240sx clutch problem... auto - 5 speed - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gt2871r · 05-25-2009, 12:35 PM

okay, so i swapped over to 5speed about a year ago and have been too lazy up until now to figure out this problem i have. my clutch works perfectly fine, but when i push it in and it comes back up it doesn't come all the way back up. it stays down about an inch or two and then i have to pull it up the rest of the way with my toe. anyone know what this could be?

nizola · 05-26-2009, 12:41 PM

is there supposed to be a spring going from the top of the pedal arm to the pedal box to pull it out?

*Souljahzs13* · 05-26-2009, 01:24 PM

I actually just fixed that problem. It can be an old worn out clutch pedal where the spring has grinded down the hook on the pedal where it sits. Or it can the your worn out clutch master cylinder if it is not new. But make sure you try and bleed it right again before you replace anything, and check for leaks

gt2871r · 05-26-2009, 04:50 PM

okay thank you very much! looked all over for the answer to this but couldn't find it

05-25-2009, 12:35 PM	#1
gt2871r Join Date: Apr 2009 Location: Calgary, AB Posts: 45 Trader Rating: (0)	240sx clutch problem... auto - 5 speed okay, so i swapped over to 5speed about a year ago and have been too lazy up until now to figure out this problem i have. my clutch works perfectly fine, but when i push it in and it comes back up it doesn't come all the way back up. it stays down about an inch or two and then i have to pull it up the rest of the way with my toe. anyone know what this could be?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-26-2009, 12:41 PM	#2
nizola Join Date: May 2009 Location: murrieta Age: 24 Posts: 1 Trader Rating: (0)	is there supposed to be a spring going from the top of the pedal arm to the pedal box to pull it out?

05-26-2009, 01:24 PM	#3
Souljahzs13 SingleCam Slam Join Date: Nov 2008 Location: five6deuce Posts: 278 Trader Rating: (21)	I actually just fixed that problem. It can be an old worn out clutch pedal where the spring has grinded down the hook on the pedal where it sits. Or it can the your worn out clutch master cylinder if it is not new. But make sure you try and bleed it right again before you replace anything, and check for leaks

05-26-2009, 04:50 PM	#4
gt2871r Join Date: Apr 2009 Location: Calgary, AB Posts: 45 Trader Rating: (0)	okay thank you very much! looked all over for the answer to this but couldn't find it

Sponsored Links