S13/S14 Steel One Piece Driveshafts $200!!!!! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

unicoladron · 10-18-2007, 09:09 AM

Quote:

Originally Posted by soon2bs13

does it matter if we have ABS or NON-ABS? isn't one shorter than the other?

yes it definitely matters. the diff housing on cars with ABS are slightly longer, thus requiring a shorter driveshaft.

Hey Jess,

when can we expect these to be shipped?

*DALAZ_68* · 10-18-2007, 11:26 AM

Quote:

Originally Posted by MrChow

Stock 2-piece 20lb
Steel 1-piece 15lb
alum 1-piece 11lb

So you have this for S14 manual non-abs one?

wow is this accurate in the weight differrence ...

R&D Factory · 10-18-2007, 12:26 PM

Alright guys, just to clear some things up, They weigh roughly 15lbs or so

Available for S13/S14 SR Manual

S14 abs or non- abs, please be specific as the ABS ones are made to order and those require a deposit.

S13

unicoladron · 10-18-2007, 12:29 PM

woo hoo no-abs ftw!

markyboi · 10-18-2007, 12:36 PM

what about the s13 hicas ones? since the super hicas came with lsd, would your s13 driveshaft fit on the hicas models?

R&D Factory · 10-18-2007, 12:54 PM

No sir, unfortunately they wont, sorry bout that

Slidin240Wayz · 10-18-2007, 12:56 PM

Quote:

Originally Posted by Slidin240Wayz

S14
Non ABS
Manual
07083

Also, who is making these?

Are they harmonically balanced?

Have you tried them out on your car(s)?

................

slideways2004 · 10-18-2007, 01:51 PM

can we get a custom one made for the same price of a little bit more? if we give you the length and all measurements required.

tibbar650 · 10-18-2007, 03:22 PM

S14
Non ABS
Manual
94403

*DALAZ_68* · 10-18-2007, 04:24 PM

Quote:

Originally Posted by Slidin240Wayz

S14
Non ABS
Manual
07083

Also, who is making these?

Are they harmonically balanced?

Have you tried them out on your car(s)?

im wondering the same thing here...no offense...jsut tryin to stay safe

*upSLIDEdown* · 10-18-2007, 04:42 PM

So I assume you can do an S13 with a J30 diff (has the ABS sensor). I'm also curious about who's making them as well. I would assume they'd have to be Harmonically Balanced. What kind of u-joints are in these and are the replaceable? What kinda time frame would I be looking at? Also, how much shipped to a business address 24502?

Thanks,
Bryan

R&D Factory · 10-18-2007, 05:15 PM

Quote:

Originally Posted by Slidin240Wayz

S14
Non ABS
Manual
07083
Also, who is making these?
Are they harmonically balanced?
Have you tried them out on your car(s)?

250 shipped, we can't say but it's one of our trusted business partners. Yes, they are balanced and we are now running these is some of our cars with no problems

Quote:

Originally Posted by slideways2004

can we get a custom one made for the same price of a little bit more? if we give you the length and all measurements required.

Yes we can do a custom setup. It will require extra time, so let us know measurements and we'll get you a quote.

Quote:

Originally Posted by tibbar650

S14
Non ABS
Manual
94403

230 shipped to ya

Quote:

Originally Posted by upSLIDEdown

So I assume you can do an S13 with a J30 diff (has the ABS sensor). I'm also curious about who's making them as well. I would assume they'd have to be Harmonically Balanced. What kind of u-joints are in these and are the replaceable? What kinda time frame would I be looking at? Also, how much shipped to a business address 24502?

Thanks,
Bryan

Yes we can do a suctom setup. I need measurements and I'll get you a quote. Time frame is a couple days.

Thanks Guys!!!!

I have 3 S14 Non-ABS ready to roll out!!!!!

*upSLIDEdown* · 10-18-2007, 05:26 PM

Quote:

Originally Posted by R&D Factory

Yes we can do a suctom setup. I need measurements and I'll get you a quote. Time frame is a couple days.

Thanks Guys!!!!

It should be the same as an S13 with ABS. That's essentially what it is. S13 with a J30 diff (which has the ABS sensor on it). Do you guys already have the S13 with ABS measurements?

Also, you didn't answer the question about U-joints. What kind are they and are the replaceable?? (Clips holding them in?)

R&D Factory · 10-18-2007, 05:36 PM

We don't have the measurements for those yet, if you can give us some we can deffinately get one made for you, turn around time is a couple days and as far as the U-joints go, they're oem ones, not aftermarket.

I have Pics Up Now Guys!!

-Jess

onefst240 · 10-18-2007, 05:36 PM

How much shipped to 14305. THanks

R&D Factory · 10-18-2007, 05:43 PM

Quote:

Originally Posted by onefst240

How much shipped to 14305. THanks

245 to NY

ZenkiCam · 10-18-2007, 08:44 PM

so this driveshaft would work with an RB25?

unicoladron · 10-19-2007, 08:18 AM

^^--nah dude, RB25 is totally different, i don't know the exact measurements but i think driveshaft shop has the specs on their site.

*DALAZ_68* · 10-19-2007, 08:43 AM

Quote:

Originally Posted by unicoladron

^^--nah dude, RB25 is totally different, i don't know the exact measurements but i think driveshaft shop has the specs on their site.

doest the RB25 tranny mesh prperly with the KA drive shaft,,? so shouldnt it be good....or is the lineup only with SR trannies

unicoladron · 10-19-2007, 08:53 AM

Quote:

Originally Posted by DALAZ_68

doest the RB25 tranny mesh prperly with the KA drive shaft,,? so shouldnt it be good....or is the lineup only with SR trannies

did a quick search and found this:

http://www.driftcentral.com/forum/showthread.php?t=2076

Read part 3 about the driveshaft, the RB25 tranny is longer than ka or sr

*upSLIDEdown* · 10-19-2007, 09:38 AM

Quote:

Originally Posted by R&D Factory

as far as the U-joints go, they're oem ones, not aftermarket.

-Jess

So are they brand new OEM, or are these used stock shafts you guys are chopping the ends off or and using to make up the one pc shafts? Just curious.

*DALAZ_68* · 10-19-2007, 11:05 AM

Quote:

Originally Posted by unicoladron

did a quick search and found this:

http://www.driftcentral.com/forum/showthread.php?t=2076

Read part 3 about the driveshaft, the RB25 tranny is longer than ka or sr

guess i was thining of the Rb20...

R&D Factory · 10-19-2007, 11:53 AM

Quote:

Originally Posted by upSLIDEdown

So are they brand new OEM, or are these used stock shafts you guys are chopping the ends off or and using to make up the one pc shafts? Just curious.

The U-Joints are being reused for the setup

R&D Factory · 10-20-2007, 12:48 PM

Limited sale is almost up guys, so get your orders in!!!

k's_silvia2.0 · 10-20-2007, 12:54 PM

Hey clean up your inbox for god's sake.

R&D Factory · 10-20-2007, 01:24 PM

Quote:

Originally Posted by k's_silvia2.0

Hey clean up your inbox for god's sake.

Sorry about that, something happened with the advertising this and we contacted Bob about it so we're just waiting for it to be cleared up.

Sorry guys.

You can E-mail us at Rndfactory@yahoo.com in the meantime.

Thanks, Jess

k's_silvia2.0 · 10-20-2007, 01:28 PM

Hey is Edward back yet?

R&D Factory · 10-20-2007, 01:33 PM

Quote:

Originally Posted by k's_silvia2.0

Hey is Edward back yet?

Yessir he is

*AznDrftr.* · 10-20-2007, 01:33 PM

Interested shippped 76522

and whats stock weight on one of those?

R&D Factory · 10-20-2007, 01:44 PM

Quote:

Originally Posted by AznDrftr.

Interested shippped 76522

and whats stock weight on one of those?

Lookin 230 shipped and the weight on it is 15 lbs

-Jess

10-18-2007, 12:26 PM	#33
R&D Factory Zilvia.net Advertiser Join Date: Sep 2005 Location: Montebello City, CA Posts: 993 Trader Rating: (15)	Alright guys, just to clear some things up, They weigh roughly 15lbs or so Available for S13/S14 SR Manual S14 abs or non- abs, please be specific as the ABS ones are made to order and those require a deposit. S13 __________________

10-18-2007, 12:29 PM	#34
unicoladron Zilvia Junkie Join Date: Jul 2007 Location: Long Island, NY Age: 25 Posts: 569 Trader Rating: (0)	woo hoo no-abs ftw! __________________ 1993 KA24DE for sale with 180k..running when pulled.... need to get rid of ASAP...i'm moving

10-18-2007, 12:54 PM	#36
R&D Factory Zilvia.net Advertiser Join Date: Sep 2005 Location: Montebello City, CA Posts: 993 Trader Rating: (15)	No sir, unfortunately they wont, sorry bout that __________________

10-18-2007, 04:42 PM	#41
upSLIDEdown O fuckin' G Join Date: Oct 2002 Location: VA.. And for those that keep PMing me asking what kit I have, it's Origin Stream. Posts: 1,691 Trader Rating: (2)	So I assume you can do an S13 with a J30 diff (has the ABS sensor). I'm also curious about who's making them as well. I would assume they'd have to be Harmonically Balanced. What kind of u-joints are in these and are the replaceable? What kinda time frame would I be looking at? Also, how much shipped to a business address 24502? Thanks, Bryan __________________

10-18-2007, 05:36 PM	#44
R&D Factory Zilvia.net Advertiser Join Date: Sep 2005 Location: Montebello City, CA Posts: 993 Trader Rating: (15)	We don't have the measurements for those yet, if you can give us some we can deffinately get one made for you, turn around time is a couple days and as far as the U-joints go, they're oem ones, not aftermarket. I have Pics Up Now Guys!! -Jess __________________

10-18-2007, 12:36 PM	#35
markyboi Zilvia FREAK! Join Date: Feb 2006 Location: california Posts: 1,100 Trader Rating: (0)	what about the s13 hicas ones? since the super hicas came with lsd, would your s13 driveshaft fit on the hicas models?

10-18-2007, 01:51 PM	#38
slideways2004 Zilvia FREAK! Join Date: Apr 2005 Location: Houston Posts: 1,204 Trader Rating: (1)	can we get a custom one made for the same price of a little bit more? if we give you the length and all measurements required.

10-18-2007, 03:22 PM	#39
tibbar650 Join Date: Jul 2006 Location: cali Posts: 9 Trader Rating: (0)	S14 Non ABS Manual 94403

10-18-2007, 05:36 PM	#45
onefst240 Leaky Injector Join Date: Jul 2005 Location: Niagara Falls Ny Age: 21 Posts: 148 Trader Rating: (0)	How much shipped to 14305. THanks

10-18-2007, 08:44 PM	#47
ZenkiCam Zilvia Addict Join Date: Jun 2007 Location: Atlanta Georgia Posts: 672 Trader Rating: (2)	so this driveshaft would work with an RB25?

10-19-2007, 08:18 AM	#48
unicoladron Zilvia Junkie Join Date: Jul 2007 Location: Long Island, NY Age: 25 Posts: 569 Trader Rating: (0)	^^--nah dude, RB25 is totally different, i don't know the exact measurements but i think driveshaft shop has the specs on their site. __________________ 1993 KA24DE for sale with 180k..running when pulled.... need to get rid of ASAP...i'm moving

10-20-2007, 12:48 PM	#54
R&D Factory Zilvia.net Advertiser Join Date: Sep 2005 Location: Montebello City, CA Posts: 993 Trader Rating: (15)	Limited sale is almost up guys, so get your orders in!!! __________________

10-20-2007, 12:54 PM	#55
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 23 Posts: 4,996 Trader Rating: (15)	Hey clean up your inbox for god's sake. __________________ Click here to see my Buyer/Seller thread!!!. http://i36.tinypic.com/34e3n7b.png http://i57.photobucket.com/albums/g2...oukebigsig.jpg

10-20-2007, 01:28 PM	#57
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 23 Posts: 4,996 Trader Rating: (15)	Hey is Edward back yet? __________________ Click here to see my Buyer/Seller thread!!!. http://i36.tinypic.com/34e3n7b.png http://i57.photobucket.com/albums/g2...oukebigsig.jpg

10-20-2007, 01:33 PM	#59
AznDrftr. Premium Member Join Date: Apr 2006 Location: 254 \| Texas. Age: 23 Posts: 2,192 Trader Rating: (3) Rides Gallery: AznDrftr.	Interested shippped 76522 and whats stock weight on one of those? __________________ Central Texas Auto Forums NEED A COMPANY BANNER TO ADVERTISE YOUR SERVICE!? PM ME! R.I.P- Thomas Sane - Lorezno Ponce DeLeon - Maurice Moore - Jorge Lopez

Sponsored Links

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/drivetrain/161025-s13-s14-steel-one-piece-driveshafts-200-a.html
Posted By	For	Type	Date	Hits
R&D Factory	This thread	Refback	07-30-2008 12:04 AM	1