huffandpuff00

Still looking for injectors and cant find any used sard 850cc for sale, SO i found these Power enterprise(PE) 850cc injectors that are denso and look exactly like the sard ones.

Iv searched to see if the PE injectors have any differences to the sard ones but havent found anything but some forums stating that they are sard/PE and the SAME.

Power Enterprise SH850-C 850cc Fuel Injectors Set SR20DET

ANyone using PE injectors or had experience with them?

zac

__________________
forsale: http://zilvia.net/f/sale-items/49874...ing-setup.html

fliprayzin240sx

I dont know if they are exactly the same. I was told at one point that the SARD ones are newer v2 injectors while most still runs the v1 denso injectors. This was what I was told a while ago when I was in the market for injectors, was looking into Nismo/Tomei injectors at first till I was told SARDs were the way to go. Ran SARD 850s on my SR w/ a PFC, and it ran/idled like stock.

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
FS: Topline Aragosta Coilover, Zenki Sideskirts/Valence and Tial V44 gate

huffandpuff00

I was told by Jr_SS that sard 850cc injectors are the newer version and nismo/tomei are the older version denso.

I found these of the PE website:




as far as I can tell the PE are physically the same single hole as SARD, and not a 4 hold like nismo/hks...

__________________
forsale: http://zilvia.net/f/sale-items/49874...ing-setup.html

cotbu

I run sard 850's on nistune, anyway if their not the same that information is close. the lagtimes are the same for my sard 850's

__________________

LoverTechnologies "Half Broken Things!"

Riodcs

I have PE 850 side feed injectors for over 2 years and I love em.
Last year I could get off from em 1000cc at higher fuel pressure without any problems

KA-T

huffandpuff00

^^Glad to hear that you are not having any problems with them!

I called phase2 today and spoke with someone about the PE 850cc and he said that they are identical on the outside, but there is no way of telling if PE had its own specs done to the internals of the injector.

I imagine there cant be that much difference internally between Sard and PE

__________________
forsale: http://zilvia.net/f/sale-items/49874...ing-setup.html