Pic Request Thread, No Photoshops

[gosuS14]

Originally Posted by Full-Lock

revat619's car

Do you happen to know what the size of these rims are? thanks!

[95KA-Turbo]

I want to say 18X10.5 +15 (+10 w/ spacer in the picture) and 18X9.5 +12 (+7 w/ spacer).

[redman]

Hello , I want to buy M2 hanbai NC-10R wheels for my 180sx , in this size :

17x9.5 ET30 4 hole






I want to know if you have pics of their on 180sx ?

Modification to put this wheel on my car (spacers , rolling fender , other...? )

Thanks a lot

[a_ahmed]

18x10.5 +15 enkei rpf01 on s13 front and rear... hopefully 295/30/18 or something :P Cause thats what i wana do... post pix...

[Bushido]

redman,
to run those wheels on the front of your 180sx you're going to need at least a 15mm spacer, so that you don't hit the coilover. It depends on the model coilover you have, but I know that 9.5 +15 will clear Part Shop Max and Stance coilovers.
I run 18x9.5+15 with a 225/40 and I have less than 2mm clearance, about a credit card width.

Megan and K sport and i'm sure some others I have heard will not clear and thus, require a thicker spacer. As for modifications for the front... the usual fender lip rolling, harness relocation, and wheel well hammering is going to be required.

for the rear you should get 15mm spacers as well to make the wheels flush with the body. you'll only need to do a minor 2-3mm pull, without adjustments to camber.

BTW, where are you getting those wheels? multispoke is apparently the 2008 hotness, i'd like a pair.

[sfljdmej2]

Originally Posted by Bushido

BTW, where are you getting those wheels? multispoke is apparently the 2008 hotness, i'd like a pair.

ive seen those on rhdjapan for about 1,200 i think and in bronze or chrome i was thinking of getting them but the offset doesnt really do it for me.

[sfljdmej2]

i wanna see if any of you guys have pics of personal or some one elses s13 coupe with offsets in the low 20`s and 10`s with 17x9 up front and 17x10 in the rear with stretched tires on STOCK SHEET METAL!! rolled and pulled or w/e please help me out with this thanks.

[silviaguy240]

for ^^^. 18x9/10 +0 all around. 215/35-225/40 so what you want will easily fit.

[redman]

Originally Posted by Bushido

redman,
to run those wheels on the front of your 180sx you're going to need at least a 15mm spacer, so that you don't hit the coilover. It depends on the model coilover you have, but I know that 9.5 +15 will clear Part Shop Max and Stance coilovers.
I run 18x9.5+15 with a 225/40 and I have less than 2mm clearance, about a credit card width.

Megan and K sport and i'm sure some others I have heard will not clear and thus, require a thicker spacer. As for modifications for the front... the usual fender lip rolling, harness relocation, and wheel well hammering is going to be required.

for the rear you should get 15mm spacers as well to make the wheels flush with the body. you'll only need to do a minor 2-3mm pull, without adjustments to camber.

BTW, where are you getting those wheels? multispoke is apparently the 2008 hotness, i'd like a pair.

Thanks bushido for your reply , do you think the lip was very important on my front fender or not ?

[smelly240]

i think ksport, d2, megan etc have the slotted hole - they shouldnt hit a +15 at all - but a +30 yeah - that will hit

[Dan14911]

anyone have pics of a purple coupe with gold wheels????

[95KA-Turbo]

Any more pictures of this car or another kouki with this kit? Also any idea what kit it is?

[Taasinboy]

thats the infamous gp sports aero on that black kouki the SEX!

[RedStage]

I've searched google and Zilvia and have not come up with what I am looking for. I've seen some pretty nice custom mounting ideas for the Apex'i PowerFC but was wondering if any S-Chasis people out there have any pics of custom mountings.

Looking for S14, but any will do.

Currently thinking about the almost worthless spot behind the shifter...you know...where there should be a cup holder or something....

Thanks.

[94cc0rd]

Alrite, I've looked through the entire thread and didn't see it. I've seen this car here on zilvia and have not been able to find/remember where I saw it.

It's a black s14 with super wide wheels in the back with a almost porsche-like pull in the rear. No overfenders, no bondo, just expensive professional body work, I think is what the owner said it was... The pull made the car body lines look like newer/higher end cars, (car that comes to mind is the new MB s550).

[95KA-Turbo]

This car?

http://www.zilvia.net/f/showpost.php...postcount=1773

It isn't a pull, they're custom fenders...which would qualify as "expensive professional body work" .

[hotrodv]

Originally Posted by 95KA-Turbo

Any more pictures of this car or another kouki with this kit? Also any idea what kit it is?

http://i107.photobucket.com/albums/m...ang/GGS142.jpg

I've a lot of pics..
gpsports demo



mine







white one

[tougemaster]

Need 180sx Hatch wtih Uras Type 4... i know is alot of them out there but im looking for one with 18" agressive look

[firelizard]

180SX with Supermade all around.
No onevias or conversions please.
I'd like to get a good look at the Supermade for 180SX from all angles, and so far haven't found a satisfactory set of photos.

[tougemaster]

Originally Posted by firelizard

180SX with Supermade all around.
No onevias or conversions please.
I'd like to get a good look at the Supermade for 180SX from all angles, and so far haven't found a satisfactory set of photos.

[2iv0 sx]

Anyone have more pictures of this s13?



Also want picture of clean s13 with complete kouki 180sx front bumper and type x sides

[smelly240]

search koguchi 180sx... geez

*its hotroad but its tittysex with buttsmackies*

[atutt]

anyone have pics of an s14 kouki with shaved bodylines? I'm just curious to see what it looks like.

[94cc0rd]

Originally Posted by 95KA-Turbo

This car?

http://www.zilvia.net/f/showpost.php...postcount=1773

It isn't a pull, they're custom fenders...which would qualify as "expensive professional body work" .

nahh that's not the car i'm thinking off...

the pull i'm talking about is STOCK metal that is pulled out.. looks "muscular"..

[wannabe_drifter]

2iv0 sx: go in the identify this thread there's a really nice one, it's red though it's not 180sx skirt but it is really nice. Either last page or the one before.

I got one more pic of the one you posted



+ another nice one



I might have more 180 sx but cant find them right now, hope you have what you need.

*both of those pictures were taken on zilvia probably on an old picture thread, don't remember from who though.

[tattoo131313]

Originally Posted by 95KA-Turbo

This car?

http://www.zilvia.net/f/showpost.php...postcount=1773

It isn't a pull, they're custom fenders...which would qualify as "expensive professional body work" .

Jeezus that car is pure sex

[2iv0 sx]

Originally Posted by wannabe_drifter

2iv0 sx: go in the identify this thread there's a really nice one, it's red though it's not 180sx skirt but it is really nice. Either last page or the one before.

I got one more pic of the one you posted

http://i123.photobucket.com/albums/o...mg9078svn5.jpg

+ another nice one

http://i123.photobucket.com/albums/o...rjdmbumper.jpg

I might have more 180 sx but cant find them right now, hope you have what you need.

*both of those pictures were taken on zilvia probably on an old picture thread, don't remember from who though.

Dope. Thanks

That's what I wanted to see.

[JRas]

S14 with 17x9 +22 RPF1's

Thanks

[95KA-Turbo]

That'll look bad unless you're running 0 camber and 275s.

[NiSmo240luvR]

Originally Posted by 94cc0rd

Alrite, I've looked through the entire thread and didn't see it. I've seen this car here on zilvia and have not been able to find/remember where I saw it.

It's a black s14 with super wide wheels in the back with a almost porsche-like pull in the rear. No overfenders, no bondo, just expensive professional body work, I think is what the owner said it was... The pull made the car body lines look like newer/higher end cars, (car that comes to mind is the new MB s550).

i think this might be the car you are talking about...







is it?