MAF not working - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Nibras · 09-01-2009, 07:00 PM

i switched my 1996 obd 2 wire harness and ecu to a 1995 obd1 , and now my MAF seems to not be working , my carr will not exceed over 2000 rpm, it will just keep bouncing do to the sensor.

i need all input on this issue.

i switched my maf to a 95 still nothing.

Nibras · 09-02-2009, 10:31 AM

I pulled these codes

82 crankshaft positiong sensor
41 intake air temp sensor
12 MAF sensor

I changed the maf sensor and still nothinggg

russeljones · 09-05-2009, 08:18 PM

same problem here...except i have a 95 obdII car and put a 96 jwt ecu tuned for 50#inj. and cobra maf. car did not start until i reset the ecu. now it starts but i cant rev past 3000 rpms, and cant drive past 2000 rpms. lmk if you figure out an answer. oh and the maf i have is brand new

09-01-2009, 07:00 PM	#1
Nibras Leaky Injector Join Date: Mar 2009 Location: Orlando , FL Age: 19 Posts: 88 Trader Rating: (1)	MAF not working i switched my 1996 obd 2 wire harness and ecu to a 1995 obd1 , and now my MAF seems to not be working , my carr will not exceed over 2000 rpm, it will just keep bouncing do to the sensor. i need all input on this issue. i switched my maf to a 95 still nothing. Last edited by Nibras; 09-01-2009 at 08:41 PM.

09-02-2009, 10:31 AM	#2
Nibras Leaky Injector Join Date: Mar 2009 Location: Orlando , FL Age: 19 Posts: 88 Trader Rating: (1)	stage2 I pulled these codes 82 crankshaft positiong sensor 41 intake air temp sensor 12 MAF sensor I changed the maf sensor and still nothinggg

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-05-2009, 08:18 PM	#3
russeljones Join Date: Sep 2009 Location: houston Posts: 1 Trader Rating: (0)	same problem here...except i have a 95 obdII car and put a 96 jwt ecu tuned for 50#inj. and cobra maf. car did not start until i reset the ecu. now it starts but i cant rev past 3000 rpms, and cant drive past 2000 rpms. lmk if you figure out an answer. oh and the maf i have is brand new

Sponsored Links