my car wont start need help

bb.b0y · 08-13-2008, 06:22 PM

i installed ARP headstuds,and apexi head gasket..compression was 135,140,135,150 before i took the head off....now its at 60 compression on all for...and it cranks but wont start...need help...

drftthatshit · 08-14-2008, 01:29 PM

oh yeah u fucked up you timed it wrong start tearing it apart again sorry man or u smashed the valves

((sr)) kelly · 08-14-2008, 01:34 PM

why did you make 2 threads?

i already told you you messed the timing up some how...

here is a good tip..

if you arent 100% sure your timing is correct, pull the plugs and rotate the engine my turning the crank with a ratchett on the crank pully..

let it make about 3-5 revolutions to be safe.. if it doesnt jam up or hit anything then it is safe to try and start it

08-13-2008, 06:22 PM	#1 (permalink)
bb.b0y BANNED Join Date: Aug 2008 Location: San Juan Capistrano Age: 20 Posts: 47 Trader Rating: (0)	my car wont start need help i installed ARP headstuds,and apexi head gasket..compression was 135,140,135,150 before i took the head off....now its at 60 compression on all for...and it cranks but wont start...need help...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links
Remove these ads by purchasing a Premium Membership with Zilvia.net!

08-14-2008, 01:29 PM	#2 (permalink)
drftthatshit Zilvia Member Join Date: Jul 2008 Location: fox lake Age: 20 Posts: 194 Trader Rating: (0)	oh yeah u fucked up you timed it wrong start tearing it apart again sorry man or u smashed the valves

08-14-2008, 01:34 PM	#3 (permalink)
((sr)) kelly In time-out for misbehaving. Join Date: Jun 2007 Location: Zebulon... NC Posts: 1,030 Trader Rating: (5)	why did you make 2 threads? i already told you you messed the timing up some how... here is a good tip.. if you arent 100% sure your timing is correct, pull the plugs and rotate the engine my turning the crank with a ratchett on the crank pully.. let it make about 3-5 revolutions to be safe.. if it doesnt jam up or hit anything then it is safe to try and start it