The "Identify this" thread

[CrimsonRockett]

Originally Posted by Slideways_Kiwi

Looks like standard Kouki aero to me.

Again, it is not Kouki aero.

Pay attention to the details on each valance.

I own both sets pictured and a kouki 3pc rear.

They are not the same thing...

[PoorMans180SX]

I think everyone will like this:

Here's the link for the video of Break's 180SX:
http://www.megavideo.com/?v=HJ1O5AMZ

[s0apgun]

break's 180sx is the definition of awesome, perfect, and sweet

[captainfalco]

Anybody know what size tires are on this?

[chris_g]

wat kind of tail lights are these and were can i get these, im loving them and i wanna get em for my sileighty



http://img.photobucket.com/albums/v3...g?t=1214446193

[OptionZero]

ebay altezza's w/ red spray on tint or film

[chris_g]

http://cgi.ebay.com/ebaymotors/89-94...spagenameZWDVW

like these???

nahh cant be!! not even close

this has 3 holes and they dont stick out but the 1 im lookin for is kinda like the kouki with 2 holes stickin out

[jdizzy204]

i need to know what paint code this is and where i can find it

[OptionZero]

There are many variants of kouki/altezza taillights that appear on ebay. They all come from various taiwanese factories and are rebranded not only by ebayers but also by jdm companies.

Another variant with 2 round pieces:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33716, even if it's not alike

given that what you're looking for is incredibly ugly, i think i'll stop "helping" now

[chris_g]

ohhhhh shit yeah it think those are the one Lol thx for helping they are ugly eww haha

[s13tmont]

what front lip is that and where can i get it?

[smellslikecurry]

damnit thats the 89-90 pignose stock lip

its been asked 100xs in this damn thread

[oneviaman]

can someone id this power fc. was told its for an s13 redtop.
the #'s on the case are pfcsr2014020-1002

[Bomber 570]

Originally Posted by jdizzy204

i need to know what paint code this is and where i can find it

looks like primer gray with clearcoat over it to me. Seriously.

[Bomber 570]

Originally Posted by captainfalco

Anybody know what size tires are on this?

looks like 225/40/18 probably. Looks like Kumho's or Falken's to me.

[S14DB]

Originally Posted by oneviaman

can someone id this power fc. was told its for an s13 redtop.
the #'s on the case are pfcsr2014020-1002

Yeah that's for a redtop.

[Bomber 570]

Originally Posted by oneviaman

can someone id this power fc. was told its for an s13 redtop.
the #'s on the case are pfcsr2014020-1002

its for S13 redtop.

link: http://phase2motorsports.stores.yaho...ipowerfc1.html

first drop down, second option.

[n240sxfnatic]

putting my new motor in i cant remember where this wire goes, any ideas, its thicker gauge? I believe there was a plastic circular piece over the threads?

I also feel like something goes here

[its a kia]

i believe the wire you already have connected to the alt. is supposed to go to that spot you circled, and the connection in question goes where the "already" connected wire is, i have a KA alt. on my sr but the connection locations are pretty much the same

[kaaos]

can i delete all this stuff. i know itll throw codes im just making sure its all evap/egr shit. egr pipe i just welded shut. all from a 98 ka24de manual. already have rear evap stuff removed and throwing codes. and might as well remove the rest, before i swap in this motor. ( also I realize part of the pipes are extenders for the fuel rail feed and return line)


Shot with Canon PowerShot SD1000 at 2008-06-26


Shot with Canon PowerShot SD1000 at 2008-06-26


Shot with Canon PowerShot SD1000 at 2008-06-26

also is there anything wrong with deleting the intake coolant lines? does it actually cool? or will it mess with iat and stock tuning?

[g6civcx]

Don't have pix right now but it's a simple question anyhow.

Megan Track coilover for S13. The toolkit comes with 2 rings that are about the size of thumbrings. Are these the spacers for S14 uprights that people have been requesting?

[BLKS13]

Edit*

zenki can ftw

[s0apgun]

Originally Posted by kaaos

also is there anything wrong with deleting the intake coolant lines? does it actually cool? or will it mess with iat and stock tuning?

check johny5's build thread

he just deleted all iacv and coolant lines for intake

you can adjust the idle at the throttle body

bam

[kaaos]

well i couldnt find his build thread with anything ka24 only a ls1 wish i was asking questions pertaining to a ls1 swap.

also whats this sensor thats broken on top of my ka manual trans

Shot with Canon PowerShot SD1000 at 2008-06-28

[Jordn]

Anyone know what front bumper this is on my PS13? Its pretty trashed now and I wouldn't mind finding another one. Can't find it anywhere though.

[JVD]

Originally Posted by n240sxfnatic

putting my new motor in i cant remember where this wire goes, any ideas, its thicker gauge? I believe there was a plastic circular piece over the threads?

Looks like that is your whole alternator output post. Look beside where the harness clips in(but on the same face as you have the arrow pointing). That's where you'll screw the post back in. Where is the other end connected? Should be directly to the positive battery terminal.

EDIT:

[turbo2nr]

Originally Posted by kaaos

can i delete all this stuff. i know itll throw codes im just making sure its all evap/egr shit. egr pipe i just welded shut. all from a 98 ka24de manual. already have rear evap stuff removed and throwing codes. and might as well remove the rest, before i swap in this motor. ( also I realize part of the pipes are extenders for the fuel rail feed and return line)


Shot with Canon PowerShot SD1000 at 2008-06-26


Shot with Canon PowerShot SD1000 at 2008-06-26


Shot with Canon PowerShot SD1000 at 2008-06-26

also is there anything wrong with deleting the intake coolant lines? does it actually cool? or will it mess with iat and stock tuning?

yes you can get rid of all the obd 2 crap, all u need is fuel pressure and break booster. iacv is optional.

if you want to can get rid of the pvc sys and cooling lines as well, just run the pcv into a catch can.

also make sure you weld all the ports that has not vac. lines to them so you dont have leaks

[WoolyS14DET]

Originally Posted by kaaos

well i couldnt find his build thread with anything ka24 only a ls1 wish i was asking questions pertaining to a ls1 swap.

also whats this sensor thats broken on top of my ka manual trans

Shot with Canon PowerShot SD1000 at 2008-06-28

It's a revoulition sensor. (Crank position sensor)

[WoolyS14DET]

Originally Posted by CrimsonRockett

Anyone?

Kinda bugging me that I don't know.

Look like JDM Nissan parts !!

[kuruptR]

Can you guys do a quick identification on this exhuast system. Thanks