The "Identify this" thread - Page 115 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

***S14DB*** · 08-21-2008, 02:52 PM

Consult Plug.

Somnambulist · 08-21-2008, 08:14 PM

What kind of seat is this?

They Almost fit S14 - one bolt hole on seat rail is 1/2" off.

timlush · 08-21-2008, 08:23 PM

What skirts are these?

DaPCWiz · 08-21-2008, 08:32 PM

Quote:

Originally Posted by Somnambulist

What kind of seat is this?

They Almost fit S14 - one bolt hole on seat rail is 1/2" off.

looks like s15 to me.. but I could be wrong?

Somnambulist · 08-21-2008, 08:54 PM

Quote:

Originally Posted by DaPCWiz

looks like s15 to me.. but I could be wrong?

Googled S15 Silvia seats and this is what I found...

They look slightly different.

The red/black ones have a weird flare at the top near the headrest, while the S15 seats don't. Also looks like they have much more side support than the S15s.

ProjNightshade · 08-22-2008, 05:50 AM

Quote:

Originally Posted by timlush

What skirts are these?

vertex or vertex knock off. I'm not sure if it was real or not. The owner of the car was on here, so you could try asking him also.

dirtdiggler666 · 08-23-2008, 01:09 PM

ok this one can be hard with no pic but for s14 drivers side its a blue plug with a bolt in the middle of it, it look like a mini ecu plug. just wanted to know what its for??

**mrmephistopheles** · 08-23-2008, 02:08 PM

Quote:

Originally Posted by dirtdiggler666

ok this one can be hard with no pic but for s14 drivers side its a blue plug with a bolt in the middle of it, it look like a mini ecu plug. just wanted to know what its for??

It's probably the Super Multiple Junction.

***S14DB*** · 08-23-2008, 04:24 PM

Quote:

Originally Posted by mrmephistopheles

It's probably the Super Multiple Junction.

I would say TCU cause it is long and looks like a mini ECU(blue). SMJ is closer to square.

dirtdiggler666 · 08-23-2008, 06:19 PM

ya the plug is blue but if i remember correct the box is silver

ok here is the deal i took out the box to do some work and i fukin lost it, well i plugged everything back in and now my headlights brake light ect dont work but the car cranks?? so i wanna know if the little box is the prob??

if no one can figure it out i will take pics

***S14DB*** · 08-23-2008, 07:12 PM

Quote:

Originally Posted by dirtdiggler666

ya the plug is blue but if i remember correct the box is silver

ok here is the deal i took out the box to do some work and i fukin lost it, well i plugged everything back in and now my headlights brake light ect dont work but the car cranks?? so i wanna know if the little box is the prob??

if no one can figure it out i will take pics

Silver Box hooked up to the blue plug w/Bolt is the TCU.

Black Connector with grey cam lock is the Door/Window/Lights controls. "Smart Entrance Control Unit"

Also the fuse box is down there too...

dirtdiggler666 · 08-24-2008, 05:30 PM

so the tcu has nothing to do with my headlights ect

what is the tcu for?

thanks so much for all the help

devonkyle77 · 08-24-2008, 11:34 PM

where does that pipe go? i am LOST!

thanks in advance!

***S14DB*** · 08-25-2008, 12:17 AM

Quote:

Originally Posted by dirtdiggler666

so the tcu has nothing to do with my headlights ect

what is the tcu for?

thanks so much for all the help

TCU = Transmission Control Unit. For your auto tranny.

Quote:

Originally Posted by devonkyle77

where does that pipe go? i am LOST!

thanks in advance!

Recirc pipe for the BOV.

devonkyle77 · 08-25-2008, 07:49 AM

thanks man, where does the end go that i have the arrow pointed to though?
i will have a fmic in my bay in the next few days, and my bay will be practically complete, and i would like to know what to do with that pipe first!

*s0apgun* · 08-25-2008, 02:52 PM

nitekids aero?

Gavster · 08-25-2008, 04:07 PM

I believe its called "friends" aero, or something like that

*axiomatik* · 08-25-2008, 06:45 PM

that's what i remembered too:

FRIENDS aero??

*s0apgun* · 08-25-2008, 08:59 PM

so which VS copy is it

atom · 08-25-2008, 10:19 PM

VS don't make a copy, thank god.

*s0apgun* · 08-25-2008, 10:38 PM

thats sad

aero is amazing right up there with j-blood

derek_s13 · 08-26-2008, 12:16 AM

Quote:

Originally Posted by devonkyle77

thanks man, where does the end go that i have the arrow pointed to though?
i will have a fmic in my bay in the next few days, and my bay will be practically complete, and i would like to know what to do with that pipe first!

there's a small pipe branching off the coldpipe that fits directly into it.

most aftermarket coldpipes have em on there too.

vindiezel · 08-26-2008, 01:37 AM

Is this a compressor outlet pipe for the S15 turbo? The problem is that the Greddy compressor outlet pipe does not fit. I am assuming it is an for an S15 turbo, but I just need confirmation.. What do you guys think?

Bought this S13 SR20 Redtop from a forum member.. it was an S15 turbo set-up.. then the S15 turbo was parted out and I was given the stock S13 turbo.

-pretty sure the exhaust manifold is Megan.
-Stock T25 turbo bolts up fine, the turbo has not been clocked.
-the person I bought the motor from does not know for certain if it is an S13 or S15 compressor outlet pipe.. I do not have a stock pipe for reference.

First pic shows why it doesn't fit. Second pic shows the only way it fits. If I point it in the opposite direction towards the front, it'll hit the vacuum fitting on the wastegate actuator. TIA!

Ninjabread · 08-26-2008, 10:04 AM

Greddy compressor outlet is meant for people who have a t28 that want to retain stock s13 sr intercooler piping. You're gonna need a stock t25 outlet which is straight (no bend).

socal_kouki · 08-26-2008, 10:44 AM

Quote:

Originally Posted by s0apgun

nitekids aero?

Vanquish GT Front Bumper
Feiz Designs front fender
Masa Motorsports M-tune fender add on
Feiz Designs Side skirts
Aero Palace Rear fender
Msport Vented Carbon Fiber hood

Copied it off his cardomain site.

socal_kouki · 08-26-2008, 10:46 AM

Quote:

Originally Posted by vindiezel

Is this a compressor outlet pipe for the S15 turbo? The problem is that the Greddy compressor outlet pipe does not fit. I am assuming it is an for an S15 turbo, but I just need confirmation.. What do you guys think?

Bought this S13 SR20 Redtop from a forum member.. it was an S15 turbo set-up.. then the S15 turbo was parted out and I was given the stock S13 turbo.

-pretty sure the exhaust manifold is Megan.
-Stock T25 turbo bolts up fine, the turbo has not been clocked.
-the person I bought the motor from does not know for certain if it is an S13 or S15 compressor outlet pipe.. I do not have a stock pipe for reference.

First pic shows why it doesn't fit. Second pic shows the only way it fits. If I point it in the opposite direction towards the front, it'll hit the vacuum fitting on the wastegate actuator. TIA!

You're going to have to have a shop turn your turbo housing a few degrees... make that more than a few degrees.

vindiezel · 08-26-2008, 12:25 PM

The Greddy outlet came with the setup.. If I have the turbo clocked, the wastegate actuator will be out of alignment.. unless there is something I'm missing. Looks like I'll be looking for a stock compressor outlet pipe. Thanks guys!

***S14DB*** · 08-26-2008, 05:24 PM

Quote:

Originally Posted by devonkyle77

thanks man, where does the end go that i have the arrow pointed to though?
i will have a fmic in my bay in the next few days, and my bay will be practically complete, and i would like to know what to do with that pipe first!

The recirc port on the BOV. port for the BOV will be on the cold pipe there.

monk · 08-29-2008, 04:07 AM

what kind of headlights are these on koguchi's car??

-***JOKER***- · 08-29-2008, 04:12 AM

dude those are the supermade ones with a lexan cover on it...the lexan cover which he uses is tinted thats why it looks black...nothing special

08-21-2008, 02:52 PM	#3421
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 18,695 Trader Rating: (2) Feedback Score: 2 reviews	Consult Plug. __________________ Comments should be taken as Opinions not as Statements of Fact.

08-25-2008, 02:52 PM	#3436
s0apgun 世界のドリフト Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,069 Trader Rating: (17) Feedback Score: 17 reviews	nitekids aero? __________________ d-wolrd.co.jp

08-25-2008, 04:07 PM	#3437
Gavster Zilvia Junkie Join Date: Mar 2005 Location: Charleston, SC Age: 27 Posts: 512 Trader Rating: (4) Feedback Score: 4 reviews	I believe its called "friends" aero, or something like that __________________ I <3 burnt metal smell....

08-25-2008, 06:45 PM	#3438
axiomatik Premium Member Join Date: Dec 2003 Location: ATL Posts: 4,748 Trader Rating: (0) Feedback Score: 0 reviews	that's what i remembered too: FRIENDS aero?? __________________

08-25-2008, 08:59 PM	#3439
s0apgun 世界のドリフト Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,069 Trader Rating: (17) Feedback Score: 17 reviews	so which VS copy is it __________________ d-wolrd.co.jp

08-21-2008, 08:14 PM	#3422
Somnambulist Zilvia Junkie Join Date: Jan 2008 Location: Cincinnati, Ohio Posts: 596 Trader Rating: (5) Feedback Score: 5 reviews	What kind of seat is this? They Almost fit S14 - one bolt hole on seat rail is 1/2" off.

08-21-2008, 08:23 PM	#3423
timlush Zilvia FREAK! Join Date: Aug 2005 Location: Louisville, KY Age: 28 Posts: 1,170 Trader Rating: (12) Feedback Score: 12 reviews	What skirts are these?

08-23-2008, 01:09 PM	#3427
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 33 Posts: 2,086 Trader Rating: (26) Feedback Score: 26 reviews	ok this one can be hard with no pic but for s14 drivers side its a blue plug with a bolt in the middle of it, it look like a mini ecu plug. just wanted to know what its for??

08-23-2008, 06:19 PM	#3430
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 33 Posts: 2,086 Trader Rating: (26) Feedback Score: 26 reviews	ya the plug is blue but if i remember correct the box is silver ok here is the deal i took out the box to do some work and i fukin lost it, well i plugged everything back in and now my headlights brake light ect dont work but the car cranks?? so i wanna know if the little box is the prob?? if no one can figure it out i will take pics

08-24-2008, 05:30 PM	#3432
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 33 Posts: 2,086 Trader Rating: (26) Feedback Score: 26 reviews	so the tcu has nothing to do with my headlights ect what is the tcu for? thanks so much for all the help

08-25-2008, 10:19 PM	#3440
atom Zilvia FREAK! Join Date: Jan 2003 Location: San Francisco Posts: 1,182 Trader Rating: (0) Feedback Score: 0 reviews	VS don't make a copy, thank god.

08-25-2008, 10:38 PM	#3441
s0apgun 世界のドリフト Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,069 Trader Rating: (17) Feedback Score: 17 reviews	thats sad aero is amazing right up there with j-blood __________________ d-wolrd.co.jp

08-26-2008, 10:04 AM	#3444
Ninjabread Post Whore! Join Date: Jul 2005 Location: Ottawa, Ontario Age: 24 Posts: 3,520 Trader Rating: (2) Rides Gallery: Ninjabread Feedback Score: 2 reviews	Greddy compressor outlet is meant for people who have a t28 that want to retain stock s13 sr intercooler piping. You're gonna need a stock t25 outlet which is straight (no bend). __________________ 613DriftWerks.ca

08-26-2008, 12:25 PM	#3447
vindiezel Leaky Injector Join Date: Jan 2004 Location: San Diego Age: 28 Posts: 60 Trader Rating: (5) Feedback Score: 5 reviews	The Greddy outlet came with the setup.. If I have the turbo clocked, the wastegate actuator will be out of alignment.. unless there is something I'm missing. Looks like I'll be looking for a stock compressor outlet pipe. Thanks guys!

08-29-2008, 04:07 AM	#3449
monk Leaky Injector Join Date: Feb 2003 Location: 818 Age: 27 Posts: 103 Trader Rating: (3) Feedback Score: 3 reviews	what kind of headlights are these on koguchi's car??

08-29-2008, 04:12 AM	#3450
-*JOKER*- Leaky Injector Join Date: Jun 2008 Location: petrol station Age: 29 Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	dude those are the supermade ones with a lexan cover on it...the lexan cover which he uses is tinted thats why it looks black...nothing special

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/chat/174916-identify-thread.html
Posted By	For	Type	Date	Hits
KCDrift.com • View topic - Pics & Vids Thread	This thread	Refback	04-27-2013 05:43 AM	3
Identifying Alloy Wheel Manufacturer And Model - MR2 Club - Toyota Owners Club - Toyota Forum	This thread	Refback	04-25-2013 06:59 AM	1
S13 Silvia front end conversion? : 240sx	This thread	Refback	11-27-2012 05:56 PM	11
Any redditors in Japan willing to help me out with a small errand? : japan	This thread	Refback	11-05-2012 01:16 AM	94
broadcast	This thread	Refback	10-11-2012 06:08 PM	2
overview for thedezz	This thread	Refback	10-01-2012 12:43 PM	1
Does anyone know what kind of wheels these are? : 240sx	This thread	Refback	09-27-2012 09:03 PM	10
S13 HumanColas Refreshing Crisp Build - 240sxONE Forums	This thread	Refback	06-21-2012 05:27 PM	2
What kit is this?	This thread	Refback	12-03-2011 12:56 PM	21
2012	This thread	Pingback	11-17-2011 11:21 AM	7
?????????? ??????????	This thread	Refback	08-03-2011 08:37 AM	20
Identifying Alloy Wheel Manufacturer And Model - Toyota Owners Club - Toyota Forum	This thread	Refback	06-07-2011 06:53 PM	21
S13 Coupe Rear options - Page 2 - 240sxONE Forums	This thread	Refback	06-05-2011 03:25 PM	140
Hellaflush 8 – Venice Beach \| Canibeat	This thread	Refback	05-22-2011 05:42 PM	1
Toyotafest 2011 (Long Beach, CA) \| Canibeat	This thread	Refback	05-22-2011 02:21 PM	1
Sumospeed Presents: Springfest 2011 (Norfolk, VA) \| Canibeat	This thread	Refback	05-22-2011 08:22 AM	1
Club-S12.org v3.0 - Can you id these wheels?	This thread	Refback	05-17-2011 09:38 AM	25