Got my B&M SS in the car. (it sux!) J/K (((((((ITS AWSOME!))))))) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Red · 08-12-2003, 10:45 PM

Yeah so I got home and it was sitting there.. Lookin all perty like a...... Anyways.

So I jumped for joy... Ate my food as fast as I could... And went outside to drop it in, Got the car up on 2 stands, Got out my tools and ripped the old one out... Thing is I dont have plyers to take off the old know... So I just grabbed on and twisted with all my might. and it clicked once left. It took awhile like that to get it off.. What a b!tch it was...

So after that was off I just popped my old shifter out... And undid all 6 bolts... Way easy.. I was woried cuz somone sed they were hard... The knob was hard!

So all that crap was off.. Did a quick cleaning of hands (they were black as night) (I should check for leaks)

And went back outside, Dropped the B&M SS in place and bolted it back on to spec'x, Put it all back together, Dropped on the funky B&M knob (I dislike after one drive)

Put the car down on the ground and put all the tools away.

Total time for all told. (timed!) 1.hr not bad at all.

I'll give the install a 1.5 of 10 harness. If you can change oil... You can handel 6 bolts.

I'm not going to Review it for about a 30 days..

But I will say. You dont have to move but a little bit to shift. Much better! No noise of anykind so far. Dislike knob. No troubble shifting or finding gears.. they are still where I left em.. just a bit closer now.

My leather boot will be in near the 20th i think... Damn out of US shipping...

And I might put on my stock knob... I'll give the B&M a little longer.. see if it grows on me.

Kid Zelda · 08-13-2003, 12:02 AM

.. yeah ...

that is ... great .. un-huh

Here is my B&M SS review

I woke up at about 6:00am, took a **** on Red's car .. LMAO all the way to the ATM took out $220.
After going to a local shop to buy the B&M SS, I was sooo happy, I forgot to pay for the shifter, and so the total price for the shifter was free. Wooo wooooo !

Now it was time for the install, I went to grab the impact gun, turned on the air compressor, got a 12mm socket and an extension, plus a gear wrench for the two upper bolts.

After 20 min's, I had the stock shifter off, I felt proud of myself, half the job done, I deserve a treat, SUBWAY Sandmich ! yes ..

After eating a BMT on Itl' bread, I was ready to complete the install. I took the B&M SS out of the package, it looked sooooo preeeeeetaaay, I almost felt like buying another to mount on the dash, but was afraid if I went back to the shop, they would charge me for two

The install of the B&M was the easy, it was the opposite of pulling the stock one out, I think I may have came up with an easier way to install the B&M shifter .. yo can thank me later, but here is a tip .... *strong hand* Now, time to install the bolts back to secure the B&M SS, I had 6 when I took them off, but now only have 5 .. Therefore , I thought one less bolt is not going to hurt .. right ? SO five (5) bolts are holding it

Now, the test drive ... Well, I can tell you the 5 bolts held fine, but I will wait 60 days before I can tell you what I really think, so stay tuned for my next installment.
thank you

JasonNagra · 08-13-2003, 12:04 AM

GTGuy06 · 08-13-2003, 12:21 AM

fastpace · 08-13-2003, 12:25 AM

Fibercus · 08-13-2003, 01:01 AM

speaking of B&M SS....

Kid Zelda · 08-13-2003, 01:03 AM

Quote:

Originally posted by Fibercus
speaking of B&M SS....

I know, you lucky $&*#&*@#@@

Matt_240 · 08-13-2003, 02:10 AM

wtf is going on here ?? good job on the install zelda.. btw...are you sure its safe to ghetto rig your shifter with only 5 bolts? I would recommend putting the last one in.

*sykikchimp* · 08-13-2003, 10:17 AM

keep it on topic....

Kid Zelda · 08-13-2003, 12:15 PM

Quote:

Originally posted by Matt_240
wtf is going on here ?? good job on the install zelda.. btw...are you sure its safe to ghetto rig your shifter with only 5 bolts? I would recommend putting the last one in.

Yes, it is safe.
I went one up; I took off all the bolts, now I have a QUICK DISCONNECT SHORT SHIFTER (TM) .. Protect against thief

Red · 08-13-2003, 05:07 PM

I dont know if I have the new B&M or not. It has a slight funky humm noise from 2500rpm to 3000rpm... Nothing loud but in a quiet car easy to hear.

So far thats the only negative I have had.

Fibercus · 08-13-2003, 08:45 PM

Quote:

Originally posted by Red
I dont know if I have the new B&M or not. It has a slight funky humm noise from 2500rpm to 3000rpm... Nothing loud but in a quiet car easy to hear.

So far thats the only negative I have had.

Yeah, thats often mentioned on the sites (merchants). I think thats the only common downside if you consider it one

SilviaSR20DET · 08-13-2003, 10:09 PM

Dude KID ZElDA, that is wierd i have the same exact same problem the last bolt on top left is a bitch to turn. It took alot of my strength to turn it and it still isnt all the way in. I was thinking the same thing about the other 5 bolts is if it can hold in which i believe it should be ok. Maybe the model we got was a little mis aligned or something but o well. No problems so far but that shifter is amazing. Shifter is so short and precise also city driving is so much more fun. I give the B&M SS a two thumbs up!

Matt_240 · 08-14-2003, 04:50 AM

Quote:

Originally posted by SilviaSR20DET
Dude KID ZElDA, that is wierd i have the same exact same problem the last bolt on top left is a bitch to turn. It took alot of my strength to turn it and it still isnt all the way in. I was thinking the same thing about the other 5 bolts is if it can hold in which i believe it should be ok. Maybe the model we got was a little mis aligned or something but o well. No problems so far but that shifter is amazing. Shifter is so short and precise also city driving is so much more fun. I give the B&M SS a two thumbs up!

Bill Roberts · 08-14-2003, 06:06 AM

Loosten all the bolts 1 turn (loose) and the last one should be easy..then tighten them all back up.

Red · 08-14-2003, 06:23 PM

Alright. I tossd the B&M knob...

It blows.... Unless you like it VERY cold in the morn... freez your hands off... or when i get off work... Burning HOT!.. yeah it burnt me. Not very smart to grab a metal knob thats been sitting in the sun all day.

The stocker is best for now.

kidinthehall · 08-15-2003, 02:33 PM

Quote:

Originally posted by Matt_240

heh..

240silvia · 08-16-2003, 03:01 AM

So how much is the shifter?

SiL1480 · 08-16-2003, 02:49 PM

Quote:

Originally posted by 240silvia
So how much is the shifter?

Free if you forget to pay

Red · 08-16-2003, 06:00 PM

Its easy to find on the net...

I just got it from Enjuku. it was 250 - 260 shipped... I dont care if its a little it more... I trust Enjuku. thats worth the extra.

Kid Zelda · 08-16-2003, 06:10 PM

Quote:

Originally posted by Red
Its easy to find on the net...

I just got it from Enjuku. it was 250 - 260 shipped... I dont care if its a little it more... I trust Enjuku. thats worth the extra.

IMHO, F*ck enjukie, I would never eva evaevaeva eva buy from them, I rather stay with the stock shifter then buy a B&M from them (enjuku)!

240silvia · 08-17-2003, 01:36 AM

Da*n bro, that sure is a lot of money!!! I love my 240 and all, but I don't think that I could ever see myself paying that much for a short shifter!

Fibercus · 08-17-2003, 02:09 AM

Installed one on my S14 and it performs very good - shifting is sharp & precise, no funky play and it is very efficient. Feels very very solid. I love it

btw, im not just saying it because I coughed up the $$$ for it. I am only trying it out, and got it free

Red · 08-17-2003, 02:12 AM

Well... I buy the best I can aford at the time...

This was a splurge right befor I start school...

I'ma charge all my skool to credit.

Fibercus · 08-17-2003, 02:19 AM

I meant I was stating a fairly unbiased opinion being that I didnt pay for it. I would do the same if I could splurge on the shifer

CoasTek240 · 08-17-2003, 09:44 AM

i just went with the OBX one, its not that bad, i bought it from don @ PDM way back in the day.

old_s13 · 08-19-2003, 02:51 AM

Quote:

Originally posted by sykikchimp
keep it on topic....

I WILL SMOKE SYKIKIKIKCHIMP........!!!

Dont tell people to stay on topic.. YOU stay on topic, biyotch.

240 2NR · 08-19-2003, 09:23 AM

Quote:

Originally posted by SilviaSR20DET
Dude KID ZElDA, that is wierd i have the same exact same problem the last bolt on top left is a bitch to turn. It took alot of my strength to turn it and it still isnt all the way in. I was thinking the same thing about the other 5 bolts is if it can hold in which i believe it should be ok. Maybe the model we got was a little mis aligned or something but o well. No problems so far but that shifter is amazing. Shifter is so short and precise also city driving is so much more fun. I give the B&M SS a two thumbs up!

Did you happen to notice that the bolts coming out were 2 different sizes? You probably have a deep bolt in a shallow hole.

old_s13 · 08-19-2003, 10:27 AM

"You probably have a deep bolt in a shallow hole."

I always have that problem..

*sykikchimp* · 08-19-2003, 10:41 AM

Quote:

Originally posted by old_s13
I WILL SMOKE SYKIKIKIKCHIMP........!!!

Dont tell people to stay on topic.. YOU stay on topic, biyotch.

I'LL STAB YOU IN THE NECK!!! ... WITH A SPORK!

NEVA QWEST0N MI AUTH0RITIE!

--now back to your regularly scheduled topic--

08-12-2003, 10:45 PM	#1
Red Zilvia Addict Join Date: Feb 2002 Location: Vancouver, WA - Portland, OR Age: 28 Posts: 734 Trader Rating: (0)	Got my B&M SS in the car. (it sux!) J/K (((((((ITS AWSOME!))))))) Yeah so I got home and it was sitting there.. Lookin all perty like a...... Anyways. So I jumped for joy... Ate my food as fast as I could... And went outside to drop it in, Got the car up on 2 stands, Got out my tools and ripped the old one out... Thing is I dont have plyers to take off the old know... So I just grabbed on and twisted with all my might. and it clicked once left. It took awhile like that to get it off.. What a b!tch it was... So after that was off I just popped my old shifter out... And undid all 6 bolts... Way easy.. I was woried cuz somone sed they were hard... The knob was hard! So all that crap was off.. Did a quick cleaning of hands (they were black as night) (I should check for leaks) And went back outside, Dropped the B&M SS in place and bolted it back on to spec'x, Put it all back together, Dropped on the funky B&M knob (I dislike after one drive) Put the car down on the ground and put all the tools away. Total time for all told. (timed!) 1.hr not bad at all. I'll give the install a 1.5 of 10 harness. If you can change oil... You can handel 6 bolts. I'm not going to Review it for about a 30 days.. But I will say. You dont have to move but a little bit to shift. Much better! No noise of anykind so far. Dislike knob. No troubble shifting or finding gears.. they are still where I left em.. just a bit closer now. My leather boot will be in near the 20th i think... Damn out of US shipping... And I might put on my stock knob... I'll give the B&M a little longer.. see if it grows on me. __________________ http://www.cardomain.com/memberpage/509537 http://www.imagestation.com/album/?id=4287415487 http://www.zilvia.net/f/showthread.php?t=21036

08-13-2003, 12:02 AM	#2
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,349 Trader Rating: (0)	.. yeah ... that is ... great .. un-huh Here is my B&M SS review I woke up at about 6:00am, took a **** on Red's car .. LMAO all the way to the ATM took out $220. After going to a local shop to buy the B&M SS, I was sooo happy, I forgot to pay for the shifter, and so the total price for the shifter was free. Wooo wooooo ! Now it was time for the install, I went to grab the impact gun, turned on the air compressor, got a 12mm socket and an extension, plus a gear wrench for the two upper bolts. After 20 min's, I had the stock shifter off, I felt proud of myself, half the job done, I deserve a treat, SUBWAY Sandmich ! yes .. After eating a BMT on Itl' bread, I was ready to complete the install. I took the B&M SS out of the package, it looked sooooo preeeeeetaaay, I almost felt like buying another to mount on the dash, but was afraid if I went back to the shop, they would charge me for two The install of the B&M was the easy, it was the opposite of pulling the stock one out, I think I may have came up with an easier way to install the B&M shifter .. yo can thank me later, but here is a tip .... strong hand Now, time to install the bolts back to secure the B&M SS, I had 6 when I took them off, but now only have 5 .. Therefore , I thought one less bolt is not going to hurt .. right ? SO five (5) bolts are holding it Now, the test drive ... Well, I can tell you the 5 bolts held fine, but I will wait 60 days before I can tell you what I really think, so stay tuned for my next installment. thank you Last edited by Kid Zelda; 08-13-2003 at 12:08 AM.

08-13-2003, 12:04 AM	#3
JasonNagra Zilvia FREAK! Join Date: Aug 2002 Location: Long Beach Posts: 1,349 Trader Rating: (0)	ROFL __________________ http://www.imagestation.com/picture/...f/f9dc7664.jpg Edit: check your link.

08-13-2003, 12:21 AM	#4
GTGuy06 Zilvia Member Join Date: Apr 2003 Location: Cincy, OH Age: 21 Posts: 183 Trader Rating: (0)	__________________ Im now the proud owner of a 1990 Maroon 5spd Hatch [Drift]: 1: to move or float smoothly and effortlessly...2: to move along a line of least resistance...3: gradual deviation from an original course...

08-13-2003, 12:25 AM	#5
fastpace Zilvia Addict Join Date: Jul 2001 Location: Houston, TX Age: 28 Posts: 689 Trader Rating: (0) Rides Gallery: fastpace	__________________ life is what you make of it!!!! "well, I go out, I do the practice, I think about it and I concentrate on one small thing I can change that will have an effect. I make that change then I go out and drive to my maximum." -Ayrton Senna

08-13-2003, 01:01 AM	#6
Fibercus Zilvia Addict Join Date: Jul 2001 Location: Canyon Country, CA Age: 29 Posts: 693 Trader Rating: (0)	speaking of B&M SS.... __________________ 2007 BMW 335i Coupe 6MT: Alpine on Red Sport, Prem, Nav, PDC, iPod, CA, H. Seats, H&R, BBS LM

08-13-2003, 02:10 AM	#8
Matt_240 Internet Drifter Join Date: Sep 2002 Location: Hawaii Posts: 879 Trader Rating: (0)	wtf is going on here ?? good job on the install zelda.. btw...are you sure its safe to ghetto rig your shifter with only 5 bolts? I would recommend putting the last one in.

08-13-2003, 10:17 AM	#9
sykikchimp WOW addicted Join Date: Dec 2001 Location: the moon Age: 29 Posts: 6,519 Trader Rating: (0)	keep it on topic.... __________________

08-13-2003, 05:07 PM	#11
Red Zilvia Addict Join Date: Feb 2002 Location: Vancouver, WA - Portland, OR Age: 28 Posts: 734 Trader Rating: (0)	I dont know if I have the new B&M or not. It has a slight funky humm noise from 2500rpm to 3000rpm... Nothing loud but in a quiet car easy to hear. So far thats the only negative I have had. __________________ http://www.cardomain.com/memberpage/509537 http://www.imagestation.com/album/?id=4287415487 http://www.zilvia.net/f/showthread.php?t=21036

08-13-2003, 10:09 PM	#13
SilviaSR20DET Zilvia Addict Join Date: Mar 2002 Location: Renton, WA Posts: 915 Trader Rating: (1)	Dude KID ZElDA, that is wierd i have the same exact same problem the last bolt on top left is a bitch to turn. It took alot of my strength to turn it and it still isnt all the way in. I was thinking the same thing about the other 5 bolts is if it can hold in which i believe it should be ok. Maybe the model we got was a little mis aligned or something but o well. No problems so far but that shifter is amazing. Shifter is so short and precise also city driving is so much more fun. I give the B&M SS a two thumbs up!

08-14-2003, 06:06 AM	#15
Bill Roberts Zilvia FREAK! Join Date: May 2003 Location: S FL. Posts: 1,538 Trader Rating: (0)	Loosten all the bolts 1 turn (loose) and the last one should be easy..then tighten them all back up.

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

08-14-2003, 06:23 PM	#16
Red Zilvia Addict Join Date: Feb 2002 Location: Vancouver, WA - Portland, OR Age: 28 Posts: 734 Trader Rating: (0)	Alright. I tossd the B&M knob... It blows.... Unless you like it VERY cold in the morn... freez your hands off... or when i get off work... Burning HOT!.. yeah it burnt me. Not very smart to grab a metal knob thats been sitting in the sun all day. The stocker is best for now. __________________ http://www.cardomain.com/memberpage/509537 http://www.imagestation.com/album/?id=4287415487 http://www.zilvia.net/f/showthread.php?t=21036

08-16-2003, 03:01 AM	#18
240silvia Nissanaholic! Join Date: Jul 2002 Location: Wilmington NC Age: 24 Posts: 2,022 Trader Rating: (0)	So how much is the shifter?

08-16-2003, 06:00 PM	#20
Red Zilvia Addict Join Date: Feb 2002 Location: Vancouver, WA - Portland, OR Age: 28 Posts: 734 Trader Rating: (0)	Its easy to find on the net... I just got it from Enjuku. it was 250 - 260 shipped... I dont care if its a little it more... I trust Enjuku. thats worth the extra. __________________ http://www.cardomain.com/memberpage/509537 http://www.imagestation.com/album/?id=4287415487 http://www.zilvia.net/f/showthread.php?t=21036

08-17-2003, 01:36 AM	#22
240silvia Nissanaholic! Join Date: Jul 2002 Location: Wilmington NC Age: 24 Posts: 2,022 Trader Rating: (0)	Da*n bro, that sure is a lot of money!!! I love my 240 and all, but I don't think that I could ever see myself paying that much for a short shifter!

08-17-2003, 02:09 AM	#23
Fibercus Zilvia Addict Join Date: Jul 2001 Location: Canyon Country, CA Age: 29 Posts: 693 Trader Rating: (0)	Installed one on my S14 and it performs very good - shifting is sharp & precise, no funky play and it is very efficient. Feels very very solid. I love it btw, im not just saying it because I coughed up the $$$ for it. I am only trying it out, and got it free __________________ 2007 BMW 335i Coupe 6MT: Alpine on Red Sport, Prem, Nav, PDC, iPod, CA, H. Seats, H&R, BBS LM

08-17-2003, 02:12 AM	#24
Red Zilvia Addict Join Date: Feb 2002 Location: Vancouver, WA - Portland, OR Age: 28 Posts: 734 Trader Rating: (0)	Well... I buy the best I can aford at the time... This was a splurge right befor I start school... I'ma charge all my skool to credit. __________________ http://www.cardomain.com/memberpage/509537 http://www.imagestation.com/album/?id=4287415487 http://www.zilvia.net/f/showthread.php?t=21036

08-17-2003, 02:19 AM	#25
Fibercus Zilvia Addict Join Date: Jul 2001 Location: Canyon Country, CA Age: 29 Posts: 693 Trader Rating: (0)	I meant I was stating a fairly unbiased opinion being that I didnt pay for it. I would do the same if I could splurge on the shifer __________________ 2007 BMW 335i Coupe 6MT: Alpine on Red Sport, Prem, Nav, PDC, iPod, CA, H. Seats, H&R, BBS LM Last edited by Fibercus; 08-17-2003 at 02:32 AM.

08-17-2003, 09:44 AM	#26
CoasTek240 Post Whore! Join Date: Jan 2002 Location: VA Age: 25 Posts: 3,019 Trader Rating: (3)	i just went with the OBX one, its not that bad, i bought it from don @ PDM way back in the day.

08-19-2003, 10:27 AM	#29
old_s13 BANNED Join Date: Nov 2001 Location: Los Angeles, CA. Posts: 2,824 Trader Rating: (0)	"You probably have a deep bolt in a shallow hole." I always have that problem..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode