Change the spark lugs and Wires KA-DE won't starts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

phi_ho1 · 07-05-2008, 09:09 AM

Just got my 240sx 93 KA-DE last weekend and i'm doing some tune up right now. the car had 121007 on it and running strong. but i got a problem right now. after the replace i replace the spark lug and wires the car won't start.

phatkatsquad · 08-06-2008, 01:12 AM

well id help but be more specific it cranks but wont start or it wont crank?

steve_o1989 · 08-06-2008, 01:22 AM

You put all the wires back in the same order they came off?

*soreballz* · 08-06-2008, 01:34 AM

Quote:

Originally Posted by phi_ho1

i replace the spark lug and wires the car won't start.

Well, theres your problem right there. You used lugs instead of plugs.

drifts135 · 08-06-2008, 01:38 AM

If the car is turning over but spitting, kicking back, popping, etc all while failing to start up... Then you put the leads on in the wrong order. Look around on here or MAYBE even on the distributor cap for the right places for the wires to go....1234 will go just like you see them....

If the car does not turn over at all..... Did you disconnect the battery to do the job and not reinstall the lead? Just checkin'....

drftthatshit · 08-06-2008, 09:42 AM

you got the firing order wrong if it ran befor the wires and not any more make sure you got them in proper order and then make sure you click the plug boots down on to the plugs

07-05-2008, 09:09 AM	#1
phi_ho1 Zilvia Junkie Join Date: Jun 2008 Location: CALI - OC 714 GG Posts: 411 Trader Rating: (7)	Change the spark lugs and Wires KA-DE won't starts Just got my 240sx 93 KA-DE last weekend and i'm doing some tune up right now. the car had 121007 on it and running strong. but i got a problem right now. after the replace i replace the spark lug and wires the car won't start.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

08-06-2008, 01:12 AM	#2
phatkatsquad Join Date: Jul 2008 Location: Del Rio Tx Posts: 16 Trader Rating: (0)	well id help but be more specific it cranks but wont start or it wont crank?

08-06-2008, 01:22 AM	#3
steve_o1989 Zilvia Junkie Join Date: Sep 2006 Location: Regina, SK Age: 20 Posts: 539 Trader Rating: (6)	You put all the wires back in the same order they came off?

08-06-2008, 01:38 AM	#5
drifts135 Zilvia Junkie Join Date: Dec 2004 Location: Baltimore Posts: 595 Trader Rating: (0)	If the car is turning over but spitting, kicking back, popping, etc all while failing to start up... Then you put the leads on in the wrong order. Look around on here or MAYBE even on the distributor cap for the right places for the wires to go....1234 will go just like you see them.... If the car does not turn over at all..... Did you disconnect the battery to do the job and not reinstall the lead? Just checkin'....

08-06-2008, 09:42 AM	#6
drftthatshit Zilvia Member Join Date: Jul 2008 Location: fox lake Age: 22 Posts: 193 Trader Rating: (0)	you got the firing order wrong if it ran befor the wires and not any more make sure you got them in proper order and then make sure you click the plug boots down on to the plugs