mounts __________________ buy my stuff!

09-13-2009, 09:35 PM	#25
DrftKingIII Zilvia Addict Join Date: Nov 2007 Location: St Louis MO Posts: 689 Trader Rating: (1)	Look at the OP date. __________________ 97 240sx with RB/6 Pt cage/Version Select/More FS! Check my thread!

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

02-22-2009, 11:32 AM	#3
l2u4k0assx Join Date: Jul 2008 Location: Lampasas Age: 19 Posts: 7 Trader Rating: (0)	hey would u be willing to sell the motor/tranny mounts?

02-22-2009, 03:05 PM	#6
rbpwrdsil40 Zilvia Member Join Date: Dec 2008 Location: IL Age: 20 Posts: 196 Trader Rating: (4)	hey man what kinda of hose did u use for your oil return???

02-22-2009, 06:29 PM	#8
minuszero_315 Join Date: Feb 2009 Location: atlanta Age: 22 Posts: 20 Trader Rating: (0)	free shipping up to 300 bucks

02-22-2009, 08:39 PM	#9
jeb GOT DEER POWER? Join Date: Sep 2008 Location: here Posts: 193 Trader Rating: (4)	just buy this motor john so when you blow your rb up you'll have a back up

02-22-2009, 08:42 PM	#10
Ktown_drifter Leaky Injector Join Date: Jan 2009 Location: Napanee Ontario Canada Age: 25 Posts: 93 Trader Rating: (0)	if you do deicide to part be interested in the Plenum.. what site did you pick that up off?

02-22-2009, 11:04 PM	#13
minuszero_315 Join Date: Feb 2009 Location: atlanta Age: 22 Posts: 20 Trader Rating: (0)	I think I just got it at O'reilys?...i think its 5/8 but dont quote me. That Intake plem. I got from TopHat performance, I am pretty good friends with the owner (former owner he shut his business down) Him and mckinneys make those infamous mounts, but his are better....anyways he is closed though. I will let you know if i want to part. Hell of a lot better than factory, specially for a fmic. I have a couple ppl interested in the turbo set up with injectors, if i sell that and put the factory manifold, turbo, injectors, and down pipe I would take $2300. You still get everything ready to drop in plus that intake manifold... Let me know what every one thinks. Like i said i need some money and dont care how! lol thanks

02-22-2009, 11:07 PM	#14
rbpwrdsil40 Zilvia Member Join Date: Dec 2008 Location: IL Age: 20 Posts: 196 Trader Rating: (4)	hmm. thanks is there a part number on there man , this would help me so much thanks

03-02-2009, 02:11 AM	#16
minuszero_315 Join Date: Feb 2009 Location: atlanta Age: 22 Posts: 20 Trader Rating: (0)	bump...come on people i need it gone, make offers, thanks

03-04-2009, 03:51 PM	#20
chadca18s13 Leaky Injector Join Date: Nov 2008 Location: calgary, ab Age: 22 Posts: 67 Trader Rating: (1)	if you decide to part out, im interested in the injectors

03-04-2009, 04:09 PM	#21
minuszero_315 Join Date: Feb 2009 Location: atlanta Age: 22 Posts: 20 Trader Rating: (0)	is anyone interested in the turbo set up with injectors?....pm me

03-05-2009, 09:16 PM	#22
minuszero_315 Join Date: Feb 2009 Location: atlanta Age: 22 Posts: 20 Trader Rating: (0)	thank you for unlocking, anyways new price. Price is $3000 i really need this gone folks i am unemployed (not trying to be all sobby and sh*t but this was what I was planning on getting me by for the time being)

09-13-2009, 08:20 PM	#23
djstatistics Join Date: Sep 2009 Location: Bay Area Age: 18 Posts: 41 Trader Rating: (0)	Will you be will to sell the tranny itself?

09-13-2009, 08:26 PM	#24
Zacho Premium Member Join Date: Jun 2007 Location: Canadur Posts: 89 Trader Rating: (4)	I could be interested in turbo/mani/dp/lines. Send me a PM with what your looking for if your willing to part it.

09-13-2009, 11:06 PM	#26
*racerx2k1* 244 Join Date: Jan 2004 Location: Nowhere Posts: 7,687 Trader Rating: (0)	Last Activity: 04-04-2009 12:55 AM __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/sale-items/241736-rb20det-modded-300-400-hp-nice-clean.html
Posted By	For	Type	Date	Hits
Everything about rb20det - Yahoo! Glue	This thread	Refback	04-03-2009 02:23 AM	1