Quest Alternator Conversion to SR20 - Finally a bolt on kit! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*codyace* · 01-12-2012, 09:51 PM

Quest Alternator Conversion to SR20 - Finally a bolt on kit!

This has long been a sticking point for SR20 guys....nothing worked, and anything/everything required welding and modification for it to work - the wait is over! I got frustrated with no one making this kit so I took it into my own hands instead.

My kit utilizes the factory bracket setup, and resides in the exact same place as the OEM alternator. Wiring is exactly the same, and the only modification required is re-drilling the lowest holes out to a 3/8” size, to accept the factory SR20 bolts. Aside from that small modification, the rest of the process is direct replacement, 30 minutes maximum time, using only hand tools.

All hardware is stainless or corrosion free as well. No ganky stuff here!

The kit is also offered with and with a belt; as it sits, the kit utilizes the OEM belt, so if your current belt is in good shape, or if you have aftermarket pullies, you will not need to purchase the kit with a belt. If you do need a belt however, I can provide one at cost.
Pricing:

Price without belt: 55 dollars shipped/paypalled
Price with belt: 69 shipped/paypalled

Alternator wise, my kit accepts either the 110 or the 125 amp kit from any 1996 to 2001 Nissan Quest (or Mercury Villager). These can be found for as low as 50 to 60 shipped on Ebay, to 110-150 dollars re-manned at part stores or on ebay. 110 amp units were used up to 1999, with late 99 to 01 being 125 amp.

EMAIL Me for best response, (codyace AT gmail DOT com) or PM ME FOR PAYMENT INFORMATION (codyace AT gmail DOT com)

Thank you, and I hope to help you all out soon!

Boost_Fiend · 01-12-2012, 10:00 PM

This is amazing. Great ingenuity. Does the sr belt work with the quest pulley? and how long will you be selling these?

EDIT: Never mind just reread your post.

*codyace* · 01-12-2012, 10:06 PM

Thanks Boost Fiend! As in the post, my kits will work with the stock belt, or I include a new one if you want a new one.

Atop of that, these kits can utilize aftermarket SR pullies as well!

negrosx13 · 01-12-2012, 11:01 PM

Can I keep my greddy pulley with the new setup?

MrJdmEh2 · 01-12-2012, 11:10 PM

I have this and his ac kit both top notch quality. Negrosx it works fine with my greddy pulley.

*KiLLeR2001* · 01-13-2012, 06:55 AM

Hey cody, when upgrading to this alternator, would I need to switch out my 75amp fuse with a 110/125amp fuse?

BTplaya · 01-13-2012, 07:14 AM

Quote:

Originally Posted by KiLLeR2001

Hey cody, when upgrading to this alternator, would I need to switch out my 75amp fuse with a 110/125amp fuse?

Also intrested in this.

blkkouki · 01-13-2012, 10:12 AM

Are there any chances of making this kit for the RB series motors?

snafupossum · 01-13-2012, 11:51 AM

Awesome dude and awesome parts. Currently running his a/c bracket on my sr! May pic up one of these also!

memphis180sx · 01-13-2012, 12:03 PM

whats his price on the ac bracket

joeboo1 · 01-13-2012, 02:17 PM

Looks good....great job

*codyace* · 01-13-2012, 04:12 PM

Quote:

Originally Posted by negrosx13

Can I keep my greddy pulley with the new setup?

Yes you can. If you are going to use the pulley, you'll want to order the kit without a belt, and then reuse your current one with the kit.

Quote:

Originally Posted by MrJdmEh2

I have this and his ac kit both top notch quality. Negrosx it works fine with my greddy pulley.

Thanks for the good words brother!

Quote:

Originally Posted by KiLLeR2001

Hey cody, when upgrading to this alternator, would I need to switch out my 75amp fuse with a 110/125amp fuse?

You do not need to change that, as that's on the backfed side of the system.

Quote:

Originally Posted by blkkouki

Are there any chances of making this kit for the RB series motors?

I kick myself for loosing the contact information, but I did have one member who adapted it to his RB and I for the LIFE of me can't remember how he did it, or what he did (I accidentally cleared my PM box without saving them). I could probably sort something out, but without having an RB car around it would be hard for me to test it.

Quote:

Originally Posted by memphis180sx

whats his price on the ac bracket

My website is here: CodyAce SR20 Air Conditioning Bracket
and my group buy is here: http://zilvia.net/f/group-buys/42948...etup-sr20.html

I've got all pricing and pics on there so check em out

Quote:

Originally Posted by joeboo1

Looks good....great job

Thanks! PM me if you have any other questions.

Vayber · 01-14-2012, 05:12 PM

Bought the ac bracket system off of Codyace and it was amazing really simple to install and fits like a charm. LEGIT!!

*MrChow* · 02-06-2012, 04:14 AM

God I need ones of theses.. but i need a new battery first.. D=

KTMrida4life · 03-08-2012, 08:10 PM

Is this the same kit for the KA24DE?

I went through some of your threads and couldnt find it. If the KA kit is different, how much are you asking for that kit?

Super Ertoy · 03-20-2012, 06:03 AM

Quote:

Originally Posted by KTMrida4life

Is this the same kit for the KA24DE?

I went through some of your threads and couldnt find it. If the KA kit is different, how much are you asking for that kit?

I'm looking for this as well. I found some post with install pics of your kit for KA. please pm me if you have one for KA24DE

99-01 Quest Alternator upgrade - Runs smoother :]

riptor · 05-10-2012, 10:21 PM

hey cody, can you post an updated pic of the kit so people can see what they are workin with?

01-12-2012, 09:51 PM	#1
codyace SR20 Air Conditioning Man! Join Date: Dec 2004 Location: Poconos, PA Age: 27 Posts: 5,980 Trader Rating: (38) Feedback Score: 38 reviews	Quest Alternator Conversion to SR20 - Finally a bolt on kit! Quest Alternator Conversion to SR20 - Finally a bolt on kit! This has long been a sticking point for SR20 guys....nothing worked, and anything/everything required welding and modification for it to work - the wait is over! I got frustrated with no one making this kit so I took it into my own hands instead. My kit utilizes the factory bracket setup, and resides in the exact same place as the OEM alternator. Wiring is exactly the same, and the only modification required is re-drilling the lowest holes out to a 3/8” size, to accept the factory SR20 bolts. Aside from that small modification, the rest of the process is direct replacement, 30 minutes maximum time, using only hand tools. All hardware is stainless or corrosion free as well. No ganky stuff here! The kit is also offered with and with a belt; as it sits, the kit utilizes the OEM belt, so if your current belt is in good shape, or if you have aftermarket pullies, you will not need to purchase the kit with a belt. If you do need a belt however, I can provide one at cost. Pricing: Price without belt: 55 dollars shipped/paypalled Price with belt: 69 shipped/paypalled Alternator wise, my kit accepts either the 110 or the 125 amp kit from any 1996 to 2001 Nissan Quest (or Mercury Villager). These can be found for as low as 50 to 60 shipped on Ebay, to 110-150 dollars re-manned at part stores or on ebay. 110 amp units were used up to 1999, with late 99 to 01 being 125 amp. EMAIL Me for best response, (codyace AT gmail DOT com) or PM ME FOR PAYMENT INFORMATION (codyace AT gmail DOT com) Thank you, and I hope to help you all out soon! __________________ *Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information! Quest Alternator Conversions for SR20!* Check my Group Buy! Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

01-12-2012, 10:06 PM	#3
codyace SR20 Air Conditioning Man! Join Date: Dec 2004 Location: Poconos, PA Age: 27 Posts: 5,980 Trader Rating: (38) Feedback Score: 38 reviews	Thanks Boost Fiend! As in the post, my kits will work with the stock belt, or I include a new one if you want a new one. Atop of that, these kits can utilize aftermarket SR pullies as well! __________________ *Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information! Quest Alternator Conversions for SR20!* Check my Group Buy! Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

01-12-2012, 11:01 PM	#4
negrosx13 Zilvia Addict Join Date: Feb 2009 Location: Houston,tx Posts: 919 Trader Rating: (13) Feedback Score: 13 reviews	Can I keep my greddy pulley with the new setup? __________________ MORE BACON STRIPS

01-13-2012, 06:55 AM	#6
KiLLeR2001 Premium Member Join Date: Jun 2007 Location: Orlando, FL Posts: 3,295 Trader Rating: (17) Feedback Score: 17 reviews	Hey cody, when upgrading to this alternator, would I need to switch out my 75amp fuse with a 110/125amp fuse? __________________

01-13-2012, 12:03 PM	#10
memphis180sx Zilvia Member Join Date: Jul 2009 Location: where you wish u were Posts: 296 Trader Rating: (1) Feedback Score: 1 reviews	whats his price on the ac bracket __________________ dont make stupid threads

01-12-2012, 10:00 PM	#2
Boost_Fiend Zilvia Member Join Date: Jan 2009 Location: Ft. Lauderdale, FL Posts: 164 Trader Rating: (0) Feedback Score: 0 reviews	This is amazing. Great ingenuity. Does the sr belt work with the quest pulley? and how long will you be selling these? EDIT: Never mind just reread your post.

01-12-2012, 11:10 PM	#5
MrJdmEh2 Join Date: Nov 2010 Location: brooklyn Posts: 21 Trader Rating: (2) Feedback Score: 2 reviews	I have this and his ac kit both top notch quality. Negrosx it works fine with my greddy pulley.

01-13-2012, 10:12 AM	#8
blkkouki Leaky Injector Join Date: Sep 2009 Location: Ft Polk, LA Posts: 138 Trader Rating: (0) Feedback Score: 0 reviews	Are there any chances of making this kit for the RB series motors?

01-13-2012, 11:51 AM	#9
snafupossum Leaky Injector Join Date: Nov 2008 Location: houston, tx Age: 22 Posts: 119 Trader Rating: (1) Feedback Score: 1 reviews	Awesome dude and awesome parts. Currently running his a/c bracket on my sr! May pic up one of these also!

01-13-2012, 02:17 PM	#11
joeboo1 Join Date: Oct 2008 Location: sanfernando valley ca. Age: 32 Posts: 15 Trader Rating: (1) Feedback Score: 1 reviews	Looks good....great job

01-14-2012, 05:12 PM	#13
Vayber Join Date: Dec 2007 Location: Chino Hills, CA Age: 24 Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Bought the ac bracket system off of Codyace and it was amazing really simple to install and fits like a charm. LEGIT!! __________________ -OoBeR NoOb

03-08-2012, 08:10 PM	#15
KTMrida4life Join Date: Feb 2012 Location: Durham NC Age: 18 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Is this the same kit for the KA24DE? I went through some of your threads and couldnt find it. If the KA kit is different, how much are you asking for that kit?

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

05-10-2012, 10:21 PM	#17
riptor Leaky Injector Join Date: Oct 2006 Location: cali Age: 28 Posts: 121 Trader Rating: (2) Feedback Score: 2 reviews	hey cody, can you post an updated pic of the kit so people can see what they are workin with?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/engine/429483-quest-alternator-conversion-sr20-finally-bolt-kit.html
Posted By	For	Type	Date	Hits
Zilvia.net Forums \| Nissan 240SX (Silvia) and Z (Fairlady) Car Forum	This thread	Refback	01-12-2012 11:47 PM	1