Wheel fitment whore thread (Stretch/Flush)

[SoSideways]

Originally Posted by drifterRS

i know this is really retarded for me to ask but does anybody have pics of a s13 fb with sportmax 504 on it? flame as u must but i just want to see them

Try the pic request thread man. This isn't the place to ask that.

[sultan]

Originally Posted by yokotas13

lol
hey sultan, are theose the emitz you got from me?
i should haev kept them

nah, got 18x11 18x12 from you. probably gonna use the 11's as spare rears

Originally Posted by axiomatik

where are your brakes? Is that part of the wheel design?

my brakes are where they have always been, can't see them with the wheels on.

[SW20Racer]

pic request thread man

[SleepyS-14]

18x9.5 +12 w/ 235/40

This is off the ground too.

[swpdwgn]

damn. still tuckin when in the air.

[Nismo240R]

Damn sleepy thats tight

[ZenkitonS14]

Originally Posted by SleepyS-14

18x9.5 +12 w/ 235/40

This is off the ground too.

Lets see some pix on the ground! Is your 1/4 panel just holding the wheel up?
To be that low and have that little of camber when its in the air you must not have stock alignment parts right??? When my car was up in the air I still had like -3 degrees of rear camber on all stock arms and rods

[SleepyS-14]

Alignment:

Camber: -3
Toe: 0

I cut the inside of the quarter panel flush and I just need a very small pull to get the camber back to -2. Silk road coils, powertrix arms. Legit.





On the ground

[FaLKoN240]

Is that the white work finish? Or aftermarket?

I wish my emos were white

[hitman]

dang i woulda thought it would have gone alot lower than that on the ground. anyways nice

[Sliders562]

i like that drop on that s14 + + + +

[Sliders562]

or.........

[timlush]

Someone stolez your caliper!!!1

[DavidC]

sleepy - how extended are your ruca's?

[worr20]

I hope I make it

[Johny5]

haha hey those are my old cr kai! not work finish, either reflective white powdercoated pair or ppg lexus es300 pearl white pair.

[SleepyS-14]

Haha, yes they are.

[pdx_s14]

18x8.5f and 18x9.5r

[mr_240sx]

17x10.5 +27 with 6.5 mm spacers so +20.5
with 255/40/17

[1Via!]

Originally Posted by Risu2112

My thumb at the first joint isn't even 20mm(my pinky being around half that), you might want to go back and remeasure that gap.. looks way too close even with rock hard suspension to not rub, spacers imo. :P

Right, cause your wheels move around so much once you have them secured to the hub...

[firelizard]

How's this?

17x8.5 +19 on 98 Protege

Just waiting for tires now.

[qt_240]

Work Eurolines 18x10 (-6), 18x12 (-7)



What tire sizing do you guys suggest? I was thinking 245/40/18 for the front and the rear maybe a 285 or 295.. Or do you guys think that would be to0 much and I should go with a 265 or 275? I have a 50mm Origin v.II over fender as well. Any help would be appreciated =)

[916S14]

my old car. 15x9 -25 work equips

[KiDyNomiTe]

Originally Posted by qt_240

Work Eurolines 18x10 (-6), 18x12 (-7)



What tire sizing do you guys suggest? I was thinking 245/40/18 for the front and the rear maybe a 285 or 295.. Or do you guys think that would be to0 much and I should go with a 265 or 275? I have a 50mm Origin v.II over fender as well. Any help would be appreciated =)

for front 245/35 or 255/35 245/40 is too tall

rear 275/35 or 265

[motegineon]

whorin a lil more

17x9 -1 225/45/17

[SlideAlliance]

Altstadt 18x11 -7 and 18x12 -7 on widebody FC. Ignore the lack of front fenderness, they are supposed to show up tomorrow

[racepar1]

17x9 +20 offset with 255/40/17 azenis. -2.8 camber front -2.2 camber rear. Rolled/pulled front and rear fenders.

Rear clearance.

[ALEXTHESUS*PECT]

[Matej]

Originally Posted by mr_240sx

Whoa what are those wheels, Watanabe Cyclones? Whatever they are they look interesting, pretty cool.

[Leetheslacker]

they look like the ebay mustang fr500 whatever knockoffs.