Hi, We're Big Country Labs and we make BIG WINGS - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*brndck* · 08-05-2012, 09:39 PM

FUCK man, think this would fit my xterra???

*LuckyRPS13* · 08-05-2012, 11:03 PM

I either want to go with out a spoiler all together or do a huge GT wing like this on my S13.5 build. This is so tempting.

redclaw05 · 08-06-2012, 12:27 AM

Quote:

First off, Sy is.... THE MAN!

Second, can you get us your trunk width in inches at the very back and 13" forward? IS300 trunk is pretty flat from what I can remember, so the universal application may fit. If not we'd have to take a look at a car in person to ensure a good fit.

I will measure it tomorrow. thanks mate.

rebornS14 · 08-06-2012, 02:38 AM

great deal and you guys are local. will be aboard soon.

PureRush · 08-06-2012, 03:16 AM

Zilvia votes for: PICS ON A HATCH

*hOngsterr* · 08-06-2012, 09:25 AM

haha i just went to the fair!
but yess if you need any hatch fitments for s13 lmk

STR8 H8N · 08-06-2012, 09:36 AM

350z love?

mangoes · 08-06-2012, 10:53 AM

let me know if you guys need to test fit on an Evo X, and i'm local, totally down for this =D.

*s13silvia123* · 08-06-2012, 12:02 PM

are these adjustable???

RACEBREAD · 08-06-2012, 12:57 PM

i want to order one is there anyway i can get it befor september 14th?

BTW its for S13 coupe

*GSXRJJordan* · 08-06-2012, 01:55 PM

Quote:

Originally Posted by Karlitos

Just wondering. Is there any CFD work? Or is it just a looks wing?

I talked to Darren about the profile and compared it to a couple of heavily CFD'd wings we had here at the shop - his design has a lot of camber, and should do well at big angle, even with a Gourney flap. Definitely not a 'just for looks' wing, especially at the 67" span up in clean air.

Quote:

Originally Posted by s13silvia123

are these adjustable???

I believe the stands have multiple holes drilled for adjustment, I didn't see provisions for a threaded adjuster - most wing builders prefer the swiss-cheese, multiple-hole approach since you know it'll be level left-to-right and it's more reliable.

Big Country Labs · 08-06-2012, 08:26 PM

Quote:

Originally Posted by brndck

FUCK man, think this would fit my xterra???

well.... I think it would fit in your xterra, it fits in my FJ

Quote:

Originally Posted by LuckyRPS13

I either want to go with out a spoiler all together or do a huge GT wing like this on my S13.5 build. This is so tempting.

yes.... you're getting closer my child..... feel the rice coursing through your veins..

Quote:

Originally Posted by redclaw05

I will measure it tomorrow. thanks mate.

Great! Shoot us an email to holler@bigcountrylabs.com

Quote:

Originally Posted by rebornS14

great deal and you guys are local. will be aboard soon.

Quote:

Originally Posted by PureRush

Zilvia votes for: PICS ON A HATCH

ASAP... promise!

Quote:

Originally Posted by STR8 H8N

350z love?

Definitely looking at the 350Z, but right now we're just gauging interest. Expect it to happen though.

Quote:

Originally Posted by mangoes

let me know if you guys need to test fit on an Evo X, and i'm local, totally down for this =D.

I think we may have to hit you up for pictures! Is yours the megalow evo I've seen scraping around Villa Park?

Quote:

Originally Posted by s13silvia123

are these adjustable???

Yes, adjustable pitch by multiple holes on the mounts.

Quote:

Originally Posted by RACEBREAD

i want to order one is there anyway i can get it befor september 14th?

BTW its for S13 coupe

We can try for you, but no guarantees

we do deal with small local companies to get all of our components and that often throws a wrench in the works. In the future we will have them stocked. Have fun at no coast party time super drifty bash party!

Big Country Labs · 08-06-2012, 08:27 PM

Quote:

Originally Posted by GSXRJJordan

I talked to Darren about the profile and compared it to a couple of heavily CFD'd wings we had here at the shop - his design has a lot of camber, and should do well at big angle, even with a Gourney flap. Definitely not a 'just for looks' wing, especially at the 67" span up in clean air.

I believe the stands have multiple holes drilled for adjustment, I didn't see provisions for a threaded adjuster - most wing builders prefer the swiss-cheese, multiple-hole approach since you know it'll be level left-to-right and it's more reliable.

Thanks for the kind words JJ!

turbociv910 · 08-06-2012, 09:36 PM

awesome, i can't use one, but would if i could

wanabedrftr · 08-06-2012, 10:40 PM

You guys still have room for the pre-order. I'm interested in the non-cutout style for a hatch.

Shipped to 32304.

mangoes · 08-06-2012, 11:23 PM

Quote:

Originally Posted by Big Country Labs

I think we may have to hit you up for pictures! Is yours the megalow evo I've seen scraping around Villa Park?

Guilty =D. I've since raised my car up though because I've moved to LA for school =( but, if I get your wing, I'd be totally down to slam it again for a shoot HAHA.

*TougeLabs* · 08-07-2012, 11:44 AM

Been trying to get in touch with you guys, your phones working ?

Big Country Labs · 08-07-2012, 12:59 PM

Quote:

Originally Posted by wanabedrftr

You guys still have room for the pre-order. I'm interested in the non-cutout style for a hatch.

Shipped to 32304.

Howdy!

Still have room

shipping is $60, wing price is $530, and you can order through our website here:
Big Country Labs - GT Wings done right for FC, S13, S14, S2000, and FD

Big Country Labs · 08-07-2012, 01:01 PM

Quote:

Originally Posted by mangoes

Guilty =D. I've since raised my car up though because I've moved to LA for school =( but, if I get your wing, I'd be totally down to slam it again for a shoot HAHA.

Sounds like a good time! Except the moving to LA part.

We're getting it tested on an evo at Rally Innovations right now but I'll probably have to hit you up for that photoshoot

Big Country Labs · 08-07-2012, 01:04 PM

Quote:

Originally Posted by TougeLabs

Been trying to get in touch with you guys, your phones working ?

Sorry about that, it just two of us putting this deal on, and my Partner Darren is out of town for the week enjoying the beautiful blue water at Tahoe.

Feel free to give me a call at (714) 931-3280 - if I don't answer I'll for sure call you back, but email I always quicker; Colin@bigcountrylabs.com

thisisastickup · 08-08-2012, 04:19 PM

hm. maybe I'll buy one of these. are the end plates removable? like could I make my own? could I get it for less without posts and endplates?

Big Country Labs · 08-09-2012, 05:50 PM

Quote:

Originally Posted by thisisastickup

hm. maybe I'll buy one of these. are the end plates removable? like could I make my own? could I get it for less without posts and endplates?

Definitely! shoot me an email to coiln@bigcountrylabs.com and we'll get you some pricing.

End plates don't come on the wing, but it comes with hardware and threaded holes. You could put sandwiches, paper plates, whatever you want on the end of there

yodc · 08-10-2012, 02:27 AM

Hope to see these all over town, its like a whip flag lol! Some one paint it bright orange

niscur29 · 08-10-2012, 06:21 PM

God dammit!!! Why couldnt i have seen this earlier!!!

Big Country Labs · 08-13-2012, 01:39 PM

Quote:

Originally Posted by yodc

Hope to see these all over town, its like a whip flag lol! Some one paint it bright orange

BCL owners are required to high five if they see each other on the road

Big Country Labs · 08-13-2012, 05:13 PM

S13 folks - your world is exploding

*roboticnissan* · 08-13-2012, 06:04 PM

Do the non cutout stands set the wing farther back?

Big Country Labs · 08-13-2012, 08:01 PM

Yep! It has more of a slope backwards and moves the wing a few inches back

hypercrush · 08-13-2012, 08:40 PM

Stew car makes me swoon! So hot, so hot. The Texas sticker was fun to make also, looks sweet on that glorious wing

Big Country Labs · 08-14-2012, 08:50 AM

Here's a little profile illustration that shows the difference in rake between the cutout/solid uprights. It's not to scale - the man-height solid uprights are taller than the cutout uprights.

Dylan, everything you've done on Stew's car has been top-notch.

08-05-2012, 09:39 PM	#31
brndck Premium Member Join Date: Jun 2003 Location: north san diego county, ca Age: 31 Posts: 6,769 Trader Rating: (95) Rides Gallery: brndck Feedback Score: 95 reviews	FUCK man, think this would fit my xterra??? __________________ I am the future Eric Castro http://outslidersandsmokeproduce.blogspot.com/

08-06-2012, 02:38 AM	#34
rebornS14 Zilvia FREAK! Join Date: Jun 2008 Location: Cerritos, CA Posts: 1,025 Trader Rating: (9) Feedback Score: 9 reviews	great deal and you guys are local. will be aboard soon. __________________ http://wheelflip.com/r/RebornS14

08-06-2012, 10:53 AM	#38
mangoes Zilvia Addict Join Date: Oct 2005 Location: Riverside and OC Age: 22 Posts: 894 Trader Rating: (14) Feedback Score: 14 reviews	let me know if you guys need to test fit on an Evo X, and i'm local, totally down for this =D. __________________ Little Wang // Outside Family

08-06-2012, 12:02 PM	#39
s13silvia123 Premium Member Join Date: May 2006 Location: where waldo is Age: 31 Posts: 2,759 Trader Rating: (9) Feedback Score: 9 reviews	are these adjustable??? __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

08-06-2012, 09:36 PM	#44
turbociv910 Zilvia Member Join Date: Oct 2011 Location: wilmington nc Age: 24 Posts: 244 Trader Rating: (0) Feedback Score: 0 reviews	awesome, i can't use one, but would if i could __________________ www.carolinadyno.com s13 LSx turbo drag car- 1.42 60 ft, 6.32 1/8

08-05-2012, 11:03 PM	#32
LuckyRPS13 Premium Member Join Date: Mar 2009 Location: Louisville Ky Age: 30 Posts: 566 Trader Rating: (11) Feedback Score: 11 reviews	I either want to go with out a spoiler all together or do a huge GT wing like this on my S13.5 build. This is so tempting.

08-06-2012, 03:16 AM	#35
PureRush Zilvia Addict Join Date: Oct 2011 Location: Orange County Posts: 763 Trader Rating: (13) Feedback Score: 13 reviews	Zilvia votes for: PICS ON A HATCH

08-06-2012, 09:36 AM	#37
STR8 H8N Zilvia Junkie Join Date: Jan 2011 Location: NEW CASTLE, PA Age: 28 Posts: 595 Trader Rating: (0) Feedback Score: 0 reviews	350z love?

08-06-2012, 12:57 PM	#40
RACEBREAD Leaky Injector Join Date: Jan 2009 Location: New Mexico Age: 23 Posts: 106 Trader Rating: (0) Feedback Score: 0 reviews	i want to order one is there anyway i can get it befor september 14th? BTW its for S13 coupe

08-06-2012, 10:40 PM	#45
wanabedrftr Zilvia Member Join Date: Jan 2011 Location: Orlando/Tally Age: 23 Posts: 254 Trader Rating: (0) Feedback Score: 0 reviews	You guys still have room for the pre-order. I'm interested in the non-cutout style for a hatch. Shipped to 32304. __________________ fifteen52

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

08-07-2012, 11:44 AM	#47
TougeLabs Premium Member Join Date: Jan 2007 Location: New York Age: 28 Posts: 1,467 Trader Rating: (7) Feedback Score: 7 reviews	Been trying to get in touch with you guys, your phones working ?

08-08-2012, 04:19 PM	#51
thisisastickup Zilvia Junkie Join Date: May 2009 Location: New Lenox, IL Age: 20 Posts: 363 Trader Rating: (0) Feedback Score: 0 reviews	hm. maybe I'll buy one of these. are the end plates removable? like could I make my own? could I get it for less without posts and endplates?

08-10-2012, 02:27 AM	#53
yodc Zilvia Junkie Join Date: Sep 2008 Location: 714/hb Age: 25 Posts: 302 Trader Rating: (21) Feedback Score: 21 reviews	Hope to see these all over town, its like a whip flag lol! Some one paint it bright orange

08-10-2012, 06:21 PM	#54
niscur29 Zilvia Junkie Join Date: Mar 2010 Location: Back IN FL, bring nice cars to the fail state! Age: 32 Posts: 404 Trader Rating: (12) Feedback Score: 12 reviews	God dammit!!! Why couldnt i have seen this earlier!!!

08-13-2012, 05:13 PM	#56
Big Country Labs Leaky Injector Join Date: Apr 2011 Location: Orange, CA Posts: 95 Trader Rating: (2) Feedback Score: 2 reviews	S13 folks - your world is exploding __________________ http://www.bigcountrylabs.com www.facebook.com/bigcountrylabs

08-13-2012, 06:04 PM	#57
roboticnissan Premium Member Join Date: Mar 2007 Location: SOCAL/NORCAL Age: 24 Posts: 1,827 Trader Rating: (12) Feedback Score: 12 reviews	Do the non cutout stands set the wing farther back? __________________

08-13-2012, 08:01 PM	#58
Big Country Labs Leaky Injector Join Date: Apr 2011 Location: Orange, CA Posts: 95 Trader Rating: (2) Feedback Score: 2 reviews	Yep! It has more of a slope backwards and moves the wing a few inches back __________________ http://www.bigcountrylabs.com www.facebook.com/bigcountrylabs

08-13-2012, 08:40 PM	#59
hypercrush Zilvia Junkie Join Date: Jun 2010 Location: Phoenix AZ Age: 29 Posts: 326 Trader Rating: (0) Feedback Score: 0 reviews	Stew car makes me swoon! So hot, so hot. The Texas sticker was fun to make also, looks sweet on that glorious wing __________________ the ELEVENS' facebook

08-14-2012, 08:50 AM	#60
Big Country Labs Leaky Injector Join Date: Apr 2011 Location: Orange, CA Posts: 95 Trader Rating: (2) Feedback Score: 2 reviews	Here's a little profile illustration that shows the difference in rake between the cutout/solid uprights. It's not to scale - the man-height solid uprights are taller than the cutout uprights. Dylan, everything you've done on Stew's car has been top-notch. __________________ http://www.bigcountrylabs.com www.facebook.com/bigcountrylabs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode