eBay SR wiring services / where did you get your SR wiring done? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s14kozenki · 07-13-2009, 03:03 PM

Hey all just wanted some input on wiring services. Anyone with an sr20det swap : where did you get your wiring done? and for how much? This guy on ebay (seller name damesta) is selling wiring services for pretty cheap (i am putting an s13 sr into my s14). Some feeback claims plug and play, with no negative feedback in sight...

Has anyone had their wiring done by this guy? Or anyone know of anyone local to southern california who can do wiring? There ARE some local people who claim they can do it and have done it before that i know of, but some of em are kinda shady if ya know what i mean.... ghetto-rigging stuff is practically their specialty..

I am just looking for a plug-and-play harness modification, as I already have both a spare SR and KA engine harnesses.

any input would be greatly appreciated!
kevin

Homer_Simpson · 07-13-2009, 03:08 PM

You're in SoCal, there should be a bunch of local guys that can wire up your car nicely. I think GSXRJordan (sorry if I misspelled your handle), does wiring jobs.

I did the wiring myself, all the information are out there. There's even info on how to wire in AC for your specific swap. Check Omikron's blog.

V8slayr · 07-13-2009, 07:44 PM

Myself and a couple of my friends w/ swaps have had their harnesses done by Taylor Durdan on NICO. He runs Durdan Perfab in Florida I believe and does the best job I have seen yet on a wiring harness. I had mine done 3 years ago by wiring specialties (Redtop SR into S14) and had it redone by Durdan a few months ago only to clean it up. It looked like shit before and after I got it back it looks great. Get on NICO and look him up.

fakeshemp44 · 07-13-2009, 08:06 PM

I did some wiring for a friend, his girl was putting an S14 SR into an S13, there is a good write up that I used to do all the wiring for him, I used this link ------>JDM Zenki S14 SR20DET swap into a DOHC S13 - Mestiso.net Nor-Cal Streets Forum

YOU can do it yourself, just follow the directions.

s14kozenki · 07-14-2009, 04:52 PM

thanks for the info and guidance everyone. I know I am mentally capable of doing it myself, but for the first swap I want to have it done professionally (or by someone who knows what they are doing/has done it before). Will check out the people you guys mentioned.

anyone else know any shops preferably in socal that can do it?
kevin

*bardabe* · 07-14-2009, 05:21 PM

where in SoCal are you? I can take care of the wiring in a couple hours. I'm Located in the 951 I;ve fixed countless ghetto rigged wiring jobs as you may already know

s14kozenki · 07-15-2009, 01:23 AM

awesome PM'd you bardabe.

-- so has anyone had an exierience with or know someone who has had their wiring done by eBay seller damesta?
thanks all!
kevin

fakeshemp44 · 07-16-2009, 05:04 AM

I'm telling you man, wiring isn't as hard as you think it is!

g6civcx · 07-16-2009, 06:38 AM

I do wiring myself. I'm not the best, but I know I put in a lot more time than anybody else. Usually I can do a whole SR swap harness in about a weekend, but the way I do it involves removing every single wire that is no longer needed to make the new engine run.

Good luck.

TTrx7Pete · 07-16-2009, 07:47 AM

Did my S14SR in 97 S14 myself. Its just time consuming but you'll be happier you did it yourself if something ever breaks. I created a thread, search my username..

s14kozenki · 07-17-2009, 12:10 AM

thanks for the great help all. I am more and more leaning towards wiring myself, we'll see how it goes!
kevin

fakeshemp44 · 07-18-2009, 01:01 PM

Quote:

Originally Posted by g6civcx

I do wiring myself. I'm not the best, but I know I put in a lot more time than anybody else. Usually I can do a whole SR swap harness in about a weekend, but the way I do it involves removing every single wire that is no longer needed to make the new engine run.

That's the only right way to do it, no one wants a few plugs hanging in there that serve no purpose, esp these kids that post these threads "help!! C@n't figure out where plug goes". LAWLZ.

jevus · 03-11-2010, 05:40 PM

Hey waz up, im in the lax area. Could u do my wiring and how much. I just droped in my redtop but now i need the harness customized to fit my s13. Can u help. Hit me up

g-via · 03-11-2010, 05:42 PM

Quote:

Originally Posted by g6civcx

I do wiring myself. I'm not the best, but I know I put in a lot more time than anybody else. Usually I can do a whole SR swap harness in about a weekend, but the way I do it involves removing every single wire that is no longer needed to make the new engine run.

Good luck.

Come re-wire my SR

Sileighty_85 · 03-11-2010, 06:21 PM

Wiring Specialties Replacement Harnesses
For your set up your in luck^^

07-13-2009, 03:03 PM	#1
s14kozenki Zilvia Member Join Date: Sep 2008 Location: SOCAL Posts: 185 Trader Rating: (5)	eBay SR wiring services / where did you get your SR wiring done? Hey all just wanted some input on wiring services. Anyone with an sr20det swap : where did you get your wiring done? and for how much? This guy on ebay (seller name damesta) is selling wiring services for pretty cheap (i am putting an s13 sr into my s14). Some feeback claims plug and play, with no negative feedback in sight... Has anyone had their wiring done by this guy? Or anyone know of anyone local to southern california who can do wiring? There ARE some local people who claim they can do it and have done it before that i know of, but some of em are kinda shady if ya know what i mean.... ghetto-rigging stuff is practically their specialty.. I am just looking for a plug-and-play harness modification, as I already have both a spare SR and KA engine harnesses. any input would be greatly appreciated! kevin

07-13-2009, 03:08 PM	#2
Homer_Simpson Zilvia Junkie Join Date: Jun 2008 Location: BFE Posts: 355 Trader Rating: (5)	You're in SoCal, there should be a bunch of local guys that can wire up your car nicely. I think GSXRJordan (sorry if I misspelled your handle), does wiring jobs. I did the wiring myself, all the information are out there. There's even info on how to wire in AC for your specific swap. Check Omikron's blog. __________________

07-13-2009, 08:06 PM	#4
fakeshemp44 Zilvia Addict Join Date: Oct 2006 Location: ask me Posts: 657 Trader Rating: (6)	I did some wiring for a friend, his girl was putting an S14 SR into an S13, there is a good write up that I used to do all the wiring for him, I used this link ------>JDM Zenki S14 SR20DET swap into a DOHC S13 - Mestiso.net Nor-Cal Streets Forum YOU can do it yourself, just follow the directions. __________________ Need wiring done? I have my electrical engineering certification.

07-14-2009, 05:21 PM	#6
bardabe Performance Development Join Date: Aug 2005 Location: SoCali 951 Age: 20 Posts: 3,365 Trader Rating: (1) Rides Gallery: bardabe	where in SoCal are you? I can take care of the wiring in a couple hours. I'm Located in the 951 I;ve fixed countless ghetto rigged wiring jobs as you may already know __________________ Custom Fabrication, Wiring Services, and Parts Development Welded Diferentials, Lifetime Warranty no questions asked Review Thread Ask me anything http://formspring.me/bardabe http://zilvia.net/f/media-forum-pict...z-speedtv.html

07-16-2009, 05:04 AM	#8
fakeshemp44 Zilvia Addict Join Date: Oct 2006 Location: ask me Posts: 657 Trader Rating: (6)	I'm telling you man, wiring isn't as hard as you think it is! __________________ Need wiring done? I have my electrical engineering certification.

07-13-2009, 07:44 PM	#3
V8slayr Leaky Injector Join Date: Dec 2007 Location: Huntsville, AL Age: 24 Posts: 119 Trader Rating: (3)	Myself and a couple of my friends w/ swaps have had their harnesses done by Taylor Durdan on NICO. He runs Durdan Perfab in Florida I believe and does the best job I have seen yet on a wiring harness. I had mine done 3 years ago by wiring specialties (Redtop SR into S14) and had it redone by Durdan a few months ago only to clean it up. It looked like shit before and after I got it back it looks great. Get on NICO and look him up.

07-14-2009, 04:52 PM	#5
s14kozenki Zilvia Member Join Date: Sep 2008 Location: SOCAL Posts: 185 Trader Rating: (5)	thanks for the info and guidance everyone. I know I am mentally capable of doing it myself, but for the first swap I want to have it done professionally (or by someone who knows what they are doing/has done it before). Will check out the people you guys mentioned. anyone else know any shops preferably in socal that can do it? kevin

07-15-2009, 01:23 AM	#7
s14kozenki Zilvia Member Join Date: Sep 2008 Location: SOCAL Posts: 185 Trader Rating: (5)	awesome PM'd you bardabe. -- so has anyone had an exierience with or know someone who has had their wiring done by eBay seller damesta? thanks all! kevin

07-16-2009, 06:38 AM	#9
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,453 Trader Rating: (4)	I do wiring myself. I'm not the best, but I know I put in a lot more time than anybody else. Usually I can do a whole SR swap harness in about a weekend, but the way I do it involves removing every single wire that is no longer needed to make the new engine run. Good luck.

07-16-2009, 07:47 AM	#10
TTrx7Pete Zilvia Member Join Date: Apr 2008 Location: Florida Age: 28 Posts: 179 Trader Rating: (0)	Did my S14SR in 97 S14 myself. Its just time consuming but you'll be happier you did it yourself if something ever breaks. I created a thread, search my username.. __________________ 1993 AW Mazda RX-7 1997 Nissan Silvia

07-17-2009, 12:10 AM	#11
s14kozenki Zilvia Member Join Date: Sep 2008 Location: SOCAL Posts: 185 Trader Rating: (5)	thanks for the great help all. I am more and more leaning towards wiring myself, we'll see how it goes! kevin

03-11-2010, 05:40 PM	#13
jevus Join Date: Dec 2009 Location: L.N.X Posts: 49 Trader Rating: (0)	Hey waz up, im in the lax area. Could u do my wiring and how much. I just droped in my redtop but now i need the harness customized to fit my s13. Can u help. Hit me up __________________ CYBORG

03-11-2010, 06:21 PM	#15
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Wishing Back in Okinawa -_- Posts: 2,509 Trader Rating: (0)	Wiring Specialties Replacement Harnesses For your set up your in luck^^ __________________ 後輪駆動車１番 1991 Built SR GT2871R -363whp 1998 S14 W/RB25- Rebuild in Progress

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

Sponsored Links