vaughn4

Im running a standalone cluster and i need to program in the millivolts / coolant temps. Im using the 97 KA ECT sensor and the modifry unit to output the signal i need. I have gone into alldata and service manuals and the only info i can get is the resistance. Does anyone have more info or possibly a chart of the voltages of a 97 KA ECT sensor? If not i guess i will have to use a scope to get the millivoltage at every temp.. Thank you for any help on this.

Jesse

__________________

mptjimmy

your best off scoping the guages, its hard to find all the proper sensor data to progam for your custom dash,