Part Number for JDM S14 Kouki front lip - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cookie · 07-25-2005, 06:43 AM

Hi.

Anyone got the part number or a lip they want to sell. (But more interested in the part number)

Got to be the original JDM Kouki Lip

Thanks

C.

*OptionZero* · 07-25-2005, 12:53 PM

PM "Turdz" he has the lip (not for sale) and might be able to get a part # off of it.

TurDz · 07-25-2005, 02:22 PM

Sorry, I never bothered to actually record the part number, it wasn't obvious at all either (stamped very fainly). And I don't think I'm taking off the lip ever...hehe. unless I crash my front end, knock on wood.

good luck

*SimpleS14* · 07-25-2005, 07:44 PM

Damn you.......

***S14DB*** · 07-25-2005, 08:43 PM

It's typically not stamped on urethane parts. It's only on the box.

cookie · 07-26-2005, 05:01 AM

Bummer , i have a possible part number but i am not sure that is correct.
and don't want to order one if its wrong.

k6010-80F50

Also see

Any help would be great.

I have not yet see a nissan part that did not have a part number on it.

Even my Z-edition valance has a part number on it.

C.

cookie · 07-26-2005, 05:18 AM

just found your fitting guide
http://www.zilvia.net/f/showthread.p...ighlight=kouki

Nice, how much lower is it than the std kouki bumper?

Thanks

C.

*OptionZero* · 07-26-2005, 10:08 AM

It does hang lower than the USDM Bumper, but the USDM one slants upward.

It is not significantly lower IIRC than the JDM bumper w/o lip

cookie · 07-26-2005, 11:41 AM

Ok , thanks.

I have seen that the greddy lip is about 1 inch lower than the bumper with out the lip and still a fair bit higher than the std US type bumper with the lip.

Based on the photos that i found that show the screw holes i can work out a rough depth of the lip below the kouki bumper.

Will keep looking in to it as am trying to keep my car std nissan bits

So far have...

Silvia kouki grill
Silvia kouki bonnet badge
240sx front indicators
almera side indicators
200sx Z-edition valance
Silvia kouki rear wing
200sx euro rear fog (replaces the reflector blank on UK cars)
Silvia folding mirrors
350z 18" alloys
R32 GTR front brakes
S15 intercooler

to go on
S15 6 speed gearbox
S14 climate control+loom
Silvia kouki bumper and fogs and amber indicators (clears on the way).

C.

projectRDM · 07-26-2005, 12:40 PM

Glad to see you stumbled over here cookie. I'm RDM over on sxoc, the US counterpart to your car.

cookie · 07-26-2005, 04:18 PM

Hi.

Yep still not done the climate control.

C.

*OptionZero* · 07-26-2005, 04:57 PM

hey, you got the z-valence! Are those rare over in Europe? I believe i stumbled across a company that was making fiberglass replicas over in the UK, but they were still really expensive and I don't know if that every went through

There's maybe 2 others I've heard of in America

KOUKI KA-T · 07-26-2005, 04:58 PM

Quote:

Originally Posted by cookie

Ok , thanks.

I have seen that the greddy lip is about 1 inch lower than the bumper with out the lip and still a fair bit higher than the std US type bumper with the lip.

Ha, no way.
Trust lip on mine is much lower than the USDM was on that bumper. Huge difference.
And it lowers the front end by about 2"+
I love the optional JDM aero, except for the front lip. It's too high.

TurDz · 07-26-2005, 08:16 PM

Quote:

Originally Posted by KOUKI KA-T

Ha, no way.
Trust lip on mine is much lower than the USDM was on that bumper. Huge difference.
And it lowers the front end by about 2"+
I love the optional JDM aero, except for the front lip. It's too high.

the raised front edge of the lip just helps me front scraping the front end...when my car is lowered, you'll barely notice

but I do understand why many may not like it. guys, it's ugly!!

cookie · 07-27-2005, 02:45 AM

Quote:

Originally Posted by OptionZero

hey, you got the z-valence! Are those rare over in Europe? I believe i stumbled across a company that was making fiberglass replicas over in the UK, but they were still really expensive and I don't know if that every went through

There's maybe 2 others I've heard of in America

Yes very rare , i bribed nissan.de to make me this one last year from the original mould , it was fugging expensive. cost more than my wheels.

SRBPower do a look a like valance for £199 i think so that is $347 ish

pic of my car
http://81.130.138.87/JAE%202005/dscf0003.html (big pic)

C.

cookie · 07-27-2005, 02:47 AM

Quote:

Originally Posted by KOUKI KA-T

Ha, no way.
Trust lip on mine is much lower than the USDM was on that bumper. Huge difference.
And it lowers the front end by about 2"+
I love the optional JDM aero, except for the front lip. It's too high.

i said USDM with lip is lower than the greddy/trust/gracer lip (I know i was looking at one in detail at the weekend)

KOUKI KA-T · 07-27-2005, 06:03 AM

Quote:

Originally Posted by cookie

i said USDM with lip is lower than the greddy/trust/gracer lip (I know i was looking at one in detail at the weekend)

Yes I know, that's what I am talking about. I went from USDM bumper with coresponding lip to JDM bumper with Trust lip. I have both, trust lip is lower.

cookie · 08-18-2005, 03:56 AM

anyone found a part number yet?

C.

*OptionZero* · 08-18-2005, 11:18 AM

KA-T: yeah, if the jdm aero bumper (w/o option part) were maybe half an inch lower, it would blend perfectly into the rest of the aero. Plus urethane + oem fit> all

cookie: you sure u want the lip? i don't think it flows with the z-valence, but that is my opinion =P
the picture doesn't work!

get the K's wing, we can be aero buddies

dont forget to post on www.freshalloy.com, there are knowledgeable people there as well

*SimpleS14* · 08-18-2005, 06:17 PM

OptionZero - Yashio Factory bumper is close to what your describing.

TEAMMiSCHiEFS14 · 08-18-2005, 10:41 PM

Here's the pic of the front lip japanparts.com found for me awhile ago.. hope it helps..

*OptionZero* · 08-18-2005, 11:44 PM

pics? i'll search, but can you post if you got any

TEAMMiSCHiEFS14 · 08-19-2005, 12:28 AM

here's pics of TurDz's car..

***S14DB*** · 08-19-2005, 12:57 AM

Quote:

Originally Posted by cookie

Bummer , i have a possible part number but i am not sure that is correct.
and don't want to order one if its wrong.

k6010-80F50

Also see

Any help would be great.

I have not yet see a nissan part that did not have a part number on it.

Even my Z-edition valance has a part number on it.

C.

My JDM rear only had it on the box. I belive the part number for the lip is 62310-00002

cookie · 08-20-2005, 05:00 PM

Hi.

Thanks, missed the updates.

s14db, i think that is a custom part number (courtseyparts?)

I am pretty confident that the real part number is as i stated above ,am just working on the nissan dealer to order me one.

Let try some more pics for optionzero , oh and i already have the Kouki Se Aero wing.

Thanks guys....

C.

TurDz · 08-20-2005, 05:10 PM

Wow, your car looks very very nice! I don't think you should change it at all. You even have that nicely cut rear bumper/lip to fit the exhuast...that's awesome.

Very clean...much better than my stock SE, stock suspension car heheh

cookie · 08-20-2005, 05:43 PM

Hi.

Thanks, not sure if your taking the mick with the exhaust, but the Nur Spec R does move around a little gets kind of warm so i did not want a melted bumper, in person the cutout looks fine.

Its a bit cleaner than that now.

As i already have a kouki bumper with orange indicators and fogs it will be going on , but i want one last crack at getting the lip. (not sure if i am going to keep the orange kouki indicators, might get some clears)

C.

S_14.5 · 08-21-2005, 03:34 PM

Quote:

Originally Posted by cookie

anyone found a part number yet?

C.

ohhhh fine! here is the #:

KK6010 (Front S14 Kouki Spolier, only)
KK6014 (Front S14 Kouki Spoiler Kit, includes all mou nting brackets, screws, and washers)

These are from my macro fische files...

cookie · 08-21-2005, 03:41 PM

Hi.

Thanks that ties in with the partnumber i had.

C.

*SimpleS14* · 08-21-2005, 05:16 PM

Man I want those headlights and rear wiper.....

07-25-2005, 06:43 AM	#1
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	Part Number for JDM S14 Kouki front lip Hi. Anyone got the part number or a lip they want to sell. (But more interested in the part number) Got to be the original JDM Kouki Lip Thanks C. __________________ http://www.rak42.dial.pipex.com/koukisig.jpg

07-25-2005, 12:53 PM	#2
OptionZero Premium Member Join Date: Jul 2003 Location: SF, CA Age: 26 Posts: 6,159 Trader Rating: (2) Rides Gallery: OptionZero	PM "Turdz" he has the lip (not for sale) and might be able to get a part # off of it. __________________ FOR SALE: pair of SSR Professor SP1 - 17x9.0, +6; 5x114.3

07-25-2005, 07:44 PM	#4
SimpleS14 Keeping it simple... Join Date: Feb 2002 Location: Alexandria, VA Age: 26 Posts: 8,050 Trader Rating: (0) Rides Gallery: SimpleS14	Damn you....... __________________ *Goals are dreams with a deadline.* MA240SX L.H.O.O.Q.

07-25-2005, 08:43 PM	#5
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 14,717 Trader Rating: (1)	It's typically not stamped on urethane parts. It's only on the box. __________________ Comments should be taken as Opinions not as Statements of Fact.

07-26-2005, 10:08 AM	#8
OptionZero Premium Member Join Date: Jul 2003 Location: SF, CA Age: 26 Posts: 6,159 Trader Rating: (2) Rides Gallery: OptionZero	It does hang lower than the USDM Bumper, but the USDM one slants upward. It is not significantly lower IIRC than the JDM bumper w/o lip __________________ FOR SALE: pair of SSR Professor SP1 - 17x9.0, +6; 5x114.3

07-25-2005, 02:22 PM	#3
TurDz Nissanaholic! Join Date: May 2003 Location: Bay Area, CA Age: 26 Posts: 1,620 Trader Rating: (0)	Sorry, I never bothered to actually record the part number, it wasn't obvious at all either (stamped very fainly). And I don't think I'm taking off the lip ever...hehe. unless I crash my front end, knock on wood. good luck

07-26-2005, 05:01 AM	#6
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	Bummer , i have a possible part number but i am not sure that is correct. and don't want to order one if its wrong. k6010-80F50 Also see Any help would be great. I have not yet see a nissan part that did not have a part number on it. Even my Z-edition valance has a part number on it. C.

07-26-2005, 05:18 AM	#7
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	just found your fitting guide http://www.zilvia.net/f/showthread.p...ighlight=kouki Nice, how much lower is it than the std kouki bumper? Thanks C.

07-26-2005, 11:41 AM	#9
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	Ok , thanks. I have seen that the greddy lip is about 1 inch lower than the bumper with out the lip and still a fair bit higher than the std US type bumper with the lip. Based on the photos that i found that show the screw holes i can work out a rough depth of the lip below the kouki bumper. Will keep looking in to it as am trying to keep my car std nissan bits So far have... Silvia kouki grill Silvia kouki bonnet badge 240sx front indicators almera side indicators 200sx Z-edition valance Silvia kouki rear wing 200sx euro rear fog (replaces the reflector blank on UK cars) Silvia folding mirrors 350z 18" alloys R32 GTR front brakes S15 intercooler to go on S15 6 speed gearbox S14 climate control+loom Silvia kouki bumper and fogs and amber indicators (clears on the way). C.

07-26-2005, 12:40 PM	#10
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 36 Posts: 13,495 Trader Rating: (12)	Glad to see you stumbled over here cookie. I'm RDM over on sxoc, the US counterpart to your car. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

07-26-2005, 04:18 PM	#11
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	Hi. Yep still not done the climate control. C.

07-26-2005, 04:57 PM	#12
OptionZero Premium Member Join Date: Jul 2003 Location: SF, CA Age: 26 Posts: 6,159 Trader Rating: (2) Rides Gallery: OptionZero	hey, you got the z-valence! Are those rare over in Europe? I believe i stumbled across a company that was making fiberglass replicas over in the UK, but they were still really expensive and I don't know if that every went through There's maybe 2 others I've heard of in America __________________ FOR SALE: pair of SSR Professor SP1 - 17x9.0, +6; 5x114.3

08-18-2005, 03:56 AM	#18
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	anyone found a part number yet? C.

08-18-2005, 11:18 AM	#19
OptionZero Premium Member Join Date: Jul 2003 Location: SF, CA Age: 26 Posts: 6,159 Trader Rating: (2) Rides Gallery: OptionZero	KA-T: yeah, if the jdm aero bumper (w/o option part) were maybe half an inch lower, it would blend perfectly into the rest of the aero. Plus urethane + oem fit> all cookie: you sure u want the lip? i don't think it flows with the z-valence, but that is my opinion =P the picture doesn't work! get the K's wing, we can be aero buddies dont forget to post on www.freshalloy.com, there are knowledgeable people there as well __________________ FOR SALE: pair of SSR Professor SP1 - 17x9.0, +6; 5x114.3

08-18-2005, 06:17 PM	#20
SimpleS14 Keeping it simple... Join Date: Feb 2002 Location: Alexandria, VA Age: 26 Posts: 8,050 Trader Rating: (0) Rides Gallery: SimpleS14	OptionZero - Yashio Factory bumper is close to what your describing. __________________ *Goals are dreams with a deadline.* MA240SX L.H.O.O.Q.

Sponsored Links

Sponsored Links

08-19-2005, 12:28 AM	#23
TEAMMiSCHiEFS14 Leaky Injector Join Date: Jun 2004 Location: Sacramento, CA Age: 28 Posts: 103 Trader Rating: (0)	here's pics of TurDz's car.. __________________ TEAM MiSCHiEF Sacramento *'98 Aspen White 240SX SE* *'00 Super White Celica GT-S 6-Speed* RIP 4/12/04 Best 1/4: 14.693 @ 93.476mph (Injen CAI)

08-18-2005, 11:44 PM	#22
OptionZero Premium Member Join Date: Jul 2003 Location: SF, CA Age: 26 Posts: 6,159 Trader Rating: (2) Rides Gallery: OptionZero	pics? i'll search, but can you post if you got any __________________ FOR SALE: pair of SSR Professor SP1 - 17x9.0, +6; 5x114.3

08-20-2005, 05:00 PM	#25
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	Hi. Thanks, missed the updates. s14db, i think that is a custom part number (courtseyparts?) I am pretty confident that the real part number is as i stated above ,am just working on the nissan dealer to order me one. Let try some more pics for optionzero , oh and i already have the Kouki Se Aero wing. Thanks guys.... C.

08-20-2005, 05:10 PM	#26
TurDz Nissanaholic! Join Date: May 2003 Location: Bay Area, CA Age: 26 Posts: 1,620 Trader Rating: (0)	Wow, your car looks very very nice! I don't think you should change it at all. You even have that nicely cut rear bumper/lip to fit the exhuast...that's awesome. Very clean...much better than my stock SE, stock suspension car heheh __________________

08-20-2005, 05:43 PM	#27
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	Hi. Thanks, not sure if your taking the mick with the exhaust, but the Nur Spec R does move around a little gets kind of warm so i did not want a melted bumper, in person the cutout looks fine. Its a bit cleaner than that now. As i already have a kouki bumper with orange indicators and fogs it will be going on , but i want one last crack at getting the lip. (not sure if i am going to keep the orange kouki indicators, might get some clears) C.

08-21-2005, 03:41 PM	#29
cookie Leaky Injector Join Date: Mar 2005 Location: Suffolk,England Posts: 126 Trader Rating: (0)	Hi. Thanks that ties in with the partnumber i had. C.

08-21-2005, 05:16 PM	#30
SimpleS14 Keeping it simple... Join Date: Feb 2002 Location: Alexandria, VA Age: 26 Posts: 8,050 Trader Rating: (0) Rides Gallery: SimpleS14	Man I want those headlights and rear wiper..... __________________ *Goals are dreams with a deadline.* MA240SX L.H.O.O.Q.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode