JDM rear valence fit USDM bumper? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

S13S14S15 · 07-22-2003, 07:32 AM

i was wondering if these would fit the USDM bumper?

I know the USDM bumpers don't have the center piece coming down, but would it still fit? i can get a set for really cheap, just don't know if they fit. thanks.

Johny5 · 07-22-2003, 10:07 AM

Absolutely not, the us bumper just curves in, doesn't lip back out to match the contour of those valences. Just go ahead and pick up the valences then pick up the jspec rear.

S13S14S15 · 07-22-2003, 11:18 AM

do you think it would look good on the USDM bumper?

*Dousan_PG* · 07-22-2003, 11:20 AM

Quote:

Originally posted by S13S14S15
do you think it would look good on the USDM bumper?

it wont fit, how do you expect it to look good when it wont seat on the bumper properly??

S13S14S15 · 07-22-2003, 11:22 AM

Quote:

Originally posted by dousan36
it wont fit, how do you expect it to look good when it wont seat on the bumper properly??

i don't understand why they won't fit, only difference of the JDM bumper with the USDM bumper is the lip. So wouldn't it look like this?

*Dousan_PG* · 07-22-2003, 11:26 AM

if it looks like that it looks liks A S S

S13S14S15 · 07-22-2003, 11:28 AM

Quote:

Originally posted by dousan36
if it looks like that it looks liks A S S

but it fits, doesn't it?

*Dousan_PG* · 07-22-2003, 11:29 AM

maybe. not sure i havent compared both

AKADriver · 07-22-2003, 11:31 AM

I don't think it will. The US bumper lacks that lower lip because the flat surface extends downward a little further... IIRC

So it won't match the contour of the bumper.

It'd look like trash even if it did. Get the JDM rear if you want to use those!

*CleanS14* · 07-22-2003, 11:40 AM

and I want those rear valences to put on my s14... since it will look like A S S on your s14 can you pass on the source for these so I can possibly pick them up. My car is going to the shop to get painted this week and it'd be nice to do it all at once

-Jay

S14Speed997 · 07-22-2003, 11:51 AM

It looks like crap if you plan on doing that....

Looks like Leon Spinx with his knocked out teeth in the middle.....

Johny5 · 07-22-2003, 11:52 AM

Even if you did fit em, it'd look about as cool as this.

S13S14S15 · 07-22-2003, 10:02 PM

Quote:

Originally posted by iEATrice
and I want those rear valences to put on my s14... since it will look like A S S on your s14 can you pass on the source for these so I can possibly pick them up. My car is going to the shop to get painted this week and it'd be nice to do it all at once

-Jay

Yeah, I guess it looks bad...if you want them, email francisco from silviaparts.com, he sourced them for me. he says the paint is scratched, but it's not like that matters, since you have to repaint them anyways. i was also trying to convince him to make copies of the valence, and design a rear lip for the USDM bumper...if he does it, it would be hot. but i am still waiting for an answer from him.

gsu240 · 07-23-2003, 04:02 AM

S13S14S15- you say you can get them for cheap? well get them and sell them to me because i have the JDM rear bumper

S13S14S15 · 07-23-2003, 04:15 AM

Quote:

Originally posted by gsu240
S13S14S15- you say you can get them for cheap? well get them and sell them to me because i have the JDM rear bumper

the reason i can get them for cheap is because i know francisco personally, so if i get it for cheap from him and sell it, then i would be the biggest dick ever. sorry, can't help you, just email him and ask him how much he wants for it.

S13S14S15 · 07-23-2003, 04:53 AM

i think i am going to get zenki ones, they should fit on the USDM bumper right?

*revat619* · 07-23-2003, 06:57 AM

Quote:

Originally posted by S13S14S15
i think i am going to get zenki ones, they should fit on the USDM bumper right?

yes, the jdm zenki rear add-ons will fit.

S13S14S15 · 07-23-2003, 07:54 AM

ok, that's my new mission, to get a set of those for cheap

*CleanS14* · 07-23-2003, 11:37 AM

The zenki's are easier to find than the kouki rears... I've seen a few on here before and eventhough I can't recall where, I know there are some available on the usual silvia part importer sites like Jspec...

wylin · 07-23-2003, 01:06 PM

Quote:

Originally posted by S13S14S15
Yeah, I guess it looks bad...if you want them, email francisco from silviaparts.com, he sourced them for me. he says the paint is scratched, but it's not like that matters, since you have to repaint them anyways. i was also trying to convince him to make copies of the valence, and design a rear lip for the USDM bumper...if he does it, it would be hot. but i am still waiting for an answer from him.

wack, dont polute our market and cars with poorly fitting knock off copies made of fiberglass.

The reason people get factory parts like this is because 1 it fits properly, 2 it comes with proper finish and mounting hardware. and finally 3 its made of abs plastic not junk fiberglass.

BTW this is coming for some one w/ the kouki bumper and real kouki rear valence.

*CleanS14* · 07-23-2003, 01:16 PM

I agree with Will... I could have had some copies made... but it just doesn't seem right... I know it's cheaper and all... but IMO you get what you pay for... nothing can beat the perfect fit and ABS plastic aero parts... especially when they're rare... I know what it's like to have a real gracer aero kit and then see some knock off on the road... just makes me shake my head... authentic is the only way to go IMO

I got the valences BTW so thanks for helping me to find the missing link to completing my exterior mods

-Jay

pruto · 07-23-2003, 01:24 PM

Quote:

Originally posted by wylin
wack, dont polute our market and cars with poorly fitting knock off copies made of fiberglass.

The reason people get factory parts like this is because 1 it fits properly, 2 it comes with proper finish and mounting hardware. and finally 3 its made of abs plastic not junk fiberglass.

BTW this is coming for some one w/ the kouki bumper and real kouki rear valence.

but not everyone has the connections you do Will, there aren't enough of those things to go around. Its also a money issue, some people not only want to find it, but want to find it "for cheap".

like me, ain't no way in the 9 hells i'm gonna shell out 700 for a real nismo rear bumper

wylin · 07-23-2003, 06:13 PM

then paul, they shouldnt have it if they dont got the cash flow to afford a real one. actually for this specific item u can order it from dealer in japan new, and it comes painted. It takes about 2-3 weeks to order and ship, and if u got ur color code u can just order a piece w/ correct matched color.

CA18 Dori · 08-18-2003, 10:39 AM

that spoiler ****es me off **** you!

*Dousan_PG* · 08-18-2003, 10:42 AM

mmmmmm'k..................

wylin · 08-18-2003, 10:47 AM

Quote:

Originally posted by wylin
then paul, they shouldnt have it if they dont got the cash flow to afford a real one. actually for this specific item u can order it from dealer in japan new, and it comes painted. It takes about 2-3 weeks to order and ship, and if u got ur color code u can just order a piece w/ correct matched color.

also note its a pain to mount w.o drilling new holes and double sided taping it. Versus the way it mounts w/ stock hard ware 2 sets of clips, 6 screws, 3m sticky tape already positioned on piece.

mbmbmb23 · 08-18-2003, 10:52 AM

Outta last month's dumpster and back on the front page.

07-22-2003, 07:32 AM	#1
S13S14S15 Zilvia Member Join Date: Jun 2003 Location: silvia Posts: 193 Trader Rating: (0)	JDM rear valence fit USDM bumper? i was wondering if these would fit the USDM bumper? I know the USDM bumpers don't have the center piece coming down, but would it still fit? i can get a set for really cheap, just don't know if they fit. thanks.

07-22-2003, 10:07 AM	#2
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 24 Posts: 2,645 Trader Rating: (4)	Absolutely not, the us bumper just curves in, doesn't lip back out to match the contour of those valences. Just go ahead and pick up the valences then pick up the jspec rear. __________________ VICEROY our sigs the talk of the town

07-22-2003, 11:26 AM	#6
Dousan_PG Pink GodziRa Join Date: May 2002 Location: Orange County, California Age: 30 Posts: 16,322 Trader Rating: (10) Rides Gallery: Dousan_PG	if it looks like that it looks liks A S S __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

07-22-2003, 11:29 AM	#8
Dousan_PG Pink GodziRa Join Date: May 2002 Location: Orange County, California Age: 30 Posts: 16,322 Trader Rating: (10) Rides Gallery: Dousan_PG	maybe. not sure i havent compared both __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

07-22-2003, 11:31 AM	#9
AKADriver Post Whore! Join Date: May 2002 Location: McLean, VA Age: 28 Posts: 3,096 Trader Rating: (0)	I don't think it will. The US bumper lacks that lower lip because the flat surface extends downward a little further... IIRC So it won't match the contour of the bumper. It'd look like trash even if it did. Get the JDM rear if you want to use those! __________________ 2000 Miata When changing your brake fluid, remember to dispose of any excess fluid properly. It might be inconvenient, but there's no excuse for not drinking it all.

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

07-22-2003, 11:18 AM	#3
S13S14S15 Zilvia Member Join Date: Jun 2003 Location: silvia Posts: 193 Trader Rating: (0)	do you think it would look good on the USDM bumper?

07-22-2003, 11:40 AM	#10
CleanS14 it's NOT a show car!! Join Date: May 2003 Location: Bay Area, CA Posts: 1,936 Trader Rating: (6) Rides Gallery: CleanS14	If you don't get them can you pass on the source to me... and I want those rear valences to put on my s14... since it will look like A S S on your s14 can you pass on the source for these so I can possibly pick them up. My car is going to the shop to get painted this week and it'd be nice to do it all at once -Jay __________________ FALKEN \| VERTEX \| DGR FABRICATION \| ENDLESS USA \| P2MD

07-22-2003, 11:51 AM	#11
S14Speed997 Zilvia Junkie Join Date: Mar 2003 Location: Tampa, FL Age: 29 Posts: 527 Trader Rating: (0)	It looks like crap if you plan on doing that.... Looks like Leon Spinx with his knocked out teeth in the middle..... __________________ I love signatures that aren't over 400x200!

07-22-2003, 11:52 AM	#12
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 24 Posts: 2,645 Trader Rating: (4)	Even if you did fit em, it'd look about as cool as this. __________________ VICEROY our sigs the talk of the town

07-23-2003, 04:02 AM	#14
gsu240 Zilvia Junkie Join Date: Mar 2002 Location: GA Age: 27 Posts: 411 Trader Rating: (0)	S13S14S15- you say you can get them for cheap? well get them and sell them to me because i have the JDM rear bumper __________________ A one night stand will last until morning, syphilis will last a lifetime.

07-23-2003, 04:53 AM	#16
S13S14S15 Zilvia Member Join Date: Jun 2003 Location: silvia Posts: 193 Trader Rating: (0)	i think i am going to get zenki ones, they should fit on the USDM bumper right?

07-23-2003, 07:54 AM	#18
S13S14S15 Zilvia Member Join Date: Jun 2003 Location: silvia Posts: 193 Trader Rating: (0)	ok, that's my new mission, to get a set of those for cheap

07-23-2003, 11:37 AM	#19
CleanS14 it's NOT a show car!! Join Date: May 2003 Location: Bay Area, CA Posts: 1,936 Trader Rating: (6) Rides Gallery: CleanS14	The zenki's are easier to find than the kouki rears... I've seen a few on here before and eventhough I can't recall where, I know there are some available on the usual silvia part importer sites like Jspec... __________________ FALKEN \| VERTEX \| DGR FABRICATION \| ENDLESS USA \| P2MD

07-23-2003, 01:16 PM	#21
CleanS14 it's NOT a show car!! Join Date: May 2003 Location: Bay Area, CA Posts: 1,936 Trader Rating: (6) Rides Gallery: CleanS14	I agree with Will... I could have had some copies made... but it just doesn't seem right... I know it's cheaper and all... but IMO you get what you pay for... nothing can beat the perfect fit and ABS plastic aero parts... especially when they're rare... I know what it's like to have a real gracer aero kit and then see some knock off on the road... just makes me shake my head... authentic is the only way to go IMO I got the valences BTW so thanks for helping me to find the missing link to completing my exterior mods -Jay __________________ FALKEN \| VERTEX \| DGR FABRICATION \| ENDLESS USA \| P2MD

07-23-2003, 06:13 PM	#23
wylin Zilvia Addict Join Date: Apr 2002 Location: Fob Land Socal Age: 31 Posts: 626 Trader Rating: (0)	then paul, they shouldnt have it if they dont got the cash flow to afford a real one. actually for this specific item u can order it from dealer in japan new, and it comes painted. It takes about 2-3 weeks to order and ship, and if u got ur color code u can just order a piece w/ correct matched color. __________________ 2003 G35 sedan, 03 m45, 06 S2000

08-18-2003, 10:39 AM	#24
CA18 Dori Join Date: Aug 2003 Location: CA Age: 25 Posts: 14 Trader Rating: (0)	that spoiler **es me off ** you! __________________ ~!Project Dorito Coming Soon!~

08-18-2003, 10:42 AM	#25
Dousan_PG Pink GodziRa Join Date: May 2002 Location: Orange County, California Age: 30 Posts: 16,322 Trader Rating: (10) Rides Gallery: Dousan_PG	mmmmmm'k.................. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

08-18-2003, 10:52 AM	#27
mbmbmb23 Zilvia Contributor Join Date: Oct 2001 Location: Charlotte, NC. Posts: 1,765 Trader Rating: (0) Rides Gallery: mbmbmb23	Outta last month's dumpster and back on the front page.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode