Wheel fitment whore thread (Stretch/Flush)

[EJ253]

front:
17x8 -6 offset 2* camber
225/45/17 Falken Azenis RT615

rear:
17x9 -3 offset 1.5* camber
225/45/17 Falken Zeix ZE512



im going lower soon.
then ill have more camber

[marveluz]

mini-me sizing

16x7.5 +3
f: 205/50/16 fk452
r: 225/50/16 st115

[adrians_s13]

ssr sp1 professors
17x8/9 +24
added 10mm spacers all around

[luisgonz]

[khilgers]

better pic

18x9.5 +12
235/40/18 all around
stock metal, roll all around

[eds13]

[1Via!]

If youre going to post pics of your wheels, fuckin post the sizing of the wheels and tires. Its utterly pointless to post in this thread otherwise.

And, my bit.

17x9 +15 (effective offset +5 with S14 FLCA)
Hankook RS2 235/40-17
-3 camber

Rear
18x9.5 +12
Bridgestone SO-3 Pole Position 235/40-18
-1.5 camber

Stock fenders, slight roll in rear.











Thanks go to Mr. Logan at Aspec for the wheels.

Thank you for your time.

[eds13]

18x9+5 and 18x10+13 with a some camber (dont know how much) i need a fender roller wicked bad. lol

[ThatGuy]

Useless crap deleted. Post pics and specs or don't post.

[silviaguy240]

18x10 +15..completely stock

[Project3328]

chargespeed f 30mm and r 50mm

work equip
f= 18x10 -7 (225/40/18)
r= 18x11 -21 (245/40/18)

If u wanna be a gangsta, but ur on a budget.. hit up Felix @ rb motoring www.rbmotoring.com

[kiki-rs13]

Front: 9x17 ET12 with 225/45 17

Rear: 9,5x18 ET20 with 235/40 18

Some Pictures

[mechanikid]

17x8+12
17x9+20
255/40/17 advan neova all around
(+15mm spacers used)

[usdm180sx]

Work Equips 17x9 +15 (High disk, clears z32 brakes) 215/45-17 and 17x10 +18 (Low disk,phattest lip) 235/40-17

[Flybert]

Originally Posted by usdmsilvia

Cheya boiii! Work Equpis 17x9 +15 (High disk, clears z32 brakes) 215/45-17 and 17x10 +18 (Low disk,phattest lip) 235/40-17

Who refinished your lips? It looks like they grinded down the taper on them? And work never made those sizes. Closest you can get to that is 17x9 +18 high disk (58mm lips) and 17x10 +22 standard disk (70mm lips). Work never made a low disk for the 17" wheels. The only way you can make a 17x10 +18 is with a high disk and 70mm lips.

Still looks great BTW. I have 17x9 +18 high disk FRONT 235/40/17 595 but I have 17x10 +35 standard disk REAR 245/40/17 595. Still has good lip but I want more. My friend on the right has 17x8 +22 front standard disk 215/45/17 595 and 17x9 +22 rear standard disk 215/45/17 595. Same front and rear lips as mine.

[usdm180sx]

Thanks! I picked them up from RB Motoring. Heads up, they have such a big inventory of work barrels that they can now make Equips to order. I asked them if they could make 17x9 +15ish and 17x10 +20ish and this is what they came up with. I got them for $1500 repainted and refinished.

[genetic]

sweeet equips norm

heres mine



17x9-5,17x9-10

[abdul1]

Custom made HRE wheels C21

front 18x9 ET18 235/40/18

rear 18x10.5 ET17 275/35/18

[abdul1]

Custom made HRE wheels C21

front 18x9 ET18 235/40/18

rear 18x10.5 ET17 275/35/18

[AutoRnD]

S14 Kouki - Daily Driver (Client of ours)

Standard FENDER ROLL, NO PULL

Origin
Stance Sport: 25 1/8" Ground to Center of Fender
-2.5 Front -2.0 Rear, 0 Toe

Meister S1 3 Piece BBF Finish
19x9.5 +12 235/35/19
19x10.5 +23 265/30/19
NO RUBS!!!!!!!







Rishie

[JSpecBnr32]

30mm front fenders, 50mm rears
F=18x10 -8, +12(with 20mm spacer) 215/40/18
R=18x12 -7 255/35/18

[Slip&Sliden 240]

Originally Posted by JSpecBnr32

30mm front fenders, 50mm rears
F=18x10 -8, +12(with 20mm spacer) 215/40/18
R=18x12 -7 255/35/18

wouldn't that make the front wheels a 18x10 -28 since the 20mm spacer is moving the wheel out?

[jeeper_x]

Originally Posted by Slip&Sliden 240

wouldn't that make the front wheels a 18x10 -28 since the 20mm spacer is moving the wheel out?

it's normally +12, so 20mm spacer will make it -8.....

[usdm180sx]

18x10 +12 w/ 20mm spacer makes the offset -8. You fail at math haha

[240sxdriftin]

well i've not posted yet much on this forum, but i just got new wheels so i will share!

advan racing oni's 16x8 with a 0 offset tires are 205/45/16
and my old wheels up front 15x6 with a 10 offset tires a 205/50/15

[jimmytango00]

18x9 +9 and 18x10+5

[Slip&Sliden 240]

Originally Posted by usdmsilvia

18x10 +12 w/ 20mm spacer makes the offset +12. You fail at math haha

You fail at common sense. Mathmatically -8+20=12, but when you take off set calculations into perspective if a wheel has a offset of +12mm and you space the wheel out 20mm then you are moving the center of the wheel 20mm farther from the hub. Which would make that a -20mm so (+12) + (-20)= -8.

My first post i missread. I thought the wheels were a -8 with a 20mm spacer, not +12 with a 20mm spacer. But if it was -8 with a 20mm spacer then it would be (-8) + (-20) = -28

[FaLKoN240]

Originally Posted by Slip&Sliden 240

You fail at common sense. Mathmatically -8+20=12, but when you take off set calculations into perspective if a wheel has a offset of +12mm and you space the wheel out 20mm then you are moving the center of the wheel 20mm farther from the hub. Which would make that a -20mm so (+12) + (-20)= -8.

My first post i missread. I thought the wheels were a -8 with a 20mm spacer, not +12 with a 20mm spacer. But if it was -8 with a 20mm spacer then it would be (-8) + (-20) = -28

The wheels are spaced effectively to -8 because the offset was originally +12.

12 - 20 = -8

[Slip&Sliden 240]

Originally Posted by 240FaLKoN

The wheels are spaced effectively to -8 because the offset was originally +12.

12 - 20 = -8

I understand that. Read my post I said that I read it wrong, I said it was -8. I cleary stated how I thought he was saying they where +12 after the spacer, and I corected my self.

[usdm180sx]

Haha I typed in +12 but I meant to type in -8. In any case I replied to your post because it was incorrect. So I guess I fail at typing? And so do you.