Haltech KA Patch Harnesses

johngriff · 03-07-2008, 06:43 PM

With the success of the SR20 patch harness for the haltech over the last two years, I am looking to draw schematics for these. Please only vote if you have the funds, and are seriously looking for a plug and play EMS solution for your KA powered car.

Thanks,

John

johngriff · 03-19-2008, 03:47 PM

Ok, I am getting started on the S13 KA24DE E8 harness today.

downshift_sideways · 03-19-2008, 04:16 PM

Damn. Very nice. How much time is involved creating the harness?

johngriff · 03-19-2008, 04:21 PM

about 10 hours for the diagrams, then it could be weeks or months pending submission to haltech for manufacturing, IF they decide to pick it up. Other wise, I might manufacture them in house.

How many of you want to go Individual coils? I could make the harness so that you could either run the stock single coil + dist, or just use the dist for timing the engine and 4 LS1 coils (about $300) for individual coils.

It would be like a dual purpose harness.

View Poll Results: I need a Haltech Patch Harness for My:
KA24E S13 Using a Haltech E6X ECU ($1200 MSRP)	1	6.25%
KA24E S13 Using a Haltech E8 ECU ($1475 MSRP)	2	12.50%
KA24DE S13 Using a Haltech E6X ECU ($1200 MSRP)	4	25.00%
KA24DE S13 Using a Haltech E8 ECU ($1475 MSRP)	5	31.25%
KA24DE S14s1 Using a Haltech E8 ECU ($1475 MSRP)	2	12.50%
KA24DE S14s2 Using a Haltech E8 ECU ($1475 MSRP)	2	12.50%
Voters: 16. You may not vote on this poll

03-07-2008, 06:43 PM	#1 (permalink)
johngriff Post Whore! Join Date: Jun 2004 Location: Folsom, CA Posts: 3,617 Trader Rating: (1) Rides Gallery: johngriff	Haltech KA Patch Harnesses With the success of the SR20 patch harness for the haltech over the last two years, I am looking to draw schematics for these. Please only vote if you have the funds, and are seriously looking for a plug and play EMS solution for your KA powered car. Thanks, John __________________ RPSport Tuning John @ RPSport.net 562.489.5016

03-19-2008, 03:47 PM	#2 (permalink)
johngriff Post Whore! Join Date: Jun 2004 Location: Folsom, CA Posts: 3,617 Trader Rating: (1) Rides Gallery: johngriff	Ok, I am getting started on the S13 KA24DE E8 harness today. __________________ RPSport Tuning John @ RPSport.net 562.489.5016

03-19-2008, 04:21 PM	#4 (permalink)
johngriff Post Whore! Join Date: Jun 2004 Location: Folsom, CA Posts: 3,617 Trader Rating: (1) Rides Gallery: johngriff	about 10 hours for the diagrams, then it could be weeks or months pending submission to haltech for manufacturing, IF they decide to pick it up. Other wise, I might manufacture them in house. How many of you want to go Individual coils? I could make the harness so that you could either run the stock single coil + dist, or just use the dist for timing the engine and 4 LS1 coils (about $300) for individual coils. It would be like a dual purpose harness. __________________ RPSport Tuning John @ RPSport.net 562.489.5016

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links
Remove these ads by purchasing a Premium Membership with Zilvia.net!

03-19-2008, 04:16 PM	#3 (permalink)
downshift_sideways In time-out for misbehaving. Join Date: Jan 2006 Location: San Leandro,CA. . . . . [The REAL Bay Area] Age: 22 Posts: 5,413 Trader Rating: (0) Rides Gallery: downshift_sideways	Damn. Very nice. How much time is involved creating the harness?