~ESSENCE~ S14 1jz build - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*ixfxi* · 10-13-2009, 08:15 PM

Quote:

Originally Posted by Serebros

all of you rb talking SNIP are broke as fuck living with your parents....

MOM!!!!!!!!! MEAAAAAaaaaaaaaaaaaaaaatLOAAAAAAAAAAF!!!!!!!!!!!!! !!!

Quote:

Originally Posted by SuicidnS13

Well my wife and I have the best of both worlds.

you're transvestites?

hermaphroditic porn, best of both worlds

jza240sx · 10-13-2009, 09:58 PM

nice buld!! props to a fellow 240 jz owner

*S14_Kouki* · 10-13-2009, 10:01 PM

Quote:

Originally Posted by JVD

Ugh. You're annoying.

Cool story brah!

slideways2004 you have mail.

slideways2004 · 10-23-2009, 08:42 PM

got the transmission situation all worked out. its all bolted in and ready to rock. Put the center console in to get a test fit. ONce the leather boot is on, it'll look stock

got the relocation plumbed and mounted. in the future i'll run an oil cooler, as simple as switching 1 line around.

got the aeromotive afpr mounted and lines hooked up

picked up something cool

how it looked at the end of the day

tricky_ab · 10-23-2009, 09:05 PM

Looking good! Thanks for the update!

*udon!* · 10-23-2009, 09:05 PM

wait, is this essence, real or ultimate nature?

*RurouniMidnight* · 10-23-2009, 09:10 PM

why yes i think it is

slideways2004 · 10-23-2009, 09:17 PM

Quote:

Originally Posted by RurouniMidnight

why yes i think it is

I agree with this gentleman

slideways2004 · 10-24-2009, 12:02 AM

need help with my throttle cable. let me know if you have any suggestions

custom throttle cable??

CursedGTR · 10-24-2009, 04:33 AM

I am diggin it.

To all the Wannabe "purists" talking that Nissan only Jazz - get money, build car and STFU.

Ali 556 · 10-24-2009, 07:54 AM

Quote:

Originally Posted by slideways2004

thanks man.

the rb is a little longer also than the 2jz/1jz also, so clearance up front is even worse . I also think the jz is a much better engine. there's a reason why many people swap these instead of rb's. How many times have you seen a rx-7, s2k, or even a corvette with a rb?

not really bashing the RB, they are amazing motors. Lets not turn this thread into a debate. Lets focus on a badass 1jz s14 currently being built.

So true,

And parts are ever where..not like th Rb2x you must order everything..

Any way on of the con(s) of a xJz swap is:

The DP is 20mm away from the stock fuel lines...a simple crack And woushshshs

You car is on fire...you can swap the WHOLE lines to the other side...but it will be running besides you x'' MP - Catback,

Don't get me wrong...hell i'm swapping a 2JZ into My S14 as we speak....

Keep the god work...Oh and about the TB cable...Cut the stock one to the length you need...Or get a 98 lexus LS400 or 2000+ LX470 TB cable...Direct bolt on on supra with aft market intake mani,

*udon!* · 10-24-2009, 01:37 PM

wats the actual dimensions of this motor compared to the rb25?

how much smaller/bigger is it?

(i dont mean displacement, but actual physical sizes.)

daverussell · 10-24-2009, 03:02 PM

Quote:

Originally Posted by Serebros

would everybody please shut the fuck up and watch this build, all of you rb talking SNIP are broke as fuck living with your parents....

LULZ. That is amazing.....

JDM Sil4ty · 10-25-2009, 01:08 AM

nice build ... what are the plansss brooo ?!

steve shadows · 10-26-2009, 01:17 AM

Quote:

Originally Posted by S14_Kouki

God I hate supra engines, Nice zenki tho

GOSH

ME TOO!!!

I say either go SR20DET or V8

nothing in between

JK LOL JK LOL!!!!!

Seriously JK LOL

build looks sick

slideways2004 · 10-26-2009, 01:31 AM

Quote:

Originally Posted by steve shadows

GOSH

ME TOO!!!

I say either go SR20DET or V8

nothing in between

JK LOL JK LOL!!!!!

Seriously JK LOL

build looks sick

haha, if only I had you to tune the PFC for this!

slideways2004 · 10-29-2009, 09:45 PM

the updates have been a little slow. I can only work on this car on Sundays and last weekend we went to LoneStar Bash in Mineral Wells so that took up a weekend.

this is me trying to figure out the tie downs for the car. Have i ever mentioned I hate trailers? You can see my truck in the picture, i'm going for matching white truck and car!! haha

took the subframe out. bushings looked pretty good, but they're still getting the solids. any suggestions on subframe colors??

slideways2004 · 11-09-2009, 05:57 PM

Had a subframe party over the weekend. Both got Powered by Max subframe risers. They should help a little with the insane amount of torque that will be going through them :roflmao. A lot of times axles break b/c the angle of the cv/axle is so off due to the car being so low.

Mine is the powered by max knock off color and Justin has the nismo power brace knock off

jr_ss · 11-09-2009, 06:23 PM

Supra engines are an amazing engine, it's the owners that are retarded. No offense, but every Supra I see has a lagtastic Turbo on it that spools at 6K and has a 2k rpm powerband. They make insane amounts of power, but in my mind, that is not a fun car...

The build looks great, It'll be nice to see it up and running. Don't rush anything by any means though. Keep the updates coming.

*BOXCAR* · 11-09-2009, 06:37 PM

I think you should put some Tony The Tiger stripes on the subframe.

slideways2004 · 11-09-2009, 07:55 PM

Quote:

Originally Posted by jr_ss

Supra engines are an amazing engine, it's the owners that are retarded. No offense, but every Supra I see has a lagtastic Turbo on it that spools at 6K and has a 2k rpm powerband. They make insane amounts of power, but in my mind, that is not a fun car...

The build looks great, It'll be nice to see it up and running. Don't rush anything by any means though. Keep the updates coming.

I understand completely. I'm building this with response and reliability as the two top priorities. Peak hp is the least of my worries.

turbo is a small garrett bb and mid-mount intercooler setup

Boxcar: we were actually talking about this while spraying it. Its a cool idea but it wouldn't look right b/c so many parts of the subframe are hidden

Creizai · 11-11-2009, 02:46 PM

I'm going with the same swap on my S14, guessing you'll prolly go 3076r like me right?

.

Looking good, its going to be nice to look to this thread once I start my swap.

slideways2004 · 11-12-2009, 11:17 AM

Quote:

Originally Posted by Creizai

I'm going with the same swap on my S14, guessing you'll prolly go 3076r like me right?

.

Looking good, its going to be nice to look to this thread once I start my swap.

yeah man, i have to go on the supra boards a lot. some of these supra guys are pretty weird.

97240TB · 11-12-2009, 04:27 PM

Car looks great man keep up the great work!

KingZazu · 11-12-2009, 05:03 PM

I'm going for the same project ! sold my R33 skyline to get a s14 I could swap a jz in it... why are you selling your ruckus mount ? Don't like them or ?

slideways2004 · 11-12-2009, 10:47 PM

Quote:

Originally Posted by KingZazu

I'm going for the same project ! sold my R33 skyline to get a s14 I could swap a jz in it... why are you selling your ruckus mount ? Don't like them or ?

i used other mounts that were custom made.

the ruckus mounts work good though. one of my friends uses them.

I have been seeing a lot of interest lately with people that are doing the swap and people that are thinking about it. Feel free to ask me an questions about it.

p.s. I have lots of updates coming, just need to find my camera and take pics.

slideways2004 · 11-13-2009, 10:02 PM

some more updates. All the little stuff takes forever!

installed clutch master with ss line to slave. During bleeding, some brake fluid leaked out on the engine bay. Didnt see it til the next day when all the paint was fucked up. So I had to repaint a section of the bay

Mounted the pbm air separator thing

got the subframe in with the risers, arms, 2 way, etc.

a pic of the risers to show how much it raises it. You run into some problems with the risers. Have to relocate e-brake cables, deep wall socket doesn't fit into the differential bolts in the subframe, the ruca bolts have to go in backwards.

Also got a steel driveshaft made rated to over 600ish.

Deftec · 11-14-2009, 04:49 AM

OMFGGGG SRRRRRRRRRRR's FOR LIFFEEEEEEEEE*wackin it*

Rofl. Looks like a good build man. bout to pull my jz out and build it up.

roplusbee · 11-14-2009, 05:14 PM

Looking good so far. I will definitely be watching this one for updates. Are you going with a "name brand" or custom manifold? Just curious as to what your plan is for the downpipe and other exhaust components. My friend dismantled his MKIII and is letting me get his Blitz TT setup, so I just wanted to see how you planned. Keep up the awesome work.

*MrFairlady* · 11-15-2009, 12:19 AM

Subscribed!

nice work.

10-23-2009, 09:10 PM	#37
RurouniMidnight Lost in the Shadows Join Date: Feb 2004 Location: Houston TX Age: 26 Posts: 331 Trader Rating: (5)	why yes i think it is __________________

10-25-2009, 01:08 AM	#44
JDM Sil4ty Leaky Injector Join Date: Sep 2009 Location: Elk Grove, Ca Age: 18 Posts: 137 Trader Rating: (3)	nice build ... what are the plansss brooo ?! __________________ Ohbaby !

11-09-2009, 06:23 PM	#49
jr_ss Zilvia Addict Join Date: Dec 2005 Location: Venice, Fl Posts: 642 Trader Rating: (10)	Supra engines are an amazing engine, it's the owners that are retarded. No offense, but every Supra I see has a lagtastic Turbo on it that spools at 6K and has a 2k rpm powerband. They make insane amounts of power, but in my mind, that is not a fun car... The build looks great, It'll be nice to see it up and running. Don't rush anything by any means though. Keep the updates coming. __________________ Built 95' S14....

11-09-2009, 06:37 PM	#50
BOXCAR Premium Member Join Date: May 2008 Location: Richmond, TX Age: 25 Posts: 188 Trader Rating: (1)	I think you should put some Tony The Tiger stripes on the subframe. __________________ I dont give a shit how a dolphin cries.... http://essencegarage.wordpress.com/

11-11-2009, 02:46 PM	#52
Creizai Zilvia Junkie Join Date: Mar 2005 Location: Cincinnati Age: 24 Posts: 307 Trader Rating: (2)	I'm going with the same swap on my S14, guessing you'll prolly go 3076r like me right? . Looking good, its going to be nice to look to this thread once I start my swap. __________________ http://img118.imageshack.us/img118/5...izaisigwi7.jpg

10-13-2009, 09:58 PM	#32
jza240sx Leaky Injector Join Date: Aug 2009 Location: New Jersey Posts: 135 Trader Rating: (4)	nice buld!! props to a fellow 240 jz owner

10-23-2009, 08:42 PM	#34
slideways2004 Zilvia FREAK! Join Date: Apr 2005 Location: Houston Posts: 1,204 Trader Rating: (1)	got the transmission situation all worked out. its all bolted in and ready to rock. Put the center console in to get a test fit. ONce the leather boot is on, it'll look stock got the relocation plumbed and mounted. in the future i'll run an oil cooler, as simple as switching 1 line around. got the aeromotive afpr mounted and lines hooked up picked up something cool how it looked at the end of the day

10-23-2009, 09:05 PM	#35
tricky_ab Zilvia Addict Join Date: Sep 2008 Location: Toronto, Canada eh?! Posts: 624 Trader Rating: (4)	Looking good! Thanks for the update!

10-23-2009, 09:05 PM	#36
udon! lets final fantasy 7 drifting Join Date: Mar 2009 Location: MURRIETA Posts: 300 Trader Rating: (0)	wait, is this essence, real or ultimate nature?

10-24-2009, 12:02 AM	#39
slideways2004 Zilvia FREAK! Join Date: Apr 2005 Location: Houston Posts: 1,204 Trader Rating: (1)	need help with my throttle cable. let me know if you have any suggestions custom throttle cable??

10-24-2009, 04:33 AM	#40
CursedGTR Zilvia Junkie Join Date: Aug 2007 Location: Iraq Posts: 410 Trader Rating: (5)	I am diggin it. To all the Wannabe "purists" talking that Nissan only Jazz - get money, build car and STFU.

10-24-2009, 01:37 PM	#42
udon! lets final fantasy 7 drifting Join Date: Mar 2009 Location: MURRIETA Posts: 300 Trader Rating: (0)	wats the actual dimensions of this motor compared to the rb25? how much smaller/bigger is it? (i dont mean displacement, but actual physical sizes.)

10-29-2009, 09:45 PM	#47
slideways2004 Zilvia FREAK! Join Date: Apr 2005 Location: Houston Posts: 1,204 Trader Rating: (1)	the updates have been a little slow. I can only work on this car on Sundays and last weekend we went to LoneStar Bash in Mineral Wells so that took up a weekend. this is me trying to figure out the tie downs for the car. Have i ever mentioned I hate trailers? You can see my truck in the picture, i'm going for matching white truck and car!! haha took the subframe out. bushings looked pretty good, but they're still getting the solids. any suggestions on subframe colors??

11-09-2009, 05:57 PM	#48
slideways2004 Zilvia FREAK! Join Date: Apr 2005 Location: Houston Posts: 1,204 Trader Rating: (1)	Had a subframe party over the weekend. Both got Powered by Max subframe risers. They should help a little with the insane amount of torque that will be going through them :roflmao. A lot of times axles break b/c the angle of the cv/axle is so off due to the car being so low. Mine is the powered by max knock off color and Justin has the nismo power brace knock off

11-12-2009, 04:27 PM	#54
97240TB Join Date: Oct 2009 Location: Tampa, Florida Age: 22 Posts: 8 Trader Rating: (0)	Car looks great man keep up the great work!

Sponsored Links

11-12-2009, 05:03 PM	#55
KingZazu Join Date: Nov 2007 Location: Quebec, Canada Age: 19 Posts: 6 Trader Rating: (0)	I'm going for the same project ! sold my R33 skyline to get a s14 I could swap a jz in it... why are you selling your ruckus mount ? Don't like them or ?

11-13-2009, 10:02 PM	#57
slideways2004 Zilvia FREAK! Join Date: Apr 2005 Location: Houston Posts: 1,204 Trader Rating: (1)	some more updates. All the little stuff takes forever! installed clutch master with ss line to slave. During bleeding, some brake fluid leaked out on the engine bay. Didnt see it til the next day when all the paint was fucked up. So I had to repaint a section of the bay Mounted the pbm air separator thing got the subframe in with the risers, arms, 2 way, etc. a pic of the risers to show how much it raises it. You run into some problems with the risers. Have to relocate e-brake cables, deep wall socket doesn't fit into the differential bolts in the subframe, the ruca bolts have to go in backwards. Also got a steel driveshaft made rated to over 600ish.

11-14-2009, 04:49 AM	#58
Deftec Zilvia Member Join Date: Apr 2007 Location: ks Posts: 235 Trader Rating: (0)	OMFGGGG SRRRRRRRRRRR's FOR LIFFEEEEEEEEEwackin it Rofl. Looks like a good build man. bout to pull my jz out and build it up. __________________ 13.1 @ 107. Time to upgrade the stock engine

11-14-2009, 05:14 PM	#59
roplusbee Leaky Injector Join Date: Mar 2007 Location: Iraq Age: 36 Posts: 54 Trader Rating: (0)	Looking good so far. I will definitely be watching this one for updates. Are you going with a "name brand" or custom manifold? Just curious as to what your plan is for the downpipe and other exhaust components. My friend dismantled his MKIII and is letting me get his Blitz TT setup, so I just wanted to see how you planned. Keep up the awesome work. __________________ 1989 240SX - Waiting for me patiently at Zerolift Autolabs.

11-15-2009, 12:19 AM	#60
MrFairlady Premium Member Join Date: Mar 2007 Location: Fascination Street,N.C Age: 31 Posts: 889 Trader Rating: (8) Rides Gallery: MrFairlady	Subscribed! nice work. __________________ -90 Kouki Hatch -95 S14 daily project

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode