tnd240

To all Zilvia Members, we are here to welcome all of you back to IMPORT SPECIALISTS.

Having taken some time on hiatus I am here to proudly remit my reutrn to the community.... Over the course of the next 14 days, IMPORT SPECISALISTS will be establishing its resources to provide all like-minded Zilvia Members the most sought after parts and accessories from Japan. All engines are in stock and ready for your delivery as e\per your request.

We are here to provide each of our customers with the assurance that your needs and concerns are not taken lightly. Many times before us have there been fly-by-night Importers with empty promises and shady business practices. The difference here being we are enthusisasts first and have been for many years all in our own right.

We take great pride and due diligence to insure each engine is accounted for and tested prior to shipment HERE in North America; we understand your concerns with investing in an engine you have not had the oppurtunity to pick out for yourself and as such we take it upon ourself to insure OUR highest standards supersedes even your own.

This is what makes us who we are and for this, we take great pride in offering Zilvia members our products and our word.

For a limited time offer, IMPORT SPECIALISTS is offering OEM SideMount Intercooler with Complete Piping including Hotpipe, Coldpipe and Recirculating valve with our Complete SR20DET Motorsets for $75.00, allowing the budget- minded enthusiast the oppurtnity to run a full turn key swap in out of your driveway.
**Compression Test results WITH PICS and VIDEO available upon request with pleasure.**All Complete motorsets IN STOCK with online tracking.

All Nissan Motorsets come COMPLETE with

Motor / FULL Uncut Wiring Harness / Ignitor chip / Turbo / CAS (Cam-Angle Sensor) / Tranny / ECU / All Accessories

COMPLETE Engines IN STOCK
Complete SR20DET S13 Redtop $1950.00 USD Plus shipping
Complete SR20DET S13 Blacktop $2150.00.00 USD Plus shipping
Complete SR20DET S14 $2450.00 USD Plus shipping
Complete RB20DET $1350.00 USD Plus shipping
Complete RB25DET $2450.00 USD Plus shipping


Please feel free to contact me with any questions or concerns, it is with great pleasure to offer you our undivided attention and services; no question is too small.

Brian W.

JD is a good guy. We got an RB26 from him sometime back. Top Notch service!!!!

__________________
www.ma-motorsports.com
Authorized APEXi Power Excel Tune Shop
YASHIO FACTORY, APEXI, EXEDY BRIAN CROWER, MA-MOTORSPORTS HARD PARTS, and MORE....
http://www.apexi-usa.com/img/logo_powerexcel.gif
MA-Motorsports Review thread: http://www.zilvia.net/f/showthread.php?t=129741

ootranceformeroo

Hey Im wondering why your website has cheaper prices than you're offering us? Just curious.

__________________
Gorgeous Garage
Touge Friends
CrabDrifting.com
Drift Unit

MsSilvia

How much for a s13 blacktop just engine????? Don't hurt me.....

tnd240

ootranceformeroo : Prices will be changed shortly to their appropriate settings.

MsSilvia: Complete S13 SR20DET Blacktop will be $2400.00 Plus shipping;
(Shipping usually being about $250.00 in the greater Central/NorthEast)

Always with Tracking and Same-Day Shipping available. For an excact quote, just send me the destination Zip Code and whether it will be sent to a business or residential area.

Pics with Compression Numbers available upon request.

Thank you
Jd
AIM: TND240S13
MSN: TND240@hotmail.com

Sr-Silvia

I live about 45 min from JD's shop (Northern vermont) and have been dealing with him for about 2 years now. Products are always top notch, and prices are good as well. I Plan on buying rb25 from him withen the next few weeks!
Joe

PSI240SX

I have dealt with JD for years and bought a ton of motors from him, great guy always willing to go the extra mile, and will help you find anything you may need. A+ and buy from this guy!

__________________
Image Exceeds Maximum Limits set by User Agreement.
Deleted by Moderator.

www.mazworks.com For all your custom fab 240sx needs!!!!

qt_240

ohh bump for this.. great guy.. great deals... great period.. if your looking for an engine swap so0n guys.. do it right .. do it with JD .. bump for you brother..

sean350z

another free bump...on another note...do you happen to have the stock bov bracket from an S14??

__________________

umsports

Well dang....So much for keeping you a secret..lol

I have also known John David for several years now, and he is amazing....The quality of motors dont come any better, and he's an outstanding guy...

I would have no reservations about buying from him, he has always delivered exactly what he promises...

I have been suprised by the number of other business owners I have run into who buy from him also...

I guess the cat is out the bag, and I wish you the best of luck with your new venture on Zilvia..

__________________
1998 RB26DETT 240SX 810whp@28lbs
1995 KA-T 530rwhp/455wtq @ 25lbs

tnd240

I will be posting status on each SR20DET, RB20DET and RB25DET I have in stock along with all pertinent info as well as compresion numbers for each posted IN STOCK Complete NISSAN Motorset.

All options and supported parts available for our S13 and S14 Chassis' will be posted as well including

SMIC and All Piping
3 Inch Exhausts (S13 and S14)
S13 Gauge Clusters
Complete Silvia Front End Conversions.

Again, thank you to everyone for their continued support, I feel honoured to be given the oppurtunity to play a role in the build-up of so many fellow Nissan enthusiasts.

If anyone has any questions or concerns, please do not hesitate to contact me; no question is too small.

Thank you
Jd
AIM: TND240S13
MSN: TND240@hotmail.com

tnd240

Hi Sean, unfortunately we only have Complete SMIC/Piping avalable at this time. I may have a HKS SSQV with SR20DET SMIC Mounting flange available for an easy bolt-in install. I will check for you wehen I head backin to the office tommorrow moring (03/13/06)

Thank you
Jd
AIM: TND240S13
MSN:TND240@hotmail.com

sr20newb

I was curious if your shop sells just blocks or complete engines...im looking to get a sr20 engine complete with head. i need to replace my current block, thank you and i look forward to hearing from you.

joewantstodrift

hey do you guys sell front clips also or just motorsets? im looking to buy an rb25det front clip. let me know what you can do. you can pm or email me too. email is joewantstodrift@yahoo.com thanks.

tnd240

Replacement Long Blocks are available as well. With each Long Block, I will mate a transmission and starter to it to decipher the health of the engine; if a transmission is not already mated to it. Compression numbers and pics are available upon request with each long block.

(All Healthy Long Blocks pre-approved with Compression Test Results)

SR20DET Redtop Long Block $1000 Plus shipping
No Accessories
No manifolds
No Turbo
No Injectors
No CAS
No TPS




Thank you
Jd
AIM: TND240S13
MSN: TND240@hotmail.com

tnd240

I could make this into an FAQ Statement:

Pre-approved Front Clips are available upon Request. We are very diligent about the quality and completeness of our motorsets so that Front Clips are generally not needed.

Front Clips tend to take up more room than neccessary in our containers, many a time we pull our motorsets from the cars ourselves in Japan to do just that; keep the completness and integrety of our motorsets to our highest standards.

It is also the reason our Front End conversion are as complete as they are.

That being said, Front Clips are still brought in quite readily when we do have the place for them to be safely and securely anchored down.

Special requests are more than welcome. Pics and status of what we choose for you in Japan are taken prior to requesting a 50% deposit to insure it's place on the next shippment safely and securely as requested by all of our customers.

R32 and R33 Front Clips are available upon special order and I will be posting ETA and a run-down of what is to come en route from Japan.

As always, if you have any questions or concerns, please do not hesitate to ask, no question is too small.

Thank you
Jd
AIM: TND240S13
MSN: TND240@hotmail.com

sr20newb

Wow! great prices!! Email sent!!! Im going to refer everyone to you guys from now on .

aa87

S13 redtop price shipped to 71115, Also, what s13 exhausts do you currently have? Would it add to shipping? Also, would there be a difference shipped to a residential adress and business, business one having a forklift and loading dock, if so whats the prices. Thanks.

tnd240

Shipping to 71115 is $322.00 USD (no hidden fees, charges or taxes)

I will be posting ALL Parts available for S13/4 Chassis tommorrow morning
(03/15/06)

No, it wouldn't add to shipping, consider it free shipping.

Residential delivery with Lift-Gate is available on all Motorsets for $100.00; for the added convenience to have your order rolled strait onto your driveway and into your garage it's worth even double that.

As always, if you have any questions or concerns, please do not hesitate to contact me.

Thank you
Jd
AIM: TND240S13
MSN:TND240@hotmail.com

joewantstodrift

how does an rb25det front clip differ in price from an rb25det motorset? what is the difference in shipping also? my zip code is 61821 if that helps any. i would not necessarily mind buying a motor set but im worried about completeness and having to search around alot to find little odds and ends to complete my swap.

tnd240

Hi Joe, shipping difference is approximately $200.00.

Shipping for a complete RB25DET Motorset shipped to a business is $300.00 3 Day with Tracking via R&L Carriers.

Motorsets come complete with the following;

Motor
Complete UNCUT Harness
CAS
Ignitor Chip
Tranny
ALL Accessories
Both manifolds
Turbo
RB25DET Cross-Member
etc etc.

Pics and compression numbers included as well as a run-down checklist of confirmed parts included with each order.

In my honest opinion, it is not worth the added purchase price, shipping costs and inevitable removal of an extra engine for the very few parts you may still need that would unltimately still be required with the acquisition of a front clip. Considering the motorsets come as complete as they do, with the assurance that everything is as promised with a checklist, save yourself the headache.

However for peace of mind it is with absolute pleasure to place your order for a front clip from Japan with my partners.

Thank you
Jd
AIM: TND240S13
MSN: TND240@hotmail.com

whooha1217

how much for shipping to 07733 of sr20det redtop longblock??
No Accessories
No manifolds
No Turbo
No Injectors
No CAS
No TPS

tnd240

Shipping to 07733 Business address is $200.00 1-Day Ground with Tracking via R&L Carriers.

Thanks
Jd
AIM: TND240S13
MSN: TND240@hotmail.com

mothon

hey how much for s14 smic and all the piping?

tnd240

Hi Mothon,

SMIC and Piping is available as an option for orders of complete motorsets for
an easier cost-efficient bolt-in installation.

Thank you
Jd
AIM: TND240S13
MSN:TND240@hotmail.com

zeek

How much for a s14 sr kouki ecu?

DoriftoPnoy

Just curious. But how much would a S14 SR20DET long block go for? Just the block, no accessories, no manis, no cas, no tps, just the straight block.

__________________

tnd240

$2100.00 Plus shipping.

Thank you
Jd
AIM: TND240S13
MSN: TND240@hotmail.com

m0rex

How much for a s14 front clip?

__________________

s13srmadness

hi, i would like a quote for a complete rb25 CLIP (i need all that stuff) shipped to 07005 residential and a quote for the same thing shipped to 07054 business. (not too sure theyll allow me to recieve it at work.)
please email me at s13srmadness@hotmail.com
thanks,
-steve

__________________
zenki s14