Anyone have a clutch pedal OUT of the car? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

projectRDM · 01-27-2009, 11:06 PM

I need a measurement for the through bolt that secures the pedal to the bracket assembly. Three years ago when I bought a clutch pedal and parts new I didn't get a bolt with it all and just used one from a spare pedal I had laying around, I never noticed it but the pedal has side play like the bolt isn't the right diameter. I'm pretty sure the bolt didn't come out of a Nissan pedal, so that may be the problem. If that's not it I'm missing a bushing but I'd like to know which one and where it goes.

Just the diameter, thread pitch, and length please.

drifter_91 · 01-27-2009, 11:20 PM

this goes to wanted to buy not chat

projectRDM · 01-27-2009, 11:27 PM

Quote:

Originally Posted by drifter_91

this goes to wanted to buy not chat

How in hell does measuring a bolt mean I want to buy it? I am going to buy something when I found out what I need asshole.

So if you ask how to wire a pair of foglights, does that mean you're looking to buy some and are posting in the wrong section?

*E Double* · 01-27-2009, 11:31 PM

i have a spare pedal and bracket from a 180SX sitting in my garage that i can check out when i get home if you think it would be the same as your setup

projectRDM · 01-27-2009, 11:37 PM

Quote:

Originally Posted by E Double

i have a spare pedal and bracket from a 180SX sitting in my garage that i can check out when i get home if you think it would be the same as your setup

It is, the S13/S14 share most of the parts within the pedal.

*E Double* · 01-27-2009, 11:39 PM

alright ill check it out when i get home

drifter_91 · 01-27-2009, 11:51 PM

Quote:

Originally Posted by projectRDM

How in hell does measuring a bolt mean I want to buy it? I am going to buy something when I found out what I need asshole.

So if you ask how to wire a pair of foglights, does that mean you're looking to buy some and are posting in the wrong section?

well i did not read your fuckin message asshole i just say your thread
be spacific on your thread soo people will know what to look for

*s13boy89* · 01-27-2009, 11:58 PM

dude you are the idiot that cant read!

C. Senor · 01-27-2009, 11:59 PM

that makes no sense. why dont you read the actual post before you react. you dont say a book is good or bad because you read the title.

holybushoffire · 01-28-2009, 12:02 AM

Quote:

Originally Posted by drifter_91

well i did not read your fuckin message asshole i just say your thread
be spacific on your thread soo people will know what to look for

for a future reference, you are getting on the bad side of the wrong people.

*neverrain* · 01-28-2009, 12:08 AM

projectRDM - Join Date: Dec 2002
Post Count: 11,016

drifter_91 - Join Date: May 2008
Post Count: 78

It's not that we're ganging up on you. It's just that you're stupid.

projectRDM · 01-28-2009, 12:09 AM

Quote:

Originally Posted by drifter_91

well i did not read your fuckin message asshole i just say your thread
be spacific on your thread soo people will know what to look for

1) Punctuation
2) Spelling
3) Grammar
4) Most importantly, READ BEFORE REPLYING

Are you so fucking stupid that you're admitting you replied to a post without even reading it? How could my post be any more specific?

bigOdom1 · 01-28-2009, 12:10 AM

Quote:

Originally Posted by drifter_91

well i did not read your fuckin message asshole i just say your thread
be spacific on your thread soo people will know what to look for

shut up after apologizing you insignifiCUNT. he was very clear on his intentions and you look like a moron. you admit your spewing shit about something you have no clear understanding on. just read what he asks and says and you will quickly learn all kinds of stuff

*drift freaq* · 01-28-2009, 12:17 AM

Quote:

Originally Posted by bigOdom1

shut up after apologizing you insignifiCUNT. he was very clear on his intentions and you look like a moron. you admit your spewing shit about something you have no clear understanding on. just read what he asks and says and you will quickly learn all kinds of stuff

lol he can't even admit to spewing shit, properly!

*theronin* · 01-28-2009, 12:25 AM

hahahahahha this thread is all sorts of awesome. its not everyday russ asks for some help, and when he does, some newb decides to flame him. lol classic. thanks for the laugh rookie. keep it up, ur gonna keep me entertained for many years.

96Turbo · 01-28-2009, 12:31 AM

Quote:

Originally Posted by projectRDM

1) Punctuation
2) Spelling
3) Grammar
4) Most importantly, READ BEFORE REPLYING

Are you so fucking stupid that you're admitting you replied to a post without even reading it? How could my post be any more specific?

um...i think you mean spacific

ah....i've got 3 more weeks of these premie shenanigans till they ask for another token

Quote:

Originally Posted by drifter_91

well i did not read your fuckin message asshole i just say your thread
be spacific on your thread soo people will know what to look for

*E Double* · 01-28-2009, 02:21 AM

As you can see in this photo the bolt is actually not a normal bolt, kinda caught me off guard when i took it out. the tip of the bolt appears to be a 10x1.25 thread but i am gonna have to take it to the hardware store to check it on one of their little thread blocks. after that i can take the measurements if you still want them, i just have to find my measuring tape.

i took this portion of the clutch pedal and slipped it over a lug stud and it was slightly bigger, i want to say that the solid shaft of the bolt is around 13~14mm in diameter. in the photo is a comparison of where the shaft goes through the pedal, the large measurement and where the bolt exits the bracket, the 10mm measurement.

if for some reason you cant source one of these bolts you may be able to drill out the small end of the bracket and find a bolt that will fit snug in the pedal and use that. if not i can probably get you one from the parts store here if i just take them my title.

*ericcastro* · 01-28-2009, 04:22 AM

Almost feel bad, so i cant say anything to this poor guy but,

ouch.
live and learn, read the post mang.

ESmorz · 01-28-2009, 05:08 AM

Quote:

Originally Posted by drifter_91

this goes to wanted to buy not chat

Lol I never got past this post.

Douchebag of the month.

***PHLIP*** · 01-28-2009, 07:42 AM

Quote:

Originally Posted by drifter_91

well i did not read your fuckin message asshole i just say your thread
be spacific on your thread soo people will know what to look for

A few days ago, in a thread that was about paint, you stepped in with a car that you do not own, TOTALLY off topic and posted a picture with "Got Camber?"
That post was mercilessly reported for being out of place. I figured that you were simply a bit confused and let you off with a simple deletion of the post.
Now I see that you're jumping into threads and commenting without even READING the thread? See, it is most important to read the original post when you decides to inject your otherwise unsolicited opinion, so you know what you're responding to. What you're doing is one of the most ANNOYING things in the world, especially when you factor in your getting all butt hurt when people call you on it.
Good going, I see a bright future as a Wal Mart greeter in you.

The Chad · 01-28-2009, 07:57 AM

It really is not every day that projectRDM asks for help...much asks anything haha. And for this NEWB to step in and....arrrrgghhh. You are not worth my time...but thank you PHILIP and other Mods for stepping up and puting random posters in their place. Respect your elders!!! Esp if you want our help later on down the line!!!

projectRDM · 01-28-2009, 10:31 AM

Quote:

Originally Posted by E Double

As you can see in this photo the bolt is actually not a normal bolt, kinda caught me off guard when i took it out. the tip of the bolt appears to be a 10x1.25 thread but i am gonna have to take it to the hardware store to check it on one of their little thread blocks. after that i can take the measurements if you still want them, i just have to find my measuring tape.

i took this portion of the clutch pedal and slipped it over a lug stud and it was slightly bigger, i want to say that the solid shaft of the bolt is around 13~14mm in diameter. in the photo is a comparison of where the shaft goes through the pedal, the large measurement and where the bolt exits the bracket, the 10mm measurement.

if for some reason you cant source one of these bolts you may be able to drill out the small end of the bracket and find a bolt that will fit snug in the pedal and use that. if not i can probably get you one from the parts store here if i just take them my title.

That's perfect, just what I needed. The bolt I used isn't stepped like that so it appears I just need to order the correct OE bolt, I just wanted to make sure there wasn't another bushing or sleeve inside the pedal I was missing. Some cars like my Lexus use a sleeve too and without it the bolt wobbles in the pedal. Funny after stripping apart nearly 100 of these cars I've never taken apart a clutch pedal, I just sell them outright without ever bothering to look at one.

*fliprayzin240sx* · 01-28-2009, 10:32 AM

Hey Russ, if thats the same bolt im thinking...isnt there a plastic bushing that it slides into on the pedal?!?! Can you just be missing that plastic piece, to get rid of the play?

Is that white piece on the pedal a bushing?

*future240* · 01-28-2009, 10:33 AM

Quote:

Originally Posted by PHLIP

I see a bright future as a Wal Mart greeter in you.

Pshh what Walmart greeter is that stupid?

"Sir Stop You stole that TV"
"What do you mean, I have the receipt right here"
"I don't have time to look at those, I just assumed you stole it because you were walking out the door with it"

projectRDM · 01-28-2009, 11:14 AM

Quote:

Originally Posted by fliprayzin240sx

Hey Russ, if thats the same bolt im thinking...isnt there a plastic bushing that it slides into on the pedal?!?! Can you just be missing that plastic piece, to get rid of the play?

Is that white piece on the pedal a bushing?

I have the outer bushings, they fit on the pedal but don't go all the way through I don't think. The parts fiche for the clutch pedal the dealer uses is damn horrible, the blowup is done so shitty you can't tell where anything goes. I'm probably just going to order all the hardware besides the springs because I know those are right. Or I may just push the fucker off a cliff and wave goodbye.

*DaPCWiz* · 01-28-2009, 11:24 AM

Quote:

Originally Posted by drifter_91

well i did not read your fuckin message asshole i just say your thread
be spacific on your thread soo people will know what to look for

Dude... are you kidding me? Granted enough people have already posted telling you that you are an idiot. but wow.

I'm sorry for the thread jack... go back to talking about clutch pedal measurements now.

***S14DB*** · 01-28-2009, 02:55 PM

Do you have all the info now? Cause I have brackets pedals and other parts I can measure.

zugoi · 01-28-2009, 03:20 PM

please reply drifter_91. I need another giggle.

*E Double* · 01-28-2009, 03:37 PM

Quote:

Originally Posted by projectRDM

That's perfect, just what I needed. The bolt I used isn't stepped like that so it appears I just need to order the correct OE bolt, I just wanted to make sure there wasn't another bushing or sleeve inside the pedal I was missing. Some cars like my Lexus use a sleeve too and without it the bolt wobbles in the pedal. Funny after stripping apart nearly 100 of these cars I've never taken apart a clutch pedal, I just sell them outright without ever bothering to look at one.

cool man, if you need anymore info just let me know

projectRDM · 01-28-2009, 04:34 PM

Quote:

Originally Posted by S14DB

Do you have all the info now? Cause I have brackets pedals and other parts I can measure.

Seems I got it, there is no sleeve so I guess the bolt I used isn't stepped. I'll order it tomorrow.
Thanks for the input guys, and the crushing of the noob.

As for the noob, fuck man, you picked the wrong motherfucker to talk shit to. I love it.

01-27-2009, 11:06 PM	#1
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 35 Posts: 13,040 Trader Rating: (12)	Anyone have a clutch pedal OUT of the car? I need a measurement for the through bolt that secures the pedal to the bracket assembly. Three years ago when I bought a clutch pedal and parts new I didn't get a bolt with it all and just used one from a spare pedal I had laying around, I never noticed it but the pedal has side play like the bolt isn't the right diameter. I'm pretty sure the bolt didn't come out of a Nissan pedal, so that may be the problem. If that's not it I'm missing a bushing but I'd like to know which one and where it goes. Just the diameter, thread pitch, and length please. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

01-27-2009, 11:58 PM	#8
s13boy89 Premium Member Join Date: Nov 2007 Location: anaheim Age: 20 Posts: 1,765 Trader Rating: (9)	dude you are the idiot that cant read! __________________ Single Cam FTW!

01-27-2009, 11:59 PM	#9
C. Senor Post Whore! Join Date: May 2006 Location: cali Posts: 3,580 Trader Rating: (3)	that makes no sense. why dont you read the actual post before you react. you dont say a book is good or bad because you read the title. __________________ Don't forget to tell your mom, she ran out of eggs this morning!

01-28-2009, 12:08 AM	#11
neverrain When it rains, it pours. Join Date: Jun 2008 Location: SoCal 818 Age: 28 Posts: 866 Trader Rating: (7)	projectRDM - Join Date: Dec 2002 Post Count: 11,016 drifter_91 - Join Date: May 2008 Post Count: 78 It's not that we're ganging up on you. It's just that you're stupid. __________________

01-28-2009, 04:22 AM	#18
ericcastro Premium Member Join Date: Sep 2006 Location: meet a giant fish....LIKE A BOSS!! Age: 33 Posts: 3,902 Trader Rating: (4) Rides Gallery: ericcastro	Almost feel bad, so i cant say anything to this poor guy but, ouch. live and learn, read the post mang. __________________ No, its not an SR, its a single cam..........

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

01-27-2009, 11:20 PM	#2
drifter_91 Leaky Injector Join Date: May 2008 Location: chicago Age: 18 Posts: 107 Trader Rating: (2)	this goes to wanted to buy not chat

01-27-2009, 11:31 PM	#4
E Double Premium Member Join Date: Oct 2007 Location: Misawa, Japan Age: 24 Posts: 1,039 Trader Rating: (14)	i have a spare pedal and bracket from a 180SX sitting in my garage that i can check out when i get home if you think it would be the same as your setup

01-27-2009, 11:39 PM	#6
E Double Premium Member Join Date: Oct 2007 Location: Misawa, Japan Age: 24 Posts: 1,039 Trader Rating: (14)	alright ill check it out when i get home

01-28-2009, 02:21 AM	#17
E Double Premium Member Join Date: Oct 2007 Location: Misawa, Japan Age: 24 Posts: 1,039 Trader Rating: (14)	As you can see in this photo the bolt is actually not a normal bolt, kinda caught me off guard when i took it out. the tip of the bolt appears to be a 10x1.25 thread but i am gonna have to take it to the hardware store to check it on one of their little thread blocks. after that i can take the measurements if you still want them, i just have to find my measuring tape. i took this portion of the clutch pedal and slipped it over a lug stud and it was slightly bigger, i want to say that the solid shaft of the bolt is around 13~14mm in diameter. in the photo is a comparison of where the shaft goes through the pedal, the large measurement and where the bolt exits the bracket, the 10mm measurement. if for some reason you cant source one of these bolts you may be able to drill out the small end of the bracket and find a bolt that will fit snug in the pedal and use that. if not i can probably get you one from the parts store here if i just take them my title.

01-28-2009, 07:57 AM	#21
The Chad Zilvia Addict Join Date: Feb 2007 Location: Richmond, VA Age: 28 Posts: 924 Trader Rating: (0)	It really is not every day that projectRDM asks for help...much asks anything haha. And for this NEWB to step in and....arrrrgghhh. You are not worth my time...but thank you PHILIP and other Mods for stepping up and puting random posters in their place. Respect your elders!!! Esp if you want our help later on down the line!!!

01-28-2009, 10:32 AM	#23
fliprayzin240sx SLINKY + ESCULATOR = Fun Times Join Date: Aug 2002 Location: Ass Crack of Japan Posts: 8,413 Trader Rating: (5) Rides Gallery: fliprayzin240sx	Hey Russ, if thats the same bolt im thinking...isnt there a plastic bushing that it slides into on the pedal?!?! Can you just be missing that plastic piece, to get rid of the play? Is that white piece on the pedal a bushing? __________________

01-28-2009, 02:55 PM	#27
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 14,322 Trader Rating: (1)	Do you have all the info now? Cause I have brackets pedals and other parts I can measure. __________________ Comments should be taken as Opinions not as Statements of Fact.

01-28-2009, 03:20 PM	#28
zugoi Zilvia Junkie Join Date: Aug 2003 Location: Bay area Posts: 540 Trader Rating: (0)	please reply drifter_91. I need another giggle. __________________ Drunk posting FTW!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode