Skull And Bones KA Oil Adaptor Block - Introductory Group Buy - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*Om1kron* · 01-27-2009, 09:32 AM

Quote:

Originally Posted by Gorilla Unit 33

do you have a picture of this installed in the bay? im curious to see how & where you ran the lines. Im just trying to see if it will look right in my bay, since im doing a full tuck right now. Also this could be used in conjunction with the Greddy Sr oil filter relocation kit correct? i mean if we wanted to make it a little easier for doing oil changes lol, not that the filter is that hard to change.

Look for a thread calls "school me on oil coolers" you can get some nifty idea's in there.

*fromxtor* · 01-27-2009, 10:45 AM

Mano dont forget about asking to see if you guys can make some IACV block offs. :bigok

*Om1kron* · 01-27-2009, 10:52 AM

Quote:

Originally Posted by fromxtor

Mano dont forget about asking to see if you guys can make some IACV block offs. :bigok

And while you're at it I have a cnc egr block off plate as well you guys can copy haha offer a whole ka package deal. Good money for your shop! The piece I bought is real legit, nice and thick modled after the oem egr, round flanges and all.

*ManoNegra* · 01-27-2009, 11:05 AM

These sort of things are not very difficult to make
the real question is whether enough people would want
them to make it worth the time to make them
machine time is pretty expensive and we already have
a couple of other cool things we want to make next
but, like I told fromxtor, I'll run it by Mike and if time allows who knows...

*let5l1de* · 01-27-2009, 12:22 PM

Quote:

Originally Posted by ManoNegra

These sort of things are not very difficult to make
the real question is whether enough people would want
them to make it worth the time to make them
machine time is pretty expensive and we already have
a couple of other cool things we want to make next
but, like I told fromxtor, I'll run it by Mike and if time allows who knows...

PAYMENT SENT!

Put me on all your lists of new products! My turbo project will love all the attention with all the nice and shiny billet.

*ManoNegra* · 01-27-2009, 02:45 PM

Quote:

Originally Posted by let5l1de

PAYMENT SENT!

Put me on all your lists of new products! My turbo project will love all the attention with all the nice and shiny billet.

Is your name Mario?

update:
Material is here, will begin cutting and prepping today.

*let5l1de* · 01-27-2009, 03:49 PM

Quote:

Originally Posted by ManoNegra

Is your name Mario?

update:
Material is here, will begin cutting and prepping today.

tahts me. we pm'ed a few times last week.

bradystrib · 01-27-2009, 07:37 PM

i'm am interested. will send paypal monies after next pay period.

9s13Coupe3SX · 01-27-2009, 08:06 PM

Don't forget me Juan, I want the anodize one too. Just save another for me, can pick up as soon as they are done.

*ManoNegra* · 01-27-2009, 08:15 PM

Quote:

Originally Posted by bradystrib

i'm am interested. will send paypal monies after next pay period.

You're on the list already

Quote:

Originally Posted by 9s13Coupe3SX

Don't forget me Juan, I want the anodize one too. Just save another for me, can pick up as soon as they are done.

You got it.

*hunter8411* · 01-27-2009, 08:17 PM

Payment was just sent. Can't wait to get it. Thanks a lot and keep up the good work.

*ManoNegra* · 01-27-2009, 11:52 PM

Quote:

Originally Posted by hunter8411

Payment was just sent. Can't wait to get it. Thanks a lot and keep up the good work.

Got it and updated the list accordingly, thank you

Update:
- Cut about half the stock before the blade on the saw decided it had enough
- Finished final details on CAD program
- Got tooling and CNC set up sorted out
- Only had to adjust the depth of a chamfer and spindle speed for a tap operation that resulted in a broken tap
- have 5 pieces ran (and running the 6th as I type) through the first phase

casualty:

First piece with bad chamfer = set up piece

It's almost 10pm, time for me to go home and get some sleep....

SoBay240guy · 01-28-2009, 05:18 PM

No sleeps for you.

Back to work.

flip240 · 01-28-2009, 05:46 PM

Put me down on this list, when should we send payment?

*ManoNegra* · 01-28-2009, 07:09 PM

Quote:

Originally Posted by flip240

Put me down on this list, when should we send payment?

Done
You can pay whenever you like
5 persons have paid upfront
others will once the parts are ready
whichever you're comfortable with.
-juan

*Om1kron* · 01-28-2009, 07:16 PM

I'm going to send my payment in 2 weeks then... I got a second kazz diff to pay for on my other car that sits on jackstands lol

*ManoNegra* · 01-28-2009, 11:20 PM

Quote:

Originally Posted by Om1kron

I'm going to send my payment in 2 weeks then... I got a second kazz diff to pay for on my other car that sits on jackstands lol

sounds good

updated the list, thank you TJ and Philip

CNC running as I type this
we've ran about 20 pieces through phase one already
-juan

Adikt · 01-29-2009, 08:44 AM

I'm in, I'll send payment once some funds clear up in paypal

*FaLKoN240* · 01-29-2009, 12:40 PM

I thinks me wants this.

*Om1kron* · 01-29-2009, 02:51 PM

Quote:

Originally Posted by FaLKoN240

I thinks me wants this.

"You don't want nothing to do with this shit dewey"

"I think I kinda wanna"

deuceforty · 01-29-2009, 04:07 PM

got mine today.

thanks

*ManoNegra* · 01-29-2009, 05:36 PM

cool, people are getting the first few parts
let me know what you think

*ManoNegra* · 01-29-2009, 11:09 PM

Update:
All the pieces have been ran through the first CNC operation
for the bottom profile
Set up fixture for the second CNC operation is done
Tooling has been sorted
About to start running CNC phase 2

*UNISA JECS* · 01-29-2009, 11:30 PM

Let me know when there ready for sale and i'll pick one up in located in Socal Fontana.

*DreamN* · 01-29-2009, 11:35 PM

haha skullworks. that's a badass little piece. hopefully i'll be able to come up on one.

Gorilla Unit 33 · 01-30-2009, 01:20 AM

Quote:

Originally Posted by Om1kron

Look for a thread calls "school me on oil coolers" you can get some nifty idea's in there.

i couldnt find this thread, can anyone link me?

*ManoNegra* · 01-30-2009, 10:35 AM

Quote:

Originally Posted by UNISA JECS

Let me know when there ready for sale and i'll pick one up in located in Socal Fontana.

you got it

Quote:

Originally Posted by DreamN

haha skullworks. that's a badass little piece. hopefully i'll be able to come up on one.

yeah, pretty creative huh... yeah, started as a joke but
I'm afraid it may stick
I'll let you know when the new batch is ready

Quote:

Originally Posted by Gorilla Unit 33

i couldnt find this thread, can anyone link me?

here you go
school me on oil cooler setups.

fastandlow · 01-31-2009, 05:36 PM

you can put me on the list just let me know when there ready so i can send payment.

*ManoNegra* · 02-01-2009, 01:22 PM

Quote:

Originally Posted by fastandlow

you can put me on the list just let me know when there ready so i can send payment.

Done

Update
Day 4 - Second stage finished
this was by the far the worst, took about 20 mins per part

Day 5 - Fixture for 1/8 NPT ports
kinda hard to notice but the fittings threads were milled, that's right - milled threads

SoBay240guy · 02-02-2009, 11:37 AM

Juan is a slave driver.....

We both put in 40 "extra" hours this week (we already work 40-50 hour weeks) All after 6PM and on the weekend. This should have taken much longer, We are both feeling it this morning.

I can see that our work is appreciated, Thanks to everyone who shared kind words (and all the pre-payers) <---they kept us full of Monsters and paid for materials and tooling.

We will finish de-burring today and send to anodize today or tomorrow. and i'll slip the guy an extra $20 so he hurrys them through.

01-27-2009, 10:45 AM	#32
fromxtor BBB Join Date: Aug 2005 Location: NC Age: 29 Posts: 2,950 Trader Rating: (21)	Mano dont forget about asking to see if you guys can make some IACV block offs. :bigok __________________ Seller feedback>>http://www.zilvia.net/f/showthread.p...light=fromxtor

01-27-2009, 11:05 AM	#34
ManoNegra Premium Member Join Date: Jan 2004 Location: SoCali Posts: 4,712 Trader Rating: (27)	These sort of things are not very difficult to make the real question is whether enough people would want them to make it worth the time to make them machine time is pretty expensive and we already have a couple of other cool things we want to make next but, like I told fromxtor, I'll run it by Mike and if time allows who knows... __________________ S-Chassis/Z32 Rear Upright Spherical Bearing Group Buy

01-28-2009, 07:16 PM	#46
Om1kron Violent Running Asshole Join Date: Sep 2004 Location: fontana, ca Age: 29 Posts: 3,364 Trader Rating: (9) Rides Gallery: Om1kron	I'm going to send my payment in 2 weeks then... I got a second kazz diff to pay for on my other car that sits on jackstands lol __________________ Wayne T. Edwards Violent Running Tribe News Blog <---Peep This

01-29-2009, 08:44 AM	#48
Adikt Zilvia Member Join Date: Dec 2003 Location: Chicago Age: 22 Posts: 259 Trader Rating: (0)	I'm in, I'll send payment once some funds clear up in paypal __________________ "yo wheels are so sunk im gonna need an extension" "havin 1000 horses is like tryin to catch dinner with a rocket launcher"

01-29-2009, 04:07 PM	#51
deuceforty Zilvia Junkie Join Date: Apr 2008 Location: raleigh Age: 22 Posts: 570 Trader Rating: (9)	got mine today. thanks __________________

01-27-2009, 07:37 PM	#38
bradystrib Leaky Injector Join Date: Jan 2007 Location: smyrna ga Age: 24 Posts: 125 Trader Rating: (1)	i'm am interested. will send paypal monies after next pay period.

01-27-2009, 08:06 PM	#39
9s13Coupe3SX Zilvia Junkie Join Date: Oct 2008 Location: Somewhere Ca Posts: 527 Trader Rating: (32)	Don't forget me Juan, I want the anodize one too. Just save another for me, can pick up as soon as they are done.

01-27-2009, 08:17 PM	#41
hunter8411 Premium Member Join Date: Sep 2005 Location: SoCal Age: 25 Posts: 598 Trader Rating: (15)	Payment was just sent. Can't wait to get it. Thanks a lot and keep up the good work.

01-28-2009, 05:18 PM	#43
SoBay240guy Join Date: Aug 2006 Location: So. Cal. Age: 24 Posts: 19 Trader Rating: (0)	No sleeps for you. Back to work.

01-28-2009, 05:46 PM	#44
flip240 Join Date: Jan 2003 Location: Chicago Posts: 26 Trader Rating: (1)	Put me down on this list, when should we send payment?

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

01-29-2009, 05:36 PM	#52
ManoNegra Premium Member Join Date: Jan 2004 Location: SoCali Posts: 4,712 Trader Rating: (27)	cool, people are getting the first few parts let me know what you think __________________ S-Chassis/Z32 Rear Upright Spherical Bearing Group Buy

01-29-2009, 11:09 PM	#53
ManoNegra Premium Member Join Date: Jan 2004 Location: SoCali Posts: 4,712 Trader Rating: (27)	Update: All the pieces have been ran through the first CNC operation for the bottom profile Set up fixture for the second CNC operation is done Tooling has been sorted About to start running CNC phase 2 __________________ S-Chassis/Z32 Rear Upright Spherical Bearing Group Buy

01-29-2009, 11:30 PM	#54
UNISA JECS Premium Member Join Date: Feb 2007 Location: Socal Fontana Age: 30 Posts: 2,089 Trader Rating: (24)	Let me know when there ready for sale and i'll pick one up in located in Socal Fontana. __________________ PARTS 4 SALE !! Z32 E-Brake/Parking Brake Heatshield Assemblys!!! *Rep/Feedbacks*

01-29-2009, 11:35 PM	#55
DreamN Premium Member Join Date: Nov 2006 Location: SoCal (818) Mon★ Rep Power: ∞ Age: 24 Posts: 8,013 Trader Rating: (29) Rides Gallery: DreamN	haha skullworks. that's a badass little piece. hopefully i'll be able to come up on one. __________________

01-31-2009, 05:36 PM	#58
fastandlow Leaky Injector Join Date: Jun 2007 Location: bridgeport ct/colorado springs Age: 25 Posts: 53 Trader Rating: (3)	you can put me on the list just let me know when there ready so i can send payment.

02-02-2009, 11:37 AM	#60
SoBay240guy Join Date: Aug 2006 Location: So. Cal. Age: 24 Posts: 19 Trader Rating: (0)	Juan is a slave driver..... We both put in 40 "extra" hours this week (we already work 40-50 hour weeks) All after 6PM and on the weekend. This should have taken much longer, We are both feeling it this morning. I can see that our work is appreciated, Thanks to everyone who shared kind words (and all the pre-payers) <---they kept us full of Monsters and paid for materials and tooling. We will finish de-burring today and send to anodize today or tomorrow. and i'll slip the guy an extra $20 so he hurrys them through.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/group-buys/236376-skull-bones-ka-oil-adaptor-block-introductory-group-buy.html
Posted By	For	Type	Date	Hits
240SX.net • View topic - Grantspec's supercharged KA coupe build	This thread	Refback	11-16-2009 08:44 PM	1
how long does the oil light take to turn off? - Page 2 - Nissan Road Racing Forums	This thread	Refback	10-07-2009 08:04 PM	3
I need guidance. - Houston240sx.com Forums	This thread	Refback	09-17-2009 09:00 PM	12
240-kid's random link thread - Page 19 - 240SX Forums	This thread	Refback	09-08-2009 06:44 PM	3
240SX.net • View topic - Grantspec's supercharged KA coupe build	This thread	Refback	08-17-2009 04:04 PM	1
240SX.net • View topic - Grantspec's supercharged KA coupe build	This thread	Refback	08-16-2009 01:35 AM	2
sandwich - 240sxONE Forums	This thread	Refback	07-24-2009 05:19 PM	4
unbelievable.. - Page 2 - Houston240sx.com Forums	This thread	Refback	04-26-2009 03:34 AM	2
510 Boso Wagon - Supercharged KA24DE - Page 3 - Ratsun Forum	This thread	Refback	04-15-2009 08:39 PM	10
1972 Datsun 510 Wagon - KA24DE - Page 3 - Ratsun Forum	This thread	Refback	04-15-2009 12:47 AM	1
Oil feed. - Page 2 - UtahNissans.com ::	This thread	Refback	04-05-2009 11:08 PM	1
www.ka-t.org :: View topic - from 3500 bone stock S14 to full drift car	This thread	Refback	02-18-2009 11:36 AM	4
www.floridadrift.com • View topic - turbo set up	This thread	Refback	02-10-2009 12:11 AM	1
Bow's KA24DE Build - Page 2 - Texas Nissans	This thread	Refback	02-07-2009 03:20 AM	2
nis720 stage II - Page 7 - Infamous Nissan	This thread	Refback	01-31-2009 10:09 PM	9
For those KA-Ters out there! - Houston240sx.com Forums	This thread	Refback	01-28-2009 04:42 PM	1