Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 112 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RPS13-604 · 02-21-2009, 03:50 AM

Quote:

Originally Posted by Matej

Everyone's city is always the worst.

yes thats true but sometimes is just ridicoulsly low that you cant even drive it anymore nor streetable that just my opinion

*Fries* · 02-21-2009, 05:39 AM

Quote:

Originally Posted by Matej

Everyone's city is always the worst.

Its true.
Any of you that think youcan't go low in your city without fucking shit up talk to Matej. I've lived in KC and I can tell you.

-I would really like to pick up another 9.5 for the front, but I got 2x 8.5s with brandnew tires for $400 so I couldnt pass up the deal.

I need to raise it about a inch in order for it to be driveable with those tires hahaha! Rubrubrubrubrub without even hitting a dip.

Too much fun. <3
Spacers and new tires coming soon.

Enna · 02-21-2009, 07:36 AM

I was gonna say, those rim gaps look almost as bad as your avatar lol.

khilgers · 02-21-2009, 07:48 AM

just got the car lowered another 1", rear fenders pulled and I need to space the front out about 15MM and I'll be happy.

*TheRonTom31* · 02-21-2009, 07:53 AM

Quote:

Originally Posted by Matej

Everyone's city is always the worst.

Actually my city is pretty good. Tons of rich people here so there are a few parking areas/structures designed to allow ferrari and lamborghini access

Chernobyl · 02-21-2009, 10:34 AM

Quote:

Originally Posted by awFilms

Great fitment on this Subi. Please post specs.

TheTimanator · 02-21-2009, 11:20 AM

RIMTUCK.com - Search Results

17x8.5 +20 205/40 all around.

ayuaddict · 02-21-2009, 01:23 PM

this is just for reference.

i have since sold the wheels.

taken off my friend's blog.

F: 17x9.5 +15 (205/40/17) S14 LCA, KTS max camber.

R: 17x10.5 +19 (225/45/17) -4.5 degrees camber-ish.

*jimmytango00* · 02-21-2009, 09:43 PM

finally finished fitting most of the kit , im satisfied with the stance, still needs alignment and some camber in the rear (very little)

SlideAlliance · 02-21-2009, 10:29 PM

Rivet your fenders down after you set the toe and camber and ride height. I made that mistake on my car and put like thirty holes instead of the 8 that I needed.

And to be perfectly honest, I would set your car lower than you plan on running it when you set the fenders so you know where it will clear when it squats

GabeS14 · 02-22-2009, 11:10 PM

Quote:

Originally Posted by SlideAlliance

Rivet your fenders down after you set the toe and camber and ride height. I made that mistake on my car and put like thirty holes instead of the 8 that I needed.

And to be perfectly honest, I would set your car lower than you plan on running it when you set the fenders so you know where it will clear when it squats

Thats a smart piece of advice right there!!
and jimmytango. i didn't notice it tonight when i was there, since it was dark, but the car is looking great!

supreme_1 · 02-23-2009, 12:15 AM

a friend of mine is selling a set of 19x8, 19x8.5s for a deal, so i wanted to know if they would fit.

i tried searching these threads for a bit but havent seen many cars with 19's
would these rims work fit with a pull, roll, or spacers?

19x8 +35
19x8.5 +30

89 s13, rolled fenders as of now

SoCal-s130 · 02-23-2009, 12:17 AM

Yeah you'd need a roll. with 40mm spacers.

supreme_1 · 02-23-2009, 12:21 AM

Quote:

Originally Posted by SoCal-s130

Yeah you'd need a roll. with 40mm spacers.

is the spacers for the front or rear?

a subtle roll or crazy roll?

SoCal-s130 · 02-23-2009, 12:23 AM

Both front and rear. +35 and 30 is going to be ridiculously sunken.

supreme_1 · 02-23-2009, 12:36 AM

yup it is, thx for the info. im going to mock it up this weekend, so i'll get some pics to help others out

cc4usmc · 02-23-2009, 12:38 AM

Yes, because it is sooo hard to figure out.

Yes... that was sarcasm.

supreme_1 · 02-23-2009, 12:54 AM

Quote:

Originally Posted by cc4usmc

Yes, because it is sooo hard to figure out.

Yes... that was sarcasm.

was this in reference to my question?

AznDrftr. · 02-23-2009, 01:35 AM

*mothon* · 02-23-2009, 03:40 PM

endura-tech coilovers, 18x9.5 +12,225/40 feddys, and too much camber.

Quote:

Originally Posted by mr_240sx

that doesnt look like 225 45 18 to me.

sorry fixed.

mr_240sx · 02-23-2009, 04:56 PM

that doesnt look like 225 45 18 to me.

RaVeNouS14 · 02-23-2009, 08:57 PM

Quote:

Originally Posted by khilgers

just got the car lowered another 1", rear fenders pulled and I need to space the front out about 15MM and I'll be happy.

specs on your wheel/tire size/spacers if used. thx

CrazyIvan · 02-23-2009, 09:10 PM

Quote:

Originally Posted by AznDrftr.

Car's looking good, but IMO it nees more camber/fender work, it looks a bit mexican rite now.

Edit: also why the huge gap between the hood and bumper??

brainfood · 02-23-2009, 09:17 PM

18x10 -8
18x12 -25

SlideAlliance · 02-23-2009, 10:17 PM

One more before final paint. Shit gives me a fucking hard on

*Z33dori* · 02-23-2009, 11:18 PM

my god that is fucking sick...

Bubbles · 02-23-2009, 11:20 PM

Quote:

Originally Posted by SlideAlliance

One more before final paint.

Don't worry about it, I'm cumming over and laying down a thick coat of pearl white all over that thing.

LongGrain · 02-23-2009, 11:34 PM

thats creepy..

SlideAlliance · 02-23-2009, 11:40 PM

That sounds hot.....I wonder if I could clear over that

Bubbles · 02-24-2009, 12:01 AM

Quote:

Originally Posted by SlideAlliance

That sounds hot.....I wonder if I could clear over that

I'm not sure if this is innuendo or not but either way it sounds funny.

02-21-2009, 11:20 AM	#3337
TheTimanator Post Whore! Join Date: Apr 2002 Location: Nashville Age: 26 Posts: 2,538 Trader Rating: (1) Rides Gallery: TheTimanator	RIMTUCK.com - Search Results 17x8.5 +20 205/40 all around. __________________ 89 S13 hatch/////98 Subaru 2.5RS

02-21-2009, 01:23 PM	#3338
ayuaddict Post Whore! Join Date: Jan 2006 Location: San Jose, CA Age: 21 Posts: 2,757 Trader Rating: (1)	this is just for reference. i have since sold the wheels. taken off my friend's blog. F: 17x9.5 +15 (205/40/17) S14 LCA, KTS max camber. R: 17x10.5 +19 (225/45/17) -4.5 degrees camber-ish. __________________ yutaakaishi.com

02-21-2009, 10:29 PM	#3340
SlideAlliance Zilvia Junkie Join Date: Aug 2007 Location: Newport Posts: 500 Trader Rating: (0)	Rivet your fenders down after you set the toe and camber and ride height. I made that mistake on my car and put like thirty holes instead of the 8 that I needed. And to be perfectly honest, I would set your car lower than you plan on running it when you set the fenders so you know where it will clear when it squats __________________ I rip it hardcore like porno flick bitches

02-23-2009, 12:17 AM	#3343
SoCal-s130 Zilvia FREAK! Join Date: Mar 2007 Location: chino hills Posts: 1,456 Trader Rating: (1)	Yeah you'd need a roll. with 40mm spacers. __________________

02-23-2009, 12:23 AM	#3345
SoCal-s130 Zilvia FREAK! Join Date: Mar 2007 Location: chino hills Posts: 1,456 Trader Rating: (1)	Both front and rear. +35 and 30 is going to be ridiculously sunken. __________________

02-21-2009, 07:48 AM	#3334
khilgers Zilvia Addict Join Date: Oct 2005 Location: Twin Cities Age: 29 Posts: 865 Trader Rating: (0) Rides Gallery: khilgers	just got the car lowered another 1", rear fenders pulled and I need to space the front out about 15MM and I'll be happy.

02-21-2009, 09:43 PM	#3339
jimmytango00 Premium Member Join Date: Jan 2006 Location: Los Angeles, CA Age: 25 Posts: 1,951 Trader Rating: (11)	finally finished fitting most of the kit , im satisfied with the stance, still needs alignment and some camber in the rear (very little)

02-23-2009, 12:15 AM	#3342
supreme_1 Zilvia Member Join Date: Sep 2007 Location: hawaii Posts: 240 Trader Rating: (1)	a friend of mine is selling a set of 19x8, 19x8.5s for a deal, so i wanted to know if they would fit. i tried searching these threads for a bit but havent seen many cars with 19's would these rims work fit with a pull, roll, or spacers? 19x8 +35 19x8.5 +30 89 s13, rolled fenders as of now

02-23-2009, 12:36 AM	#3346
supreme_1 Zilvia Member Join Date: Sep 2007 Location: hawaii Posts: 240 Trader Rating: (1)	yup it is, thx for the info. im going to mock it up this weekend, so i'll get some pics to help others out

02-23-2009, 12:38 AM	#3347
cc4usmc Post Whore! Join Date: Dec 2005 Location: Elk Grove/the916/95758/NorCal Posts: 3,682 Trader Rating: (17) Rides Gallery: cc4usmc	Yes, because it is sooo hard to figure out. Yes... that was sarcasm. __________________ "No free man shall ever be debarred the use of arms. The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government" -Thomas Jefferson

02-23-2009, 01:35 AM	#3349
AznDrftr. BANNED Join Date: Apr 2006 Location: 254 \| Texas. Age: 23 Posts: 2,294 Trader Rating: (3) Rides Gallery: AznDrftr.

02-23-2009, 04:56 PM	#3351
mr_240sx Post Whore! Join Date: Nov 2004 Location: Ottawa Age: 23 Posts: 6,521 Trader Rating: (4) Rides Gallery: mr_240sx	that doesnt look like 225 45 18 to me. __________________ regular membership sucks!

02-23-2009, 09:17 PM	#3354
brainfood Nissanaholic! Join Date: Jun 2004 Location: Eagle Rock, CA Age: 27 Posts: 2,115 Trader Rating: (7)	18x10 -8 18x12 -25 __________________ Bryan Rogers http://www.seriousbadass.com

02-23-2009, 10:17 PM	#3355
SlideAlliance Zilvia Junkie Join Date: Aug 2007 Location: Newport Posts: 500 Trader Rating: (0)	One more before final paint. Shit gives me a fucking hard on __________________ I rip it hardcore like porno flick bitches

02-23-2009, 11:34 PM	#3358
LongGrain Post Whore! Join Date: Sep 2006 Location: Midwest Posts: 2,647 Trader Rating: (3)	thats creepy.. __________________ D*squad!

02-23-2009, 11:40 PM	#3359
SlideAlliance Zilvia Junkie Join Date: Aug 2007 Location: Newport Posts: 500 Trader Rating: (0)	That sounds hot.....I wonder if I could clear over that __________________ I rip it hardcore like porno flick bitches

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode