Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[ross.cottrill]

18x9+16(225-40),18x10+11(225-40) SHITTY PICS!!!


[I[IMG]http://pic20.picturetrail.com/VOL1390/11141261/19768696/319655851

[Eyemfaster]

18x9.5 +20 235/40/18
18x10.5 +20 275/35/18

stance coils, stock arms

[Marcus]

Originally Posted by got boost??

looks sick! more pics(from front/driver side if possible please)

new fronts 17x10+5 (+25w/20mil spacer) 225/35 roll/pull/slam

[Ninjabread]

What the fuck are you doing in this thread?

[usdm180sx]

Originally Posted by Mikey213

my cars to flush should i raise it more? keekkeekee

You shouldn't have even posted it:

17x9 +16 17x10 +18

[GabeS14]

Originally Posted by ross.cottrill

18x9+16(225-40),18x10+11(225-40) SHITTY PICS!!!

Your car is pure sickness!

[cxlo8331]

Originally Posted by Mikey213

my cars to flush should i raise it more? keekkeekee

The S14:
Front:18x9 +16 w. 225/40/18 Rear 18x10 +19 w/ 235/40/18



The S13
Front: 17x8 +5 w/ 205/40/17 Rear 17x9 +11 w/ 215/40/17

[gsxr141]

please don't flame me i'm a newbie. i have a 89 coupe with 2 inch lower springs. just bought 17x7 and 17x9 sportmax wheels. i have a 215 45 17 in front. my question is should i go with a 235 40 17 or a 255 40 17 in back. the wheels are 35 offset. i just need some expert advice on what will fit.
thanks.............

[GabeS14]

Originally Posted by gsxr141

please don't flame me i'm a newbie. i have a 89 coupe with 2 inch lower springs. just bought 17x7 and 17x9 sportmax wheels. i have a 215 45 17 in front. my question is should i go with a 235 40 17 or a 255 40 17 in back. the wheels are 35 offset. i just need some expert advice on what will fit.
thanks.............

I would prefer 205;'s in the back, and a spacer (if needed)for flushness
but then, when thinking about the front wheels it wouldnt look good to stretch such small tires since you are running a size 7" up front...
so maybe a 225 or 235 in rear would be better and you could still get a bigger tire fro front to make it fit /look better.and def..a big spacer in the front!!!

[newborn240]

Originally Posted by Zilvia4eva

thanks bro....but I like the koukie sides w/jdm koukie rear bumper + valence.Now time for a greedy lip or a custom fitted 996TT front lip.

wat kinda rims r those on that black S14? meisters?

[jookybanana]

not a nissan, but i think its pretty sick fitment

17x9.5 +24, 225/45

[importantone]

Subies are starting to take Q's from the 240 crowd.

This is mine...

18x8.5 SSR GT2's +23 with 225/40 tires

All fenders rolled and the rears are pulled a bit. Camber -2

I've done a little more pulling and lowered the car about 3/4inch more since these pics.

[qt_240]

Heres a shot someone else took of my car.. i thought it was pretty dope..

[Quail]

Hey guys, I think this is the right place to post this.

Im buying some 3piece Work Meister S1s on Thursday. The rears are 18x10 et0, which isn't a problem as I've already had my rear arches done. My question is about the fronts. They're 17x9 et0.

Anyone know what kind of tyre sizes I'd need to fit these under the standard front fenders? I don't mind a bit of archwork. Will this be possible?

[Marcus]

yea its possible. 205 or 215 40s. with roll and slight pull. smash everything inside wheel well.

[murda-c]

Originally Posted by qt_240

Heres a shot someone else took of my car.. i thought it was pretty dope..

your paint makes baby jesus cry, but your fitment makes the angels sing, so it's win.

[Quail]

Originally Posted by Marcus

yea its possible. 205 or 215 40s. with roll and slight pull. smash everything inside wheel well.

Thanks bro +rep

[PITCH]

Originally Posted by NismoKidd

[FLICKR]http://farm3.static.flickr.com/2105/2453570771_a6144f0867_o.jpg[/FLICKR]

[FLICKR]http://farm3.static.flickr.com/2140/2453570723_2ba165178e_o.jpg[/FLICKR]

Work Maximer
18x9 235/40

Repped+

[dorkidori_s13]

Originally Posted by Quail

Hey guys, I think this is the right place to post this.

Im buying some 3piece Work Meister S1s on Thursday. The rears are 18x10 et0, which isn't a problem as I've already had my rear arches done. My question is about the fronts. They're 17x9 et0.

Anyone know what kind of tyre sizes I'd need to fit these under the standard front fenders? I don't mind a bit of archwork. Will this be possible?

max camber on 225/45/R17 and ull be fine with a roll on a S14 (u guys get more camber in your cars than us S13 guys do)

[Quail]

Originally Posted by dorkidori_s13

max camber on 225/45/R17 and ull be fine with a roll on a S14 (u guys get more camber in your cars than us S13 guys do)

Just realised I put 17x9, I actually meant 18x9 et0. Thanks for the reply though. Same applies with 225/40/18?

[Full-Lock]

for sure do a 225/40 on the front

[slideitsideways]

clearer pic or my set up

yeh, pretty queer

[Quail]

Originally Posted by Full-Lock

for sure do a 225/40 on the front

Good stuff . Stay tuned for pics

[95KA-Turbo]

Originally Posted by Quail

Good stuff . Stay tuned for pics

I'm running a 17X9 +3 up front with a 215/45, I want to say my camber is ~-2.5...just a FYI:



It could go lower...or I could run a slightly larger tire front and back, but that is what it sits like now and I have no rubbing issues. I hammered the front fenders, so nothing major.



DERR, I just saw you said 18! 225/40 definitely!

[k-os]

picking up a set of sportmaxx wheels 16 x 8 0 offset
would 195/50/16's be the size to go with for a nice stretch on them?
anybody recommend something else?

and rules i added a pic of my car and its current setup
17 x 9 Fn's
+12 offset all around (originally +20 but i added 8mm spacers all around so i could clear front coilovers)
235/40/17 federals

[upSLIDEdown]

Originally Posted by Quail

Hey guys, I think this is the right place to post this.

Im buying some 3piece Work Meister S1s on Thursday. The rears are 18x10 et0, which isn't a problem as I've already had my rear arches done. My question is about the fronts. They're 18x9 et0.

Anyone know what kind of tyre sizes I'd need to fit these under the standard front fenders? I don't mind a bit of archwork. Will this be possible?

Depends on how low you're going. I'm running an 18x9 +5 up front on my S13 and I'm lower than most. I rubbed with a 225/40 directly over the front tires. I went to a 225/35 and don't rub at all, even with the coils 5 threads lower than before. I think this next time I MIGHT go to a 215/40. The 35 sidewall is a little short for my taste.

[Quail]

Originally Posted by upSLIDEdown

Depends on how low you're going. I'm running an 18x9 +5 up front on my S13 and I'm lower than most. I rubbed with a 225/40 directly over the front tires. I went to a 225/35 and don't rub at all, even with the coils 5 threads lower than before. I think this next time I MIGHT go to a 215/40. The 35 sidewall is a little short for my taste.

Thanks for the personal experience mate. Im grabbing free 225/40s off a friend, so I'll mount them with the hairspray trick. If they don't fit, I'll just swap them over for some 215/40s. Tbh, my car isn't as low as it should be atm. I'm trying to save for Teins

[240trainee]

I love 215/40 on a 17 for sure, lets me do this with minimal trouble



Only thing is, gotta be careful with your fenders, I folded one in under compression.

[Ninjabread]

hahaha.... dunno if that's what happened to mine but one of them has a fist size inwards dent. Maybe the start of the fender folding itself.



There was a shit ton of rubber on my hood, fender, mirror, door and windshield haha.

[Doriftogasm]

Originally Posted by murda-c

your paint makes baby jesus cry, but your fitment makes the angels sing, so it's win.

Fortunately for us, we dont really care