AFC not getting TACH SIGNAL

gripDRIFTschassis · 08-22-2008, 09:43 PM

I know a few are gonna flame for me using an AFC......

I installed the AFC NEO and everything is working fine its just that its not getting a tach signal and i dont want to tune it with it only going by the TPS.. just need some advice..

***Have a SOHC Cluster in the car..also wanted to know if me not having the DOHC Cluster effects the AFC also not to read RPM'S***

THANKS..

yokotavia · 08-23-2008, 09:56 AM

check the wire connection on the tach signal wire and triple check to make sure both wires are the correct color

good luck

Massimo Power · 08-23-2008, 10:40 AM

its definetly the wire that reads from the ecu.. you need to check that...

gripDRIFTschassis · 08-25-2008, 12:00 PM

kinda stupid but i caught it....
cluster just needed to be changed to the DOHC....

THANKS

08-22-2008, 09:43 PM	#1 (permalink)
gripDRIFTschassis Join Date: Jul 2008 Location: Brooklyn Posts: 5 Trader Rating: (0)	AFC not getting TACH SIGNAL I know a few are gonna flame for me using an AFC...... I installed the AFC NEO and everything is working fine its just that its not getting a tach signal and i dont want to tune it with it only going by the TPS.. just need some advice.. *Have a SOHC Cluster in the car..also wanted to know if me not having the DOHC Cluster effects the AFC also not to read RPM'S* THANKS..

08-23-2008, 09:56 AM	#2 (permalink)
yokotavia Zilvia Member Join Date: Dec 2007 Location: Yokota, Japan Posts: 181 Trader Rating: (4)	check the wire connection on the tach signal wire and triple check to make sure both wires are the correct color good luck __________________ need anything from japan? i can hook u up better than pimp my ride.

08-23-2008, 10:40 AM	#3 (permalink)
Massimo Power Zilvia.net Advertiser Join Date: Jul 2008 Location: Corona, CA Posts: 269 Trader Rating: (6)	its definetly the wire that reads from the ecu.. you need to check that... __________________ www.massimopower.com Open Mon-Fri 10am-6pm but online all the time lol Special Thanks To: www.jlbmotorsports.com www.wiredonhonda.com For Their Continued Support

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links
Remove these ads by purchasing a Premium Membership with Zilvia.net!

08-25-2008, 12:00 PM	#4 (permalink)
gripDRIFTschassis Join Date: Jul 2008 Location: Brooklyn Posts: 5 Trader Rating: (0)	kinda stupid but i caught it.... cluster just needed to be changed to the DOHC.... THANKS