Maximum TIRE(Rubber) fitment thread

[ZenkiCam]

Dont have pics atm but....

YOUR CHASSIS: s13

WHEELS: 5zigen FN's 17x8 +35 all corners Spaced to +20 (15mm spacers)

TIRES: Goodyear Eagle F1 GS-D3 235/40/17 (all corners)

MISC DETAILS: Footwerks Coilovers 10k F 6k R

ALIGNMENT SPECS: -1.8* Camber F&R .1 Toe front and 0 rear 6.8 Caster

PURPOSE OF CAR: Street, Touge

[black05srt-4]

Got my 315's mounted on my wheels just gotta install my 5 lug swap stuff tomorrow and ill post up pics! Here is a teaser pic tho..

[bshotts]

Looking for suggestions (and yes I've spent countless hours on fitment/max tire threads and even made a fitment spreadsheet) on my next set of possible wheels to go with my 255/35/18 and 275/35/18 FK452s. I originally had 18x10 et+22 and 11.5 et+24 but that was too much stretch and I want to avoid major fender work in front besides a roll (already rolled and pulled in rear).

I've been thinking about SP1s 18x9.5 +22 front and 18x10.5 +30 rears....opinions? That will actually make my front/rear track equal since S14s are naturally 5 mm narrower in rear track. Thanks yall.

[black05srt-4]

Got the passenger rear 5 lug converted and the wheel/tire on. Think im gonna need a 5mm spacer though and yeah i need coilovers asap! Don't mind the primer either it wont be this way for too long.

[xs240]

omg i want

Wheel specs? Size/width/offset?

What about tires other than being 315s...

What about wide fenders? Name brand size etc..

[Adam496]

Did you cut the stock metal when you put those overs on?? If you plan on going low, you are going run into some problems if you didn't.

Getting ready for paint.
Dmax 40mm overs / Hammered flat front fenders
18x9 +12 255/40
18x10 +5 285/30

[black05srt-4]

Wheels are 17x10.5 +27, tires are sumitomo htr z's(cheapest 315 i could find, temp fix till it gets dr's and the motor gets dropped in), overfenders are origin type 2 50mm and yes i did cut the stock metal.

[Adam496]

any pics of the ls6 in?

[black05srt-4]

lol its not in yet, still being built...

[Adam496]

Should be pretty badass when its done

[black05srt-4]

Hope so, a lot of time and money into it haha. Car looks good as well from what i can see man!

[gsracer]

since im gonna become a big time drifter now, i needed some spare drift wheels, i found these for a good price so i picked them up, i need to run like a 10mm spacer to get them to sit flush with the 315 azenis though but whatever

[black05srt-4]

Got the other rear 5 lug and wheel/tire put on, lol it def needs to be lowered that's for sure.

[EndLeSS8]

S14
-1.8" drop with KYB AGX
-1.7 camber all around
Prefer not to roll and remove fender liner cuz of rainy weather here, but will if I have to.

Planning to run 245/40/17 in front on a 17x9 +17 offset

Will I need a roll/remove fender lining?

[240sxScores]

Originally Posted by EndLeSS8

S14
-1.8" drop with KYB AGX
-1.7 camber all around
Prefer not to roll and remove fender liner cuz of rainy weather here, but will if I have to.

Planning to run 245/40/17 in front on a 17x9 +17 offset

Will I need a roll/remove fender lining?

Yes you will probably have to pull out the fender liner and at least hammer the fender lip on the inside flat, with decent pull.

[godzillarb]

Originally Posted by black05srt-4

Got the passenger rear 5 lug converted and the wheel/tire on. Think im gonna need a 5mm spacer though and yeah i need coilovers asap! Don't mind the primer either it wont be this way for too long.

sumitomo htr? Shittiest tires ever. I spun those bastards at 100mph+

[SuicidnS13]

Originally Posted by gsracer

since im gonna become a big time drifter now, i needed some spare drift wheels, i found these for a good price so i picked them up, i need to run like a 10mm spacer to get them to sit flush with the 315 azenis though but whatever

You are joking about the big time drifter thing right?

[black05srt-4]

Originally Posted by godzillarb

sumitomo htr? Shittiest tires ever. I spun those bastards at 100mph+

haha yeah they are a cheap fix till the motor goes in and dr's are needed.

[EndLeSS8]

Originally Posted by 240sxScores

Yes you will probably have to pull out the fender liner and at least hammer the fender lip on the inside flat, with decent pull.

Any pics of what it would look like? I searched a lot, but I've only found S14s with aftermarket overfenders running 245/40/17 on 17x9 +17

[KoukiMonsta]

Originally Posted by SuicidnS13

You are joking about the big time drifter thing right?

i fuking hope so..........

[s13 @ fullboost]

Oh god not another big time drifter hahah

[gsracer]

big time yea, lol, no just having fun with the car, in everyway possible, drift drag road racing w/e

The bottom line is im not sponsored by falken and drifting on 315 azenis is too damned expensive so heres some pics

Got some tires mounted , 275/35/18 azenis st115s, unfortunatly its pretty stretched on this wheel, ill need more spacers.... I know ..... I fail...

[smelly240]

Originally Posted by EndLeSS8

Any pics of what it would look like? I searched a lot, but I've only found S14s with aftermarket overfenders running 245/40/17 on 17x9 +17

I have 245-40-17 on a 9.5 +8 with 20mm (s13)

i can take a pic if u'd like

[xs240]

i would like to start a new trend... drifting with 315s, 335s, 355s, lmao... sponsor me now.

[gsracer]

i almosot put 335s on it

[moedigzz]

could I fit 18x9+20 and 18x10+18 with 255/40's and 275/35's on a s13? Sorry, I'm a noob with fitment.

[EndLeSS8]

S14
-1.8" drop all around
17x9 +17 offset front
18x9.5 +12 offset rear
-1.7 degrees camber all around

Will a 225/45/17 stretch on a 17x9 for FRONT and 255/35/18 for a 18x9.5 REAR look normal?

Which REAR tire size will look the most normal/good with a 225/45/17 on 17x9 front stretch?

255/35/18?
235/40/18 stretch?
245/40/18?

Any thoughts/pictures/advice would be really appreciated. Thanks in advance.

[kingkilburn]

/\ Wrong thread./\

Try this one.
Wheel fitment whore thread (Stretch/Flush)

[murda-c]

Does anyone know if a 255/40/17F 275/40/17R will fit with my stock shocks on some 17x9 +28s?

a friend of mine is selling me his mustang wheels and i want to know if they'll fit before i am able to get coilovers and spacers.

Also will they fit with stance coilovers?

I tried to search and i couldn't find anyone with the same tire size and offset with stock shocks.

I'm only using the tires because i'm getting a good deal on them, lol.

[longfellow]

NT05s YAY