S13 Center Vent Angled Triple 52mm Gauge Plates - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Broadfield · 05-26-2011, 06:16 PM

S13 Center Vent Angled Triple 52mm Gauge Plates: $75 shipped
Please inquire if you would like non-angled 52mm or 60mm

NOTE: Please allow up to a week for the fabrication. These are made to order!

Main plate is CNC'd from 1/8" aluminum
Inside radius of the gauge openings are beveled so the gauge will drop in when angled
ABS angled rings are prepped to remove all casting nubs
ABS angled rings are trued on the bottom side as they do not come 100% flat
Main plate and rings are texture coated for OEM look
Painted with high quality SEM Satin Black
Includes aluminum mounting brackets that can be modified to fit your particular gauge(see pics below)
The mounts can also be modified to make a rock solid mounting system for the dash(see pics below)

Close up of texture coat and SEM paint:

Rings are 100% flat on the bottom:

Example of modified bracket to fit a specific gauge:

Example of how you could drill and tap the modified brackets and insert threaded rod into it. Then simply use some aluminum or other material to make a "washer" to span the back of the vent opening. Finally some simple wing nuts and you can easily attach it all from the back. This will also help really suck the plate into the opening of the dash.

UPDATE:

As I have mentioned in this thread, I can have any combination of gauge placements fabricated. For example: Chase from Chase Bays wanted a plate with one 52mm at the end and that was it. No problem! I can also do triple 60mm non-angled, double 52mm with vent angled or non-angled, any # of 52mm or 60mm from 1-3 or any combination of. Note: these are all special order so allow up to 4 weeks for delivery. Price is the same($75 shipped) for all angled plates and $40 shipped for non-angled. NOTE: 60mm cannot be angled in the standard fashion. All pieces are finished just like everything else: textured and painted with high quality satin black to best match the OEM finish of your S13.

Some Examples:

Triple 60mm:

Dual 52mm with vent:

Dual 52mm angled with vent:

ka24det92 · 05-26-2011, 06:29 PM

do you make a dual gauge holder

Broadfield · 05-26-2011, 07:07 PM

Quote:

Originally Posted by ka24det92

do you make a dual gauge holder

I do not because there is no demand for them. However, I can have one CNC'd if you would like. It would probably be a month or more though before I put in another order to the metal shop.

I do have a dual 52mm holder, but it has the slots in between for the vent to still function somewhat as a vent. You could still do the angled rings on it if you wanted. Otherwise like I said above, if you want the dual holder without the vent openings, then I would have to special order it the next time I place an order.

Thanks,

Toby

pandaroo · 05-26-2011, 07:11 PM

this is rad. just gotta find me another guage to stick in there lol.

negrosx13 · 05-26-2011, 07:52 PM

How much if I only wanted the rings and brackets to angle the gauges.. I already have vent pod holder very similar.

Ramonesfreak2010 · 05-26-2011, 08:52 PM

I just need the brackets. I bought the gauge plate a few months back.

Broadfield · 05-26-2011, 09:05 PM

Quote:

Originally Posted by negrosx13

How much if I only wanted the rings and brackets to angle the gauges.. I already have vent pod holder very similar.

Sorry, I do not sell them separately. However, you can get some from Summit.

Quote:

Originally Posted by Ramonesfreak2010

I just need the brackets. I bought the gauge plate a few months back.

I cannot sell the brackets separately as they come with the angled rings.

cookie_monster · 05-27-2011, 02:05 AM

Dammm I so want this!!! Maybe when i get paid ill get this if you still have a set left.

*va240dude* · 05-27-2011, 04:56 AM

Nice job Toby, glad somebody thought of making this a complete kit! I might have to pick one of these up from you soon! Bump for quality work.

CC200SX · 05-27-2011, 05:14 AM

Excelent kit, top job!

Post to Portugal?

sidewaysil80 · 05-27-2011, 05:14 AM

not that i need to, but i can vouch for toby's work. it is above and beyond ANYTHING i've ever seen in 7 years of being an automotive enthusiast. i'm debating starting an s13 overhaul/restoration for a dd...if i do i'll be taking one of these.

cjmirabal1 · 05-27-2011, 09:29 AM

NICE!!!! an angled dual pod with vents (florida heat!! need ac!)
would be amazing!!!

Psycho 240 Freak · 05-27-2011, 11:33 AM

Nice, I've been wanting these for a while now. I've purchased from you before, but it's been a while. You do paypal right? Can you send me your paypal info or whichever payment method you'd like?

wisdom01 · 05-27-2011, 12:15 PM

Great job on this kit. they look sweet!

Lucas180 · 05-27-2011, 03:13 PM

How do i buy a set ?

Broadfield · 05-27-2011, 06:39 PM

Quote:

Originally Posted by cookie_monster

Dammm I so want this!!! Maybe when i get paid ill get this if you still have a set left.

I will always have them available

Quote:

Originally Posted by va240dude

Nice job Toby, glad somebody thought of making this a complete kit! I might have to pick one of these up from you soon! Bump for quality work.

Thanks Matt!

Quote:

Originally Posted by CC200SX

Excelent kit, top job!

Post to Portugal?

Add $10

Quote:

Originally Posted by sidewaysil80

not that i need to, but i can vouch for toby's work. it is above and beyond ANYTHING i've ever seen in 7 years of being an automotive enthusiast. i'm debating starting an s13 overhaul/restoration for a dd...if i do i'll be taking one of these.

Thanks Tim, I appreciate the feedback.

Quote:

Originally Posted by Psycho 240 Freak

Nice, I've been wanting these for a while now. I've purchased from you before, but it's been a while. You do paypal right? Can you send me your paypal info or whichever payment method you'd like?

Quote:

Originally Posted by Lucas180

How do i buy a set ?

I prefer Paypal: toby.broadfield@gmail.com

Please enter in the comments box what the payment is for.

Thanks guys!

Psycho 240 Freak · 05-28-2011, 03:55 AM

Sweet, payment sent.

Broadfield · 05-28-2011, 03:38 PM

Quote:

Originally Posted by Psycho 240 Freak

Sweet, payment sent.

Thanks man, I'll get it shipped out next week. You will receive a tracking # from Paypal once it ships.

Thanks,

Toby

zspeedrft · 05-28-2011, 03:41 PM

are these rhd friendly??

Broadfield · 05-28-2011, 03:52 PM

Quote:

Originally Posted by zspeedrft

are these rhd friendly??

Yep! The main plate would simply be rotated 180 degrees compared to mounting it in a LHD.

feadz · 05-28-2011, 09:31 PM

How much for a non-angled triple 60mm? I need to fit some Defi BF's.

Broadfield · 05-28-2011, 10:23 PM

Quote:

Originally Posted by feadz

How much for a non-angled triple 60mm? I need to fit some Defi BF's.

It would be $40 shipped and would have the same textured finish.

Thanks,

Toby

BiG MiKE86 · 05-29-2011, 06:28 PM

fawkk... I wants...

Jtuned_andy · 05-29-2011, 06:44 PM

Are there 60mm angle spacers available?

Broadfield · 05-29-2011, 10:53 PM

Quote:

Originally Posted by Jtuned_andy

Are there 60mm angle spacers available?

There is not.... it's not really possible physically without going to full molded fabrication. Even then it would be too tight for my liking.

Jonathong · 05-30-2011, 01:47 AM

damn if only there was something like this for the s14! I really need a setup like this somewhere in the car

RickyS13. · 05-30-2011, 02:28 AM

im really gonna be getting one of these when my gauges come in!!

tabasco122 · 05-30-2011, 03:01 AM

do you mount\glue the rings on the plate, or do they have to be assembled? because i attempted to do this with the autometer rings after seeing your car in the magazine a few months ago, but i failed at getting them all straight, they were all different angles lol.

ka24det92 · 05-30-2011, 07:41 AM

Quote:

Originally Posted by Broadfield

I do not because there is no demand for them. However, I can have one CNC'd if you would like. It would probably be a month or more though before I put in another order to the metal shop.

I do have a dual 52mm holder, but it has the slots in between for the vent to still function somewhat as a vent. You could still do the angled rings on it if you wanted. Otherwise like I said above, if you want the dual holder without the vent openings, then I would have to special order it the next time I place an order.

Thanks,

Toby

that's what im looking for how much is the one with the vents

CC200SX · 05-30-2011, 07:50 AM

Quote:

Originally Posted by Broadfield

Add $10

Hi can you ad to the kit 2 more angle spacers, because i have 5 gauges?

05-26-2011, 06:16 PM	#1
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 39 Posts: 2,470 Trader Rating: (131) Feedback Score: 131 reviews	S13 Center Vent Angled Triple 52mm Gauge Plates S13 Center Vent Angled Triple 52mm Gauge Plates: $75 shipped Please inquire if you would like non-angled 52mm or 60mm NOTE: Please allow up to a week for the fabrication. These are made to order! Main plate is CNC'd from 1/8" aluminum Inside radius of the gauge openings are beveled so the gauge will drop in when angled ABS angled rings are prepped to remove all casting nubs ABS angled rings are trued on the bottom side as they do not come 100% flat Main plate and rings are texture coated for OEM look Painted with high quality SEM Satin Black Includes aluminum mounting brackets that can be modified to fit your particular gauge(see pics below) The mounts can also be modified to make a rock solid mounting system for the dash(see pics below) Close up of texture coat and SEM paint: Rings are 100% flat on the bottom: Example of modified bracket to fit a specific gauge: Example of how you could drill and tap the modified brackets and insert threaded rod into it. Then simply use some aluminum or other material to make a "washer" to span the back of the vent opening. Finally some simple wing nuts and you can easily attach it all from the back. This will also help really suck the plate into the opening of the dash. UPDATE: As I have mentioned in this thread, I can have any combination of gauge placements fabricated. For example: Chase from Chase Bays wanted a plate with one 52mm at the end and that was it. No problem! I can also do triple 60mm non-angled, double 52mm with vent angled or non-angled, any # of 52mm or 60mm from 1-3 or any combination of. Note: these are all special order so allow up to 4 weeks for delivery. Price is the same($75 shipped) for all angled plates and $40 shipped for non-angled. NOTE: 60mm cannot be angled in the standard fashion. All pieces are finished just like everything else: textured and painted with high quality satin black to best match the OEM finish of your S13. Some Examples: Triple 60mm: Dual 52mm with vent: Dual 52mm angled with vent: __________________ Ask Broadfield Broadfield Custom Clusters Etc. Alpine & JVC Head Units S13 Center Vent Gauge Plates Viper Security & Remote Starters Speedhut Gauges For Sale Last edited by Broadfield; 05-15-2012 at 12:08 AM..

05-26-2011, 07:11 PM	#4
pandaroo Zilvia Member Join Date: Nov 2010 Location: panama city florida Posts: 165 Trader Rating: (1) Feedback Score: 1 reviews	this is rad. just gotta find me another guage to stick in there lol. __________________ 89 2tone coupe 2jzgte swap in progress

05-26-2011, 07:52 PM	#5
negrosx13 Zilvia Addict Join Date: Feb 2009 Location: Houston,tx Posts: 950 Trader Rating: (13) Feedback Score: 13 reviews	How much if I only wanted the rings and brackets to angle the gauges.. I already have vent pod holder very similar. __________________ MORE BACON STRIPS

05-27-2011, 04:56 AM	#9
va240dude Premium Member Join Date: Apr 2008 Location: 千葉県／Virginia Age: 31 Posts: 1,823 Trader Rating: (115) Feedback Score: 115 reviews	Nice job Toby, glad somebody thought of making this a complete kit! I might have to pick one of these up from you soon! Bump for quality work. __________________ 日本語を勉強している。

05-27-2011, 05:14 AM	#11
sidewaysil80 Zilvia FREAK! Join Date: Jun 2008 Location: virginia beach Age: 26 Posts: 1,374 Trader Rating: (16) Feedback Score: 16 reviews	not that i need to, but i can vouch for toby's work. it is above and beyond ANYTHING i've ever seen in 7 years of being an automotive enthusiast. i'm debating starting an s13 overhaul/restoration for a dd...if i do i'll be taking one of these. __________________ www.sumospeed.com THE Powertripper

05-26-2011, 06:29 PM	#2
ka24det92 Zilvia Junkie Join Date: Feb 2009 Location: houston Posts: 319 Trader Rating: (0) Feedback Score: 0 reviews	do you make a dual gauge holder

05-26-2011, 08:52 PM	#6
Ramonesfreak2010 Zilvia Junkie Join Date: Jul 2008 Location: Silver Spring, MD Age: 21 Posts: 359 Trader Rating: (4) Feedback Score: 4 reviews	I just need the brackets. I bought the gauge plate a few months back.

05-27-2011, 02:05 AM	#8
cookie_monster Leaky Injector Join Date: Feb 2010 Location: Sesame st Posts: 76 Trader Rating: (1) Feedback Score: 1 reviews	Dammm I so want this!!! Maybe when i get paid ill get this if you still have a set left.

05-27-2011, 05:14 AM	#10
CC200SX Leaky Injector Join Date: Dec 2007 Location: Portugal Posts: 132 Trader Rating: (2) Feedback Score: 2 reviews	Excelent kit, top job! Post to Portugal?

05-27-2011, 09:29 AM	#12
cjmirabal1 Leaky Injector Join Date: Aug 2010 Location: Tampa Age: 24 Posts: 138 Trader Rating: (2) Feedback Score: 2 reviews	NICE!!!! an angled dual pod with vents (florida heat!! need ac!) would be amazing!!!

05-27-2011, 11:33 AM	#13
Psycho 240 Freak Zilvia Member Join Date: May 2006 Location: Northern California Posts: 228 Trader Rating: (0) Feedback Score: 0 reviews	Nice, I've been wanting these for a while now. I've purchased from you before, but it's been a while. You do paypal right? Can you send me your paypal info or whichever payment method you'd like?

05-27-2011, 12:15 PM	#14
wisdom01 Zilvia Member Join Date: Apr 2006 Location: Honolulu Posts: 200 Trader Rating: (3) Feedback Score: 3 reviews	Great job on this kit. they look sweet!

05-27-2011, 03:13 PM	#15
Lucas180 Leaky Injector Join Date: May 2009 Location: Ontario Canada Age: 25 Posts: 78 Trader Rating: (0) Feedback Score: 0 reviews	How do i buy a set ?

05-28-2011, 03:55 AM	#17
Psycho 240 Freak Zilvia Member Join Date: May 2006 Location: Northern California Posts: 228 Trader Rating: (0) Feedback Score: 0 reviews	Sweet, payment sent.

05-28-2011, 03:41 PM	#19
zspeedrft Zilvia FREAK! Join Date: Apr 2008 Location: LoS AnGeLeS Age: 29 Posts: 1,107 Trader Rating: (43) Feedback Score: 43 reviews	are these rhd friendly?? __________________

Sponsored Links

Sponsored Links

05-28-2011, 09:31 PM	#21
feadz Join Date: Jun 2009 Location: ohio Age: 24 Posts: 19 Trader Rating: (2) Feedback Score: 2 reviews	How much for a non-angled triple 60mm? I need to fit some Defi BF's.

05-29-2011, 06:28 PM	#23
BiG MiKE86 Zilvia Addict Join Date: Mar 2007 Location: Ft. Lauderdale Age: 26 Posts: 837 Trader Rating: (8) Feedback Score: 8 reviews	fawkk... I wants... __________________

05-29-2011, 06:44 PM	#24
Jtuned_andy Zilvia Addict Join Date: Apr 2006 Location: East Coast Posts: 769 Trader Rating: (20) Rides Gallery: Jtuned_andy Feedback Score: 20 reviews	Are there 60mm angle spacers available? __________________

05-30-2011, 01:47 AM	#26
Jonathong Zilvia FREAK! Join Date: Nov 2009 Location: Central Valley, CA Posts: 1,517 Trader Rating: (14) Feedback Score: 14 reviews	damn if only there was something like this for the s14! I really need a setup like this somewhere in the car __________________ http://jonathongg.tumblr.com/

05-30-2011, 02:28 AM	#27
RickyS13. Leaky Injector Join Date: Sep 2010 Location: Phoenix Posts: 92 Trader Rating: (2) Feedback Score: 2 reviews	im really gonna be getting one of these when my gauges come in!!

05-30-2011, 03:01 AM	#28
tabasco122 Zilvia Junkie Join Date: Feb 2011 Location: Houma, LA Age: 24 Posts: 315 Trader Rating: (5) Feedback Score: 5 reviews	do you mount\glue the rings on the plate, or do they have to be assembled? because i attempted to do this with the autometer rings after seeing your car in the magazine a few months ago, but i failed at getting them all straight, they were all different angles lol.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/interior-exterior/387088-s13-center-vent-angled-triple-52mm-gauge-plates.html
Posted By	For	Type	Date	Hits
Central Heater Meterhouder - s13 - SXOC.NL Forum	This thread	Refback	03-24-2013 11:55 AM	22
S13 Center Vent Angled Triple 52mm Gauge Plates - s13 - SXOC.NL Forum	This thread	Refback	01-21-2013 07:00 AM	1
S13 Center Vent Angled Triple 52mm Gauge Plates - SXOC.NL Forum	This thread	Refback	06-15-2012 12:11 AM	29
S13 93' Coupe with Redtop build! - Page 3 - 240sxONE Forums	This thread	Refback	09-19-2011 03:57 PM	10