Bucket Seats on a Budget - Back due to Popular Demand - Round 4 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

carparthookup · 10-28-2009, 07:31 PM

The most epic seat groupbuy of all time now back on Zilvia for the fourth round!!!

- Our trusted line of full racing bucket seats.
- Each bucket seat is made from Fiberglass Reinforced Plastic (FRP)<--unless its the CF ones
- Wrapped in high quality ALCANTARA & CLOTH FABRIC.
- This deal can only be found on Zilvia!!!

SPECIAL NOTE: There will be 12 SLOTS open for the people of Zilvia just like before. When the 12 slots have been filled, the seats order will be placed and the seats will be manufactured. Once the seats have been manufactured they will ship out.

__________________________________________________ ___

How this works:
1. Place your deposit of at least 50% of the total value of the seat or seats (non-logo only).
2. We order the seats, and have them come over in a container from overseas.
3. (Local Customers) Seat comes in stock and you pay for the rest upon pickup.
3. (Non-Local Customers) We send you an invoice and you pay for the rest of the seat(s). The seats will then be shipped out to you.

Certain seats will be available with a "LOGO." All LOGO and full carbon fiber seats will need to be pre-paid in full.

If you have any questions feel free to contact us through PM or on AIM: carparthookup
__________________________________________________ ___
G3 Seat, JGTC Inspired seat.

MSRP: $1700/seat
AVAILABLE in BLACK ONLY or Red Only with LOGO SERVICE

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
Logo, CF overlay shell: $520
Logo, Real CF shell: $710

Dimensions: Our widest seat. Recommended for bigger taller guys!
Width Outer Shoulder Area: 23
Width Bottom, Widest Point: 23
Width Inner Shoulder Area: 12
Width Inner Lumbar Area:
Width Inner Seat Area: 14
Height: 36

__________________________________________________ __
VS3 Seat

Conservative design, just everything you need in a racing seat. Low max system equipped.

AVAILABLE in BLACK or RED
MSRP: $700/seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
Logo, CF overlay shell: $520
Logo, Real CF shell: $710

Dimensions: Our skinniest seat.
Width Outer Shoulder Area: 21.5
Width Bottom, Widest Point: 18.5
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 11
Width Inner Seat Area: 13
Height: 35

__________________________________________________ __
P2 Seat

P2 seat, A true motorsport racing shell virtually tailored to the driver's body. Its anatomically shaped frame, and excellent lateral support allow for maximal driver comfort under extreme stress.

AVAILABLE in BLACK or RED
MSRP: $700/Seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

(Only 2 Pairs Available!)
Logo, FRP shell: $500
logo, CF overlay shell: $600
logo, Real CF shell: $780

Dimensions: Wider than VS3, Skinnier than G3
Width Outer Shoulder Area: 23.5
Width Bottom, Widest Point: 18.5
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 12
Width Inner Seat Area:1 3
Height: 35
__________________________________________________ __
GS Seat, Reclinable Bucket Seat

GS seat, the reclining bucket seats. This seat sits super low for a bottom mount seat. Similar to the Bride Low max system. Beautifully upholstered with red stitching.

AVAILABLE in BLACK or RED, and Black with gradation.
MSRP: $1300/seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $440
No logo, CF overlay shell: $560
No logo, Real CF shell: $750

Logo, FRP shell: $520
Logo, CF overlay shell: $640
Logo, Real CF shell: $830

Dimensions:
Width Outer Shoulder Area: 22
Width Bottom, Widest Point: 19
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 10.5
Width Inner Seat Area: 13
Height: 33
__________________________________________________
CG Seat

CG Seats- Introducing the reclineable bucket with FRP/Carbon Kevlar shell/backing. This seat is one of the most popular in Japan, street, drift and time attack. Lightweight but with increased rigidity when compared to the discontinued B2 seats.

AVAILABLE in BLACK or RED or BLUE
MSRP: $800 per seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $440
No logo, CF overlay shell: $560
No logo, Real CF shell: $750

Logo, FRP shell: $520
Logo, CF overlay shell: $640
Logo, Real CF shell: $830

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 13
Width Inner Lumbar Area: 18
Width Inner Seat Area: 14
Height: 35

__________________________________________________ __

Non bucket seats are available for those of you looking for some with more comfort!
__________________________________________________ __
E2 and DG Seats

E2 seat and DG seat, introducing reclining seats are created for racing, with daily driveability and comfort in mind.

MSRP: $700/seat

Prices for A PAIR(for single, just take off half the price):
No logo, cloth: $350
No logo, CF overlay shell: $N/A
No logo, Real CF shell: $N/A

Logo, cloth: $490
Logo, CF overlay shell: $N/A
Logo, Real CF shell: $N/A

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 13
Width Inner Lumbar Area: 18
Width Inner Seat Area: 14
Height: 35
__________________________________________________ __
RSS Seat

RSS Seats aka Recaro SRD style seats, Eye-catching design keenly masks its superb comfort features. Underneath its racy looks and sporty styling are all the advanced engineering features and sophisticated technical details a performance-seeking driver could want.

AVAILABLE IN BLACK VINYL, BLACK CLOTH WITH RED STITCHING, OR RED
MSRP: $700/seat

No logo, Black vinyl: $300
No logo, Cloth: $300
No logo, Real CF shell: $N/A

No logo service for these seats.

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 11.5
Width Inner Lumbar Area:
Width Inner Seat Area: 13.5
Height: 35

NOTE:
- All blue and red seats are $20 more for the pair.

- All seats come with universal SLIDERS, but the bracket will need to be purchased separately.

__________________________________________________ __ __

Shipping is available! Shipping one seat will cost the same as a pair because the shipping rate is determined by dimensional weight; not actual weight.

Flat rate shipping for 48 continental states
Business address rate: $125 for US customers.
Residential addresss rate: $150 for US customers.

AK, PR, Hi, Canada, or any other international customers please contact me for a quote.

Payments:
- Local pickup
- Cash (bring cash, tax included)
- Paypal (3% paypal fee will apply for local pickup only)
- Credit card (9.75% CA tax will apply)
- Fill out our form for pre-order, and you are all set!

Out of town people
Paypal email address: Billing@sonicmotor.com

HOW TO ORDER:

1. Go to www.sonicmotor.com
2. Find the seat of your choice
3. Choose the seat trims of your choice
4. Add to cart
5. Enter code "nologo" for non-logo seats. (Only pay for half the value of the seat, non-logo ONLY)
6. Enter code "noship" (No need to pay for shipping until the seats arrive)

After that, your order is complete and you will be added to the group buy. Email me if you have any questions or run into any problems while ordering seats. Thanks.

If you have any questions or concerns, please PM or post.

Our Address:
315 Cloverleaf DR STE C
Baldwin Park, CA 91706
626-363-9036

Email: sonicmotor2000@yahoo.com
Aim: carparthookup
I'm online during regular business hours.

Open Regular Business Hours
Mon-Friday 9am-6pm
Sat. 9am-3pm
Sun. Closed

Cancellation is subject to a 15% restocking fee for non logo seats
Cancellation is subject to a 20%-restocking fee for seats with Logos.
_____________________________________________

Want to "test sit" a seat before purchasing? Come to our shop and take a seat in the seat you are intersted in. We have every single seat for you to "test sit."

Thank you everyone for your support!!!

carparthookup · 10-29-2009, 05:51 PM

What people have said about our seats.

Quote:

Originally Posted by peetiewonder

awesome seats superior quality.

Quote:

Originally Posted by Powered by Jay

Picked up my GS seat today. Good guys. Seat looks great. Thanks for setting up the deal guys.

Quote:

Originally Posted by nisco

My VS3s came today! they fit very nicely.
Thanks Jackson and crew!

Quote:

Originally Posted by s13 @ fullboost

Sweet looking seats =]

Quote:

Originally Posted by J40sx

Baller seats
for a good price...

Quote:

Originally Posted by ROUGE180

Just got my GS seat and it's GOOOODDD!!! Packing was great. The materials are great. The red stitching is not all jacked up. This is my first racing seat so I'm super excited. Now I'm just waiting on a seat rail and then it's going in. Thanks again JXN. I have done business with them before and I will do it again.

CARPARTHOOKUP IS THE SHIIZZZNITTTT!!!!

Quote:

Originally Posted by 240love

i have one of these in my car too and it rocks!!! feels way better than my sparco speed seat!

Quote:

Originally Posted by projectRDM

And that has what to do with anything? You're criticizing a quality product sold by a known and dependable Zilvia advertiser because the back of a comparable seat is carbon fiber? The back, where NO ONE will ever see it? Where a thin layer won't do shit for strength?

"Hey guys, the backside of my center console is carbon fiber, so is the underside of my carpet. It's so fucking hot."

+1 for superior product at an insanely low price.

[size="5"]

Quote:

Originally Posted by sleeper108

bump for the seats!

awesome pricing, customer service is #1.

I could use a sticker, since the entire interior of my car is from you guys! lol

noone needs to hesitate, even with the long wait from the last group buy, i would do it all again.

Quote:

Originally Posted by GSXRJJordan

I don't know what all this talk is about "other guys" and "shipping" and "ebay" - Jackson is a fucking stand-up guy, I'm happy every time I do business with him or any of the guys at Sonic Motor.

I came down there last week and sat in all of them (the only shop I've ever been to that has all their seats on display, so you can actually try them before buying), and fell in love with the GS reclinable. Tried to walk out of there today with their last one (logo/kevlar back) - he wouldn't sell it to me, and I had cash! Lol, they really want people to be able to try out every single one... oh well, my pre-order is in! Lets get these seats sold!

Quote:

Originally Posted by hpipro4

got mine thursday morning.....cant wait for the other seat! thnx

Quote:

Originally Posted by Powered by Jay

Picked up my GS seat today. Good guys. Seat looks great. Thanks for setting up the deal guys.

Quote:

Originally Posted by nisco

My VS3s came today! they fit very nicely.
Thanks Jackson and crew!

stricnynel0s · 10-31-2009, 03:49 AM

what are dimensions on the shipped box, i am in iraq, and i already got a full set of jdm aero in my garage and my mom is gunna kill me if i got a piano sized box in my garage sitting in there for 4 months

carparthookup · 10-31-2009, 11:39 AM

Quote:

Originally Posted by stricnynel0s

what are dimensions on the shipped box, i am in iraq, and i already got a full set of jdm aero in my garage and my mom is gunna kill me if i got a piano sized box in my garage sitting in there for 4 months

Its roughly 52x25x25

SuperiorS14 · 10-31-2009, 12:02 PM

damn! i wish i could buy these!!! but no one wants to buy my stuff! o well may be there will be a round 5....

NA4NOW · 10-31-2009, 05:23 PM

Whats the wait time on these seats? 2nd round group buy are all still waiting.

s13pignose · 11-01-2009, 03:28 PM

What has everyone been using as far as rails..any that bolt up?

*ms!3* · 11-01-2009, 03:33 PM

im using bc rails on mine.

brides are bolt up as well.

Andres_G · 11-01-2009, 05:32 PM

Are these replicas? (bootlegs)

burtoncr · 11-01-2009, 06:08 PM

Quote:

Originally Posted by Andres_G

Are these replicas? (bootlegs)

Yes, isnt it obvious?

*Ceepo* · 11-02-2009, 01:06 PM

hold up lol... im confused, what is the "logo" look like, is it say bride on the seat or something im lost....

burtoncr · 11-02-2009, 01:33 PM

Quote:

Originally Posted by Ceepo

hold up lol... im confused, what is the "logo" look like, is it say bride on the seat or something im lost....

Yes, depending on what the replica is, ie VS = Vios so the VS3 with logo service has a Bride logo, the P2 has a Recaro logo, etc.

NINJASPY · 11-02-2009, 04:05 PM

how long is the wait from when the group buy round ends to when we expect to receive??

has round 2 really not received their seats? how long have they been waiting?

NA4NOW · 11-02-2009, 04:36 PM

Quote:

Originally Posted by NINJASPY

how long is the wait from when the group buy round ends to when we expect to receive??

has round 2 really not received their seats? how long have they been waiting?

"Round 2" ended 8-26-09, ..so its been almost 10 weeks, so far. They still havent been shipped out from overseas, according to carparthookup,... do to some "unexpected delays". They said this is due to too many of the seats having "logo service".

IF they were to ship them the seats from overseas, tomorrow, we should receive them in another month or so. Maybe they can respond here, to let "round 3 and 4" buyers know how this will affect their order. I imagine it will push them back, as well.

driven_ · 11-02-2009, 04:45 PM

P2/VS3 would look so nice in my car.

wish i could afford one for now.

carparthookup · 11-02-2009, 06:56 PM

Sorry for not responding to the questions in this thread. I was having fun all Halloween weekend! haha.

Quote:

Originally Posted by s13pignose

What has everyone been using as far as rails..any that bolt up?

For the side mount seats we sell Buddy Club seat rails. For the bottom mount seats we sell custom seat brackets designed specifically to work with our seats. Bride brackets will work as well.

Quote:

Originally Posted by Ceepo

hold up lol... im confused, what is the "logo" look like, is it say bride on the seat or something im lost....

PM me if you have questions about the "logo" seats. Thanks.

Quote:

Originally Posted by NINJASPY

how long is the wait from when the group buy round ends to when we expect to receive??

has round 2 really not received their seats? how long have they been waiting?

The seats will take no more than 1 month to be manufactured, and it will take no more than 1 month for them to ship over. It is about a 2 month wait after the group buy closes.

NOTICE: This has been changed after group buy #2.

Quote:

Originally Posted by NA4NOW

Whats the wait time on these seats? 2nd round group buy are all still waiting.

Quote:

Originally Posted by NA4NOW

"Round 2" ended 8-26-09, ..so its been almost 10 weeks, so far. They still havent been shipped out from overseas, according to carparthookup,... do to some "unexpected delays". They said this is due to too many of the seats having "logo service".

IF they were to ship them the seats from overseas, tomorrow, we should receive them in another month or so. Maybe they can respond here, to let "round 3 and 4" buyers know how this will affect their order. I imagine it will push them back, as well.

Look bro. I've talked to you over the phone and you have been PM'ing me about this situation. You don't need to bring it into my other threads to cause drama. You clearly do not understand the situation and what I have been telling you these past few weeks. I even told you that we will refund your order if you don't want to wait any longer. I don't mean to be rude, but you are making false accusations that need to be corrected.

For anyone who is concerned by this, let me explain. My broker informed me that the seats would ship immediately after I placed the order. He was under the impression that my seat supplier had ALL seats in ALL trims pre-manufactured and ready to ship. This is not the case. The seats that are not pre-made will need to be manufactured. This will take no longer than ONE MONTH after the order has been placed, and no longer than ONE MONTH for the seats to arrive from overseas.

The reason why round #2 is taking so long is NOT because logo seats were ordered. It is because there was a large variety of different seats ordered in a number of different trims. Another delay was a Chinese holiday that we did not know about that lasts 2 whole weeks (kind of like their independence day). This caused a large delay in the seat manufacturing process. Those were the "unexpected delays" that we encountered.

Round 2 seats have been manufactured and shipped. They should be arriving here in the states as early as the 16th, and no later than the 23rd. Round 3 seats are being manufactured at this very moment. Everything is on schedule.

I hope that clears everything up. If you have any questions concerning the other group buys, please PM me. DO NOT post in this thread.

NA4NOW · 11-02-2009, 11:00 PM

Just to be clear, I didnt post here to cause drama, or make accusations. I think people here should know about the status of the Round 2 group buy, before they get in on this one. I would surely want to be informed.

Secondly, I WAS told over the phone that the delay was due to the logo service. And, I was told I could get a PARTIAL refund. I'll call you during the day, and we'll dicuss this. These people should know about problems with these orders, regaurdless.

sidedrifts13 · 11-02-2009, 11:11 PM

who has actual pics of these seats installed??????post them up please

carparthookup · 11-03-2009, 11:33 AM

Quote:

Originally Posted by sidedrifts13

who has actual pics of these seats installed??????post them up please

GS seat with our custom seat bracket

Which seat in particular were you looking for pictures?

sidedrifts13 · 11-03-2009, 02:12 PM

Im looking for pics for the E2'S what low bracket fit? he one you sell sit high right like shown on the pic

carparthookup · 11-03-2009, 02:43 PM

Quote:

Originally Posted by sidedrifts13

Im looking for pics for the E2'S what low bracket fit? he one you sell sit high right like shown on the pic

The GS and the CG seats are the lowest sitting reclinable seats.

If you want to sit lower, the VS3 sits the lowest with sliding rails.

ericb382 · 11-03-2009, 03:29 PM

Could you post up the weights of the bucket seats?

SilS13Coupe · 11-03-2009, 03:54 PM

Quote:

Originally Posted by ericb382

Could you post up the weights of the bucket seats?

+1 definitely interested in some of these seats.

Evan_Murphy · 11-03-2009, 05:22 PM

could you post up some of the vs3 seat pics?

carparthookup · 11-03-2009, 07:23 PM

Quote:

Originally Posted by ericb382

Could you post up the weights of the bucket seats?

The VS3 is about 23 lbs seat only.
The GS is about 40 lbs with seat bracket and reinforcement.

Quote:

Originally Posted by Evan_Murphy

could you post up some of the vs3 seat pics?

you mean in car pictures?

courtesy of blackrms13 (david), VS3 with buddy club rails from the first group buy!

*punxva* · 11-04-2009, 06:29 AM

Quote:

Originally Posted by carparthookup

GS seat with our custom seat bracket

Which seat in particular were you looking for pictures?

will you guys just sell me the custom seat bracket?

carparthookup · 11-04-2009, 09:00 AM

Yes of course!! PM us which seat you have and we will hit u back with price!

BracedEunos · 11-05-2009, 06:08 AM

Ugg.....this wait is killing me.

BTW, I was told that the CF seats are Full CF. Not a FRP seat with an outer layer of Carbon. Your OP says that each bucket seat is made with FRP. What gives?

carparthookup · 11-05-2009, 11:30 AM

And it is still true!

Full carbon is still full carbon

Changed the OP =P

DriftPanda · 11-07-2009, 09:38 PM

what's the widest seat you have?

11-01-2009, 03:28 PM	#7
s13pignose Zilvia FREAK! Join Date: Dec 2005 Location: ?? Posts: 1,173 Trader Rating: (2)	What has everyone been using as far as rails..any that bolt up? __________________ I need tein spanner wrenches shipped. PM me

11-01-2009, 03:33 PM	#8
ms!3 Zilvia FREAK! Join Date: Apr 2006 Location: USA Age: 20 Posts: 1,378 Trader Rating: (5)	im using bc rails on mine. brides are bolt up as well. __________________ http://wonvia.blogspot.com/

11-02-2009, 01:06 PM	#11
Ceepo Premium Member Join Date: Jan 2008 Location: Cedar City, Utah Posts: 1,665 Trader Rating: (6) Rides Gallery: Ceepo	hold up lol... im confused, what is the "logo" look like, is it say bride on the seat or something im lost.... __________________ 1995 240sx SE (current)

11-02-2009, 04:45 PM	#15
driven_ Zilvia Addict Join Date: Feb 2008 Location: Milwaukee is WIcked. Age: 17 Posts: 781 Trader Rating: (3)	P2/VS3 would look so nice in my car. wish i could afford one for now. __________________ Rust Loves Me.

11-04-2009, 09:00 AM	#27
carparthookup Zilvia.net Advertiser Join Date: Aug 2005 Location: Baldwin Park 626!! * AIM: Carparthookup * 626drift.com / SonicMotor.com Age: 25 Posts: 4,688 Trader Rating: (60)	Yes of course!! PM us which seat you have and we will hit u back with price! __________________ XXR wheels 521&522 Pre-order! Buddy club special Performance lighting special: 7x6 $29 HID Kits $58!! Want a bucket seat? On a budget? Click here GROUP BUY! BOSS KIT steering wheel Hubs and Quick releases starting at $19.95!

10-28-2009, 07:31 PM	#1
carparthookup Zilvia.net Advertiser Join Date: Aug 2005 Location: Baldwin Park 626!! * AIM: Carparthookup * 626drift.com / SonicMotor.com Age: 25 Posts: 4,688 Trader Rating: (60)	Bucket Seats on a Budget - Back due to Popular Demand - Round 4 The most epic seat groupbuy of all time now back on Zilvia for the fourth round!!! - Our trusted line of full racing bucket seats. - Each bucket seat is made from Fiberglass Reinforced Plastic (FRP)<--unless its the CF ones - Wrapped in high quality ALCANTARA & CLOTH FABRIC. - This deal can only be found on Zilvia!!! SPECIAL NOTE: There will be 12 SLOTS open for the people of Zilvia just like before. When the 12 slots have been filled, the seats order will be placed and the seats will be manufactured. Once the seats have been manufactured they will ship out. __________________________________________________ ___ How this works: 1. Place your deposit of at least 50% of the total value of the seat or seats (non-logo only). 2. We order the seats, and have them come over in a container from overseas. 3. (Local Customers) Seat comes in stock and you pay for the rest upon pickup. 3. (Non-Local Customers) We send you an invoice and you pay for the rest of the seat(s). The seats will then be shipped out to you. Certain seats will be available with a "LOGO." All LOGO and full carbon fiber seats will need to be pre-paid in full. If you have any questions feel free to contact us through PM or on AIM: carparthookup __________________________________________________ ___ G3 Seat, JGTC Inspired seat. MSRP: $1700/seat AVAILABLE in BLACK ONLY or Red Only with LOGO SERVICE Price per PAIR (for single seat, just take off half the price): No logo, FRP shell: $340 No logo, CF overlay shell: $440 No logo, Real CF shell: $630 Logo, FRP shell: $400 Logo, CF overlay shell: $520 Logo, Real CF shell: $710 Dimensions: Our widest seat. Recommended for bigger taller guys! Width Outer Shoulder Area: 23 Width Bottom, Widest Point: 23 Width Inner Shoulder Area: 12 Width Inner Lumbar Area: Width Inner Seat Area: 14 Height: 36 __________________________________________________ __ VS3 Seat Conservative design, just everything you need in a racing seat. Low max system equipped. AVAILABLE in BLACK or RED MSRP: $700/seat Price per PAIR (for single seat, just take off half the price): No logo, FRP shell: $340 No logo, CF overlay shell: $440 No logo, Real CF shell: $630 Logo, FRP shell: $400 Logo, CF overlay shell: $520 Logo, Real CF shell: $710 Dimensions: Our skinniest seat. Width Outer Shoulder Area: 21.5 Width Bottom, Widest Point: 18.5 Width Inner Shoulder Area: 11 Width Inner Lumbar Area: 11 Width Inner Seat Area: 13 Height: 35 __________________________________________________ __ P2 Seat P2 seat, A true motorsport racing shell virtually tailored to the driver's body. Its anatomically shaped frame, and excellent lateral support allow for maximal driver comfort under extreme stress. AVAILABLE in BLACK or RED MSRP: $700/Seat Price per PAIR (for single seat, just take off half the price): No logo, FRP shell: $340 No logo, CF overlay shell: $440 No logo, Real CF shell: $630 (Only 2 Pairs Available!) Logo, FRP shell: $500 logo, CF overlay shell: $600 logo, Real CF shell: $780 Dimensions: Wider than VS3, Skinnier than G3 Width Outer Shoulder Area: 23.5 Width Bottom, Widest Point: 18.5 Width Inner Shoulder Area: 11 Width Inner Lumbar Area: 12 Width Inner Seat Area:1 3 Height: 35 __________________________________________________ __ GS Seat, Reclinable Bucket Seat GS seat, the reclining bucket seats. This seat sits super low for a bottom mount seat. Similar to the Bride Low max system. Beautifully upholstered with red stitching. AVAILABLE in BLACK or RED, and Black with gradation. MSRP: $1300/seat Price per PAIR (for single seat, just take off half the price): No logo, FRP shell: $440 No logo, CF overlay shell: $560 No logo, Real CF shell: $750 Logo, FRP shell: $520 Logo, CF overlay shell: $640 Logo, Real CF shell: $830 Dimensions: Width Outer Shoulder Area: 22 Width Bottom, Widest Point: 19 Width Inner Shoulder Area: 11 Width Inner Lumbar Area: 10.5 Width Inner Seat Area: 13 Height: 33 __________________________________________________ CG Seat CG Seats- Introducing the reclineable bucket with FRP/Carbon Kevlar shell/backing. This seat is one of the most popular in Japan, street, drift and time attack. Lightweight but with increased rigidity when compared to the discontinued B2 seats. AVAILABLE in BLACK or RED or BLUE MSRP: $800 per seat Price per PAIR (for single seat, just take off half the price): No logo, FRP shell: $440 No logo, CF overlay shell: $560 No logo, Real CF shell: $750 Logo, FRP shell: $520 Logo, CF overlay shell: $640 Logo, Real CF shell: $830 Dimensions: Width Outer Shoulder Area: 21 Width Bottom, Widest Point: 21 Width Inner Shoulder Area: 13 Width Inner Lumbar Area: 18 Width Inner Seat Area: 14 Height: 35 __________________________________________________ __ Non bucket seats are available for those of you looking for some with more comfort! __________________________________________________ __ E2 and DG Seats E2 seat and DG seat, introducing reclining seats are created for racing, with daily driveability and comfort in mind. MSRP: $700/seat Prices for A PAIR(for single, just take off half the price): No logo, cloth: $350 No logo, CF overlay shell: $N/A No logo, Real CF shell: $N/A Logo, cloth: $490 Logo, CF overlay shell: $N/A Logo, Real CF shell: $N/A Dimensions: Width Outer Shoulder Area: 21 Width Bottom, Widest Point: 21 Width Inner Shoulder Area: 13 Width Inner Lumbar Area: 18 Width Inner Seat Area: 14 Height: 35 __________________________________________________ __ RSS Seat RSS Seats aka Recaro SRD style seats, Eye-catching design keenly masks its superb comfort features. Underneath its racy looks and sporty styling are all the advanced engineering features and sophisticated technical details a performance-seeking driver could want. AVAILABLE IN BLACK VINYL, BLACK CLOTH WITH RED STITCHING, OR RED MSRP: $700/seat No logo, Black vinyl: $300 No logo, Cloth: $300 No logo, Real CF shell: $N/A No logo service for these seats. Dimensions: Width Outer Shoulder Area: 21 Width Bottom, Widest Point: 21 Width Inner Shoulder Area: 11.5 Width Inner Lumbar Area: Width Inner Seat Area: 13.5 Height: 35 NOTE: - All blue and red seats are $20 more for the pair. - All seats come with universal SLIDERS, but the bracket will need to be purchased separately. __________________________________________________ __ __ Shipping is available! Shipping one seat will cost the same as a pair because the shipping rate is determined by dimensional weight; not actual weight. Flat rate shipping for 48 continental states Business address rate: $125 for US customers. Residential addresss rate: $150 for US customers. AK, PR, Hi, Canada, or any other international customers please contact me for a quote. Payments: - Local pickup - Cash (bring cash, tax included) - Paypal (3% paypal fee will apply for local pickup only) - Credit card (9.75% CA tax will apply) - Fill out our form for pre-order, and you are all set! Out of town people Paypal email address: Billing@sonicmotor.com HOW TO ORDER: 1. Go to www.sonicmotor.com 2. Find the seat of your choice 3. Choose the seat trims of your choice 4. Add to cart 5. Enter code "nologo" for non-logo seats. (Only pay for half the value of the seat, non-logo ONLY) 6. Enter code "noship" (No need to pay for shipping until the seats arrive) After that, your order is complete and you will be added to the group buy. Email me if you have any questions or run into any problems while ordering seats. Thanks. If you have any questions or concerns, please PM or post. Our Address: 315 Cloverleaf DR STE C Baldwin Park, CA 91706 626-363-9036 Email: sonicmotor2000@yahoo.com Aim: carparthookup I'm online during regular business hours. Open Regular Business Hours Mon-Friday 9am-6pm Sat. 9am-3pm Sun. Closed Cancellation is subject to a 15% restocking fee for non logo seats Cancellation is subject to a 20%-restocking fee for seats with Logos. _____________________________________________ Want to "test sit" a seat before purchasing? Come to our shop and take a seat in the seat you are intersted in. We have every single seat for you to "test sit." Thank you everyone for your support!!! __________________ XXR wheels 521&522 Pre-order! Buddy club special Performance lighting special: 7x6 $29 HID Kits $58!! Want a bucket seat? On a budget? Click here GROUP BUY! BOSS KIT steering wheel Hubs and Quick releases starting at $19.95! Last edited by carparthookup; 12-21-2009 at 07:25 PM.

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

10-31-2009, 03:49 AM	#3
stricnynel0s Leaky Injector Join Date: Feb 2005 Location: NJ Posts: 72 Trader Rating: (1)	what are dimensions on the shipped box, i am in iraq, and i already got a full set of jdm aero in my garage and my mom is gunna kill me if i got a piano sized box in my garage sitting in there for 4 months

10-31-2009, 12:02 PM	#5
SuperiorS14 Zilvia Addict Join Date: Feb 2007 Location: socal Age: 25 Posts: 675 Trader Rating: (12)	damn! i wish i could buy these!!! but no one wants to buy my stuff! o well may be there will be a round 5....

10-31-2009, 05:23 PM	#6
NA4NOW Leaky Injector Join Date: Jan 2006 Location: louisiana Age: 32 Posts: 138 Trader Rating: (0)	Whats the wait time on these seats? 2nd round group buy are all still waiting.

11-01-2009, 05:32 PM	#9
Andres_G Leaky Injector Join Date: Jul 2008 Location: Camp Pendleton Posts: 64 Trader Rating: (1)	Are these replicas? (bootlegs)

11-02-2009, 04:05 PM	#13
NINJASPY Zilvia Junkie Join Date: Oct 2007 Location: So-cal Los Angeles 626 Age: 29 Posts: 575 Trader Rating: (5)	how long is the wait from when the group buy round ends to when we expect to receive?? has round 2 really not received their seats? how long have they been waiting?

11-02-2009, 11:00 PM	#17
NA4NOW Leaky Injector Join Date: Jan 2006 Location: louisiana Age: 32 Posts: 138 Trader Rating: (0)	Just to be clear, I didnt post here to cause drama, or make accusations. I think people here should know about the status of the Round 2 group buy, before they get in on this one. I would surely want to be informed. Secondly, I WAS told over the phone that the delay was due to the logo service. And, I was told I could get a PARTIAL refund. I'll call you during the day, and we'll dicuss this. These people should know about problems with these orders, regaurdless.

11-02-2009, 11:11 PM	#18
sidedrifts13 Zilvia Addict Join Date: Jul 2006 Location: DRIFTLAND Age: 26 Posts: 969 Trader Rating: (11)	who has actual pics of these seats installed??????post them up please

11-03-2009, 02:12 PM	#20
sidedrifts13 Zilvia Addict Join Date: Jul 2006 Location: DRIFTLAND Age: 26 Posts: 969 Trader Rating: (11)	Im looking for pics for the E2'S what low bracket fit? he one you sell sit high right like shown on the pic

11-03-2009, 03:29 PM	#22
ericb382 Zilvia Member Join Date: Oct 2005 Location: Flagstaff, Az Posts: 221 Trader Rating: (4)	Could you post up the weights of the bucket seats?

11-03-2009, 05:22 PM	#24
Evan_Murphy Join Date: Sep 2009 Location: Central NJ Age: 22 Posts: 2 Trader Rating: (0)	could you post up some of the vs3 seat pics?

11-05-2009, 06:08 AM	#28
BracedEunos Join Date: Aug 2009 Location: Seattle, WA Age: 27 Posts: 10 Trader Rating: (0)	Ugg.....this wait is killing me. BTW, I was told that the CF seats are Full CF. Not a FRP seat with an outer layer of Carbon. Your OP says that each bucket seat is made with FRP. What gives?

11-05-2009, 11:30 AM	#29
carparthookup Zilvia.net Advertiser Join Date: Aug 2005 Location: Baldwin Park 626!! * AIM: Carparthookup * 626drift.com / SonicMotor.com Age: 25 Posts: 4,688 Trader Rating: (60)	And it is still true! Full carbon is still full carbon Changed the OP =P __________________ XXR wheels 521&522 Pre-order! Buddy club special Performance lighting special: 7x6 $29 HID Kits $58!! Want a bucket seat? On a budget? Click here GROUP BUY! BOSS KIT steering wheel Hubs and Quick releases starting at $19.95!

11-07-2009, 09:38 PM	#30
DriftPanda Join Date: Sep 2009 Location: New Jersey Age: 26 Posts: 16 Trader Rating: (1)	what's the widest seat you have?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/group-buys/286946-bucket-seats-budget-back-due-popular-demand-round-4-a.html
Posted By	For	Type	Date	Hits
[Wanted To Buy] Bucket Seats - RX7Club.com	This thread	Refback	01-21-2010 03:13 PM	11
MySpace.com - External Link Alert	This thread	Refback	12-30-2009 09:03 PM	3
S13 Anyone have any seat experience? - 240sxONE Forums	This thread	Refback	11-25-2009 09:19 AM	49