Sr20det FAQ - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

autobahNESSA · 03-14-2005, 11:36 PM

Can someone tell me what are the oil presure readings- used the search tool, got for sale threads mainly.

Idle sometimes I see 15psi, sometiems 20
mid throttle: 45-60psi
full throttle: 80-100psi.

during warmup the guage reads 45-60psi.

by the way Im useing a Megan Racing guage, it was cheap, so yea are these accurate?

*blu808* · 03-15-2005, 04:05 PM

fyi all motors ahould have higher oil press when cold.

A good rule of thumb is 10 Psi oil pressure for every thousand rpm.

If you have at least this then your good.

SequenceGarage · 03-28-2005, 05:45 PM

Just posting some things I did not see in this thread, however it may be in the links. Plz delete if overlapping.

SR = Block
20 = 2.0L Displacement
D = DOHC
E = Fuel Injected
T = Single Turbocharger

2.0L DOHC Turbo
Turbo Type: T25G
Compressor A/R: 0.80
Injector Size: 370cc
Bore x Stroke: 86.0mm x 86.0mm
Displacement: 1998cc
Performance: SR20DET:
Power (ps): 205@ 6000 rpm
Torque (kgm): 28.0@ 4000 rpm
Compression Ratio: 8.5:1
Speed Limiter:180 Kmh -112 mph
Stock Boost: 7 psi
ECU: 62 (redtop) OR E5 (blacktop). 63 (automatic) will also work.
MAFS: 89-90 240sx mafs works.
Rev Limit: 7500rpm (no need to really go over 7200)

Gear Ratios:

Gear Ratios - Manual Transmission
1st 3.321
2nd 1.902
3rd 1.308
4th 1.000
5th 0.759
Reverse 3.382
Final 4.083

S13 ECU Pinout (thanks to CM510.com)

Zenki S14 SR ECU Pinout (thanks to 200sx.org)

Classic battery area wiring diagram from heavy throttle:

*Jeff240sx* · 04-07-2005, 03:16 PM

The power specs, and turbo that Sequence Garage listed are for s13 sr20det only. S14 is 220hp (I think) with a t28 turbo. The s15 is 250hp (again, I think) and uses yet another turbo.
-Jeff

BLT123 · 04-10-2005, 01:27 AM

S15 same turbo with cast divider wall, bigger injectors, and I think thicker beams but not sure. Both S14 and S15 blacktops have VVL.

240Driver39 · 04-11-2005, 04:33 PM

Quote:

Originally Posted by BLT123

S15 same turbo with cast divider wall, bigger injectors, and I think thicker beams but not sure. Both S14 and S15 blacktops have VTC.

there..fixed it for ya...would really be a fun motor if they have vvl...but sadly they dont..so dont spread incorrect info.

closebyu26 · 04-16-2005, 02:49 AM

At the bottom of this tread they talk about bhoost for stock sr20det turbo. I have found from personnal experiance that the turbo will at least put out 1.3mb, or 18 psi, but I have stock everything, so detination was the final outcome, but it would put out more if you had bigger inj, front mount IC. I'm running it at 14 psi right now with no problems. Thats with a greddy boost controller.

gerryb · 04-20-2005, 06:32 AM

Z32 NA and TT AFM look the same but are different. The difference is that the NA AFM will read up to 350hp or so, the TT one will read up to 500hp. You want the TT AFM.

mjjstang · 04-20-2005, 06:37 AM

your dumb as shit and your post should be removed at once, and when yours is, then mine should follow

btw I see you dont post much as youve been here quite a bit longer than your post count would show, I hope this doesnt discourage you from future posting, but I would hope you think next time before pushing bullshit into the mix.

gerryb · 04-20-2005, 09:16 AM

Hey f$%K you you yanky piece of crap, when you turkey's were still running around in ka truck engine pieces of crap we'd been doing sr conversions etc here for years, (and had complete import s13 sr's here). There are 2 part numbers for Z32 AFM 1 for NA and 1 for TT. They have been tested for voltage to airflow capacity and that's the fact jack, so unless you have been involved intuning them and have the facts shut your stupid dumb shit mouth.

SpeedRacerGTP · 04-26-2005, 12:46 AM

What's with the hate? It takes maturity to engage in intelligent discourse without namecalling. If someone says something you disagree with, make it known WITHOUT taking personal jabs. Didn't either of you two go to Kindergarten? Sheesh.

http://www.courtesyparts.com/Merchan...e=22680-Z32ALL
Apparently the Z32 MAFs have the same part number and are therefore the same for both the TT and the N/A (at least for the USDM, although I highly doubt it would be different elsewhere). So calm down you two!

mike_fernandes · 04-30-2005, 12:41 PM

wow.. i think this is my first post ever.

This info is for the S14 blacktop motor, it's taken right out of the service manual. hope this helps some of you.

Engine Oil: (with filter change): 3 1/4 qt (3.7 L)
(w/o filter change): 3 1/8 qt (3.5 L)

Cooling System (including resevoir): 5 1/2 qt (6.2 L)

Manual Transmission: *GL-4* 4 1/4 pt (2.4 L)
Differential carrier gear oil: *GL-5* 3 1/8 pt (1.8 L)

Automatic Transmission: 7 qt (7.9 L)

Power steering 3/4 qt (0.9 L)

edit: if anyone doesnt believe this I can back it up with a pic of the page from the manual, but as you can tell I'm new and don't know how to upload pics yet... unless theres someone that can host them for me.

the head · 05-23-2005, 03:29 PM

short block has no Head only pistons crank ect

Carlwill · 05-23-2005, 04:47 PM

Quote:

Originally Posted by 420sx

spark plug seal is same is fwd SR from sentra.

ka and sr tranny are NOT interchangable. the rear housings are same. its basically same tranny, u just cant bolt it up.

I just found out the hard way that there is a difference between FWD and RWD seals for the SR. RWD are larger.

sepulchral · 06-03-2005, 09:44 PM

sr20det spark plugs are code BKR7E-11

by NGK

s13gonwild · 06-18-2005, 07:02 AM

heres a few had to search for the clutch and main seal that any us cars have...

-Front and rear main seal = 93 sentra SER
-Stock sr clutch = 89 Nissan Maxima
-Timing chain replacement = 89 Nissan Maxima
-o2 sensor = 87 300zx turbo
-Turbo gaskets = 90-96 tt 300zx
-Exhaust/intake manifold gaskets = 93 Sentra SER

Also found out you could use a ka radiator on sr but you need a top radiator hose that would travel from the pass side to the driverside and you will need to cut the ends a bit..

you can get the hoses from the following

-02 Dodge neon L4 2.0L
-96 Buick road master limited V8 8.7L
-96 chevrolet caprice classic V8 4.3L/5.7L

Taffy · 06-24-2005, 11:40 PM

Quote:

Originally Posted by Jeff240sx

The power specs, and turbo that Sequence Garage listed are for s13 sr20det only. S14 is 220hp (I think) with a t28 turbo. The s15 is 250hp (again, I think) and uses yet another turbo.
-Jeff

The Japanese S14 and S15 turbo are basically the same. Both the compressor and exhaust housings are the same. The compressor and exhaust wheels are the same specs. The difference is that the S14 exhaust wheel is not made of the same material as the S15 exhaust wheel. I can not remember the materials, but they are NOT ceramic, they are steel alloys.

The S14 turbo in Australia is not ball bearing from what I have been told. The S15 in Australia is ball bearing though.

Taffy · 06-24-2005, 11:42 PM

Quote:

Originally Posted by 420sx

spark plug seal is same is fwd SR from sentra.

ka and sr tranny are NOT interchangable. the rear housings are same. its basically same tranny, u just cant bolt it up.

The spark plug seals are not the same. The S13 and S14/15 RWD SR20DET spark plug seals are JDM only.

The SR and KA bell bousing have different engine side bolt patterns.

*Jeff240sx* · 06-30-2005, 02:54 AM

DO NOT POST IN THIS THREAD UNLESS YOU HAVE AN ANSWER TO A FAQ!

I just pruned ~40 posts from this thread, too. I'm sick of fucking babysitting these FAQs, and WILL lock them if a simple rule like "Stop asking stupid questions" can't be followed.
You have a question without an answer? Step 1. Search. Step 2. Post in the Tech section, NOT THE FUCKING ANSWER THREAD!
-Jeff

TKOs14 · 07-16-2005, 02:54 PM

sr20det s13 in s14 coolent capacity:
"with koyo s14 radiator"

1 3/4 gallons

thats all i got...

hellion240sx · 07-18-2005, 08:32 PM

did a search and found nothing

sr20det oil pan holds 3.5 quarts of oil but you can put in four.

>>don't know if thats a good or bad thing but i remember it being discussed.<<

s14 blacktop · 07-26-2005, 10:52 AM

do not put anymore than 3.5 quarts of oil in your sr.. the rest will be spit out by your engine through your breather valve, unless you like your intercooler and intake to have a thick oil film on the inside.

yes it will hurt your engine.

brrr · 08-09-2005, 11:00 AM

Hey, I am doing an s14 sr into s14 96 240sx and I have the complete wring harness and the jdm ecu. There are four plugs on the inside-of-the-firewall end of the harness, the ecu plug, another large plug (which is obvious where it goes so ok), and then 2 blue relay plugs. On the 240sx harness though there is one blue relay plug, and then this 8wire little white plug that attatches to a plug that seems to run to the back of the car. What to I do with this difference? I found which of the 2 relay plugs match up, but I am left with an unaccounted for relay plug on the sr harness and a empty white plug in the car. what should I do?

oumu · 08-18-2005, 06:16 PM

Quote:

Originally Posted by sepulchral

sr20det spark plugs are code BKR7E-11

by NGK

Those sparkplugs fit but aren't OEM and are one step colder than stock.
Be sure you regap them to 0.9mm (0.036in).

The correct OEM plugs are double platinum:
NGK PFR6B-9
And I think this is the Nissan Part Number:
22401-27N66

You can also use NGK Iridium:
BKR6EIX
BKR6EVX
BKR6EIX-P

Or traditional spark plugs like he listed:
BKR6E

You can change all those sixs to sevens to get colder plugs.
(e.g. BKR7EIX)

1121S13 · 08-18-2005, 07:03 PM

Quote:

Originally Posted by brrr

Hey, I am doing an s14 sr into s14 96 240sx and I have the complete wring harness and the jdm ecu. There are four plugs on the inside-of-the-firewall end of the harness, the ecu plug, another large plug (which is obvious where it goes so ok), and then 2 blue relay plugs. On the 240sx harness though there is one blue relay plug, and then this 8wire little white plug that attatches to a plug that seems to run to the back of the car. What to I do with this difference? I found which of the 2 relay plugs match up, but I am left with an unaccounted for relay plug on the sr harness and a empty white plug in the car. what should I do?

mod said no questions.. fuk man read..
bigass letters
DO NOT POST IN THIS THREAD UNLESS YOU HAVE AN ANSWER TO A FAQ!

-incase of hotpipe clearance issue
to add; If you want your SR hotpipe to sit LOWER(S13 SR), use a S14 turbo inlet pipe..
hotpipe /w bov sits nice and low.

s14 inlet pipe is shorter then s13 inlet pipe.

Kingtal0n · 09-04-2005, 03:26 PM

This is a diagram I made for converting your your #62 harness to work with a J4 ECU, and visca versa.

it illustrates the differences between #62, E5, and J4 ecus.very handy!

http://forums.freshalloy.com/ubbthre...b=5&o=&fpart=1

neilsan · 10-09-2005, 07:17 PM

Quote:

Originally Posted by DuffMan

No its still 7psi. Think about it: A valve that restricts air to the wastegate can only raise the boost not lower it. So if the stock wastegate was really set to 11psi, theres no way a solenoid would bring it down to 7psi. The purpose of the solenoid is slightly faster spool up, by preventing the wastegate from opening part way at lower boost.

Does this thing have that solenoid?

s13envy · 10-13-2005, 03:00 AM

I think with the NGK plug the higher number you go the colder the plug gets. example hotter - bkr6e ; colder - bkr7e Correct me if I'm wrong guys

BoostInnovations · 10-13-2005, 11:19 PM

Quote:

Originally Posted by s13envy

I think with the NGK plug the higher number you go the colder the plug gets. example hotter - bkr6e ; colder - bkr7e Correct me if I'm wrong guys

we've already discovered this...delete my post and his please

turbo_lover · 10-20-2005, 03:54 PM

i have a real quick question ive been wonderin about for a long time... how much does a SR20DET weigh in a base model 240sx?(no power windows,sunroof,etc.)

thanks.

03-28-2005, 05:45 PM	#33
SequenceGarage Leaky Injector Join Date: Mar 2005 Location: Toronto, Ontario, Canada Age: 23 Posts: 82 Trader Rating: (0)	Just posting some things I did not see in this thread, however it may be in the links. Plz delete if overlapping. SR = Block 20 = 2.0L Displacement D = DOHC E = Fuel Injected T = Single Turbocharger 2.0L DOHC Turbo Turbo Type: T25G Compressor A/R: 0.80 Injector Size: 370cc Bore x Stroke: 86.0mm x 86.0mm Displacement: 1998cc Performance: SR20DET: Power (ps): 205@ 6000 rpm Torque (kgm): 28.0@ 4000 rpm Compression Ratio: 8.5:1 Speed Limiter:180 Kmh -112 mph Stock Boost: 7 psi ECU: 62 (redtop) OR E5 (blacktop). 63 (automatic) will also work. MAFS: 89-90 240sx mafs works. Rev Limit: 7500rpm (no need to really go over 7200) Gear Ratios: Gear Ratios - Manual Transmission 1st 3.321 2nd 1.902 3rd 1.308 4th 1.000 5th 0.759 Reverse 3.382 Final 4.083 S13 ECU Pinout (thanks to CM510.com) Zenki S14 SR ECU Pinout (thanks to 200sx.org) Classic battery area wiring diagram from heavy throttle: __________________ Sasha Anis Sequence-Garage

04-07-2005, 03:16 PM	#34
Jeff240sx I hate you too... Join Date: Jul 2001 Location: Tampa, FL Age: 26 Posts: 5,843 Trader Rating: (0) Rides Gallery: Jeff240sx	The power specs, and turbo that Sequence Garage listed are for s13 sr20det only. S14 is 220hp (I think) with a t28 turbo. The s15 is 250hp (again, I think) and uses yet another turbo. -Jeff __________________ Driving a Hyundai now.

04-10-2005, 01:27 AM	#35
BLT123 Leaky Injector Join Date: Apr 2005 Location: Philippines Posts: 71 Trader Rating: (0)	S15 same turbo with cast divider wall, bigger injectors, and I think thicker beams but not sure. Both S14 and S15 blacktops have VVL. __________________

04-16-2005, 02:49 AM	#37
closebyu26 Join Date: Apr 2005 Location: OKINAWA, JP Age: 33 Posts: 49 Trader Rating: (0)	At the bottom of this tread they talk about bhoost for stock sr20det turbo. I have found from personnal experiance that the turbo will at least put out 1.3mb, or 18 psi, but I have stock everything, so detination was the final outcome, but it would put out more if you had bigger inj, front mount IC. I'm running it at 14 psi right now with no problems. Thats with a greddy boost controller. Last edited by closebyu26; 04-16-2005 at 03:17 AM.

04-30-2005, 12:41 PM	#42
mike_fernandes Join Date: Mar 2005 Location: winnipeg Age: 22 Posts: 2 Trader Rating: (0)	Oil Capacities wow.. i think this is my first post ever. This info is for the S14 blacktop motor, it's taken right out of the service manual. hope this helps some of you. Engine Oil: (with filter change): 3 1/4 qt (3.7 L) (w/o filter change): 3 1/8 qt (3.5 L) Cooling System (including resevoir): 5 1/2 qt (6.2 L) Manual Transmission: GL-4 4 1/4 pt (2.4 L) Differential carrier gear oil: GL-5 3 1/8 pt (1.8 L) Automatic Transmission: 7 qt (7.9 L) Power steering 3/4 qt (0.9 L) edit: if anyone doesnt believe this I can back it up with a pic of the page from the manual, but as you can tell I'm new and don't know how to upload pics yet... unless theres someone that can host them for me.

03-14-2005, 11:36 PM	#31
autobahNESSA Zilvia FREAK! Join Date: Aug 2002 Location: Orange County Posts: 1,174 Trader Rating: (1)	Can someone tell me what are the oil presure readings- used the search tool, got for sale threads mainly. Idle sometimes I see 15psi, sometiems 20 mid throttle: 45-60psi full throttle: 80-100psi. during warmup the guage reads 45-60psi. by the way Im useing a Megan Racing guage, it was cheap, so yea are these accurate?

03-15-2005, 04:05 PM	#32
blu808 Premium Member Join Date: Dec 2002 Location: SPACE Age: 26 Posts: 4,686 Trader Rating: (1)	fyi all motors ahould have higher oil press when cold. A good rule of thumb is 10 Psi oil pressure for every thousand rpm. If you have at least this then your good.

04-20-2005, 06:32 AM	#38
gerryb Join Date: Oct 2004 Location: Aust Posts: 3 Trader Rating: (0)	Z32 NA and TT AFM look the same but are different. The difference is that the NA AFM will read up to 350hp or so, the TT one will read up to 500hp. You want the TT AFM.

04-20-2005, 06:37 AM	#39
mjjstang In time-out for misbehaving. Join Date: Apr 2003 Location: Michigan Posts: 2,607 Trader Rating: (4)	your dumb as shit and your post should be removed at once, and when yours is, then mine should follow btw I see you dont post much as youve been here quite a bit longer than your post count would show, I hope this doesnt discourage you from future posting, but I would hope you think next time before pushing bullshit into the mix.

04-20-2005, 09:16 AM	#40
gerryb Join Date: Oct 2004 Location: Aust Posts: 3 Trader Rating: (0)	Hey f$%K you you yanky piece of crap, when you turkey's were still running around in ka truck engine pieces of crap we'd been doing sr conversions etc here for years, (and had complete import s13 sr's here). There are 2 part numbers for Z32 AFM 1 for NA and 1 for TT. They have been tested for voltage to airflow capacity and that's the fact jack, so unless you have been involved intuning them and have the facts shut your stupid dumb shit mouth.

04-26-2005, 12:46 AM	#41
SpeedRacerGTP Join Date: Nov 2004 Location: 20 miles to Graceland Posts: 1 Trader Rating: (0)	What's with the hate? It takes maturity to engage in intelligent discourse without namecalling. If someone says something you disagree with, make it known WITHOUT taking personal jabs. Didn't either of you two go to Kindergarten? Sheesh. http://www.courtesyparts.com/Merchan...e=22680-Z32ALL Apparently the Z32 MAFs have the same part number and are therefore the same for both the TT and the N/A (at least for the USDM, although I highly doubt it would be different elsewhere). So calm down you two!

05-23-2005, 03:29 PM	#43
the head Nissanaholic! Join Date: Jul 2002 Location: in a dark room mastering the art of typing with one hand Posts: 1,998 Trader Rating: (0)	short block has no Head only pistons crank ect __________________ I never knew you could do that with an eggplant

06-03-2005, 09:44 PM	#45
sepulchral BANNED Join Date: Mar 2004 Location: Midlothian. VA Posts: 2,054 Trader Rating: (0)	sr20det spark plugs are code BKR7E-11 by NGK

06-18-2005, 07:02 AM	#46
s13gonwild BANNED Join Date: Jan 2005 Location: cali Posts: 466 Trader Rating: (0)	heres a few had to search for the clutch and main seal that any us cars have... -Front and rear main seal = 93 sentra SER -Stock sr clutch = 89 Nissan Maxima -Timing chain replacement = 89 Nissan Maxima -o2 sensor = 87 300zx turbo -Turbo gaskets = 90-96 tt 300zx -Exhaust/intake manifold gaskets = 93 Sentra SER Also found out you could use a ka radiator on sr but you need a top radiator hose that would travel from the pass side to the driverside and you will need to cut the ends a bit.. you can get the hoses from the following -02 Dodge neon L4 2.0L -96 Buick road master limited V8 8.7L -96 chevrolet caprice classic V8 4.3L/5.7L

06-30-2005, 02:54 AM	#49
Jeff240sx I hate you too... Join Date: Jul 2001 Location: Tampa, FL Age: 26 Posts: 5,843 Trader Rating: (0) Rides Gallery: Jeff240sx	DO NOT POST IN THIS THREAD UNLESS YOU HAVE AN ANSWER TO A FAQ! I just pruned ~40 posts from this thread, too. I'm sick of fucking babysitting these FAQs, and WILL lock them if a simple rule like "Stop asking stupid questions" can't be followed. You have a question without an answer? Step 1. Search. Step 2. Post in the Tech section, NOT THE FUCKING ANSWER THREAD! -Jeff __________________ Driving a Hyundai now.

Sponsored Links

07-16-2005, 02:54 PM	#50
TKOs14 Join Date: Jul 2005 Location: PA Age: 27 Posts: 35 Trader Rating: (0)	sr20det s13 in s14 coolent capacity: "with koyo s14 radiator" 1 3/4 gallons thats all i got...

07-18-2005, 08:32 PM	#51
hellion240sx Zilvia Addict Join Date: Nov 2003 Location: NOLA Age: 28 Posts: 744 Trader Rating: (0)	did a search and found nothing sr20det oil pan holds 3.5 quarts of oil but you can put in four. >>don't know if thats a good or bad thing but i remember it being discussed.<<

07-26-2005, 10:52 AM	#52
s14 blacktop Zilvia Member Join Date: Oct 2004 Location: down south, deep south Age: 29 Posts: 274 Trader Rating: (0) Rides Gallery: s14 blacktop	do not put anymore than 3.5 quarts of oil in your sr.. the rest will be spit out by your engine through your breather valve, unless you like your intercooler and intake to have a thick oil film on the inside. yes it will hurt your engine. __________________ I'm here to inform not to conform... http://www.zilvia.net/photo/data/501/0dansig-thumb.jpg

08-09-2005, 11:00 AM	#53
brrr Join Date: Aug 2005 Location: MA Posts: 1 Trader Rating: (0)	s14 sr into 96 240sx help Hey, I am doing an s14 sr into s14 96 240sx and I have the complete wring harness and the jdm ecu. There are four plugs on the inside-of-the-firewall end of the harness, the ecu plug, another large plug (which is obvious where it goes so ok), and then 2 blue relay plugs. On the 240sx harness though there is one blue relay plug, and then this 8wire little white plug that attatches to a plug that seems to run to the back of the car. What to I do with this difference? I found which of the 2 relay plugs match up, but I am left with an unaccounted for relay plug on the sr harness and a empty white plug in the car. what should I do?

09-04-2005, 03:26 PM	#56
Kingtal0n Join Date: Jul 2005 Location: South Florida Posts: 41 Trader Rating: (0)	This is a diagram I made for converting your your #62 harness to work with a J4 ECU, and visca versa. it illustrates the differences between #62, E5, and J4 ecus.very handy! http://forums.freshalloy.com/ubbthre...b=5&o=&fpart=1

10-13-2005, 03:00 AM	#58
s13envy Zilvia Junkie Join Date: May 2004 Location: Shelbyville, IN Age: 25 Posts: 349 Trader Rating: (2)	I think with the NGK plug the higher number you go the colder the plug gets. example hotter - bkr6e ; colder - bkr7e Correct me if I'm wrong guys

10-20-2005, 03:54 PM	#60
turbo_lover Join Date: Oct 2005 Location: 180sx lover Age: 19 Posts: 17 Trader Rating: (0)	i have a real quick question ive been wonderin about for a long time... how much does a SR20DET weigh in a base model 240sx?(no power windows,sunroof,etc.) thanks. __________________ BOOST is BETTER! 1. Nissan 2. Honda Oh, so you hate #2?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/engine-tech/62607-sr20det-faq.html
Posted By	For	Type	Date	Hits
240SX.net • View topic - sr20det & ca18det parts guide Desantes look at this	This thread	Refback	10-12-2009 08:04 AM	1
[13207-84£Á00] OCN ¥¦¥§¥Ö¸¡º÷·ë²Ì	This thread	Refback	10-11-2009 06:12 PM	1
240SX.net • View topic - sr20det & ca18det parts guide	This thread	Refback	09-04-2009 01:04 PM	1
rebuild of a ka24e - Page 3 - NJTuners.com	This thread	Refback	07-02-2009 01:51 PM	1
Nissanboard \| Primera-Projekte \| [P11] Dezenter P11-Thread - Aktuell: Nocken ahoi	This thread	Refback	07-01-2009 08:02 AM	9
Location Of Fuel Pressure Regulator 1991 Nissan Maxima, Diesel 1982 Nissan Maxima, How To Connect Mp3 To 2006 Nissan Maxima - 203Thermostat	This thread	Refback	03-14-2009 10:35 AM	1
Replacement Batterys For Motor Driven Wheel Chaih, Replacement Battery Sea Doo, Replacement Bicycle Tires - Highlandcampground	This thread	Refback	03-08-2009 01:06 PM	1
87 Nissan 300Zx, 87 Monte Carlo Electrical Diagram, 87 Nissan Sentra - Illusionillustrations	This thread	Refback	03-08-2009 05:45 AM	1
Type R Muffler For A Honda Civic, Tyler Van Roden, Types Of Cars In The 1950S - Illusionspa	This thread	Refback	03-07-2009 02:33 AM	1
Nexopia	This thread	Refback	03-05-2009 06:57 PM	1
Silvia S13 - Page 2 - Preludepower.com	This thread	Refback	10-30-2008 12:28 PM	1