CA Fs/ft 1993 widebody rx7 project car - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

fdinfinirx7 · 10-26-2009, 04:10 AM

Its time for me to let go of my 1993 mazda rx7 after 3 1/2 years.

Located in long beach CA 90813
No Shipping

The car is a clean title but hasn't been registered since june of 2006 which was when i purchased it. Theres alot of reason why im selling it 1) I lost my job so i can't aford to finish the project 2) I need a working car so i could go back to school 3) This isn't a car that 18 year old needs right now.

My original plan for the car was to make it a track car. So i stripped everything under the interior meaning if you were to look under the interior there won't be any thing there but the chassis. Theres no AC or power steering and all the emmision related item were removed.

The motor runs and i bought the block rebuilt and was told it has under 1000 miles. This is a project car so everything is disconnected so i can't start it up to show the buyer but i do have a video to show the motor idling when everything was connected. The motor is curently setup for NA and if you want it to run all you need to do is connect all the plugs and ground and buy a ecu. Also it doesn't have any door panels but the rest of the interior is there.

All this car really needs is a turbo,ecu,injectors,piping,mid-pipe,tune and alot of labor to be ready.

CAR DOESN'T COME WITH RIMS YOU HAVE TO PROVIDE YOUR OWN SET

Modification List:
-Exterior
-Asuka Design Widebody Kit(Only car that has this kit)
-Asuka Design V-mount Hood
-Custom carbonfiber sideskirt lip
-Tein Springs
-Paint is Blaze Red(1 year old)
-Missing Headlight Covers

-Interior
-MOMO Bucket Seats(The driver side rail needs to be re-done)
-Carbonfiber Center Console Wrap
-Turbo Timer
-Apexi AVC Type-R
-Efini Steering Wheel
-Short Shifter
-Battery relocated to the Trunk
-Driver Seat has no Seat Belt

-Engine
-Rebuilt less than 1000 miles
-B&M Ignition Amplifier
-Emissions Removed with Banzai Block Off Plates
-CXracing Alum. Radiator
-25 Row Single Oil Cooler
-CXracing intercooler 5 in. Thick(still needs to be mounted and piping)
-ACT Clutch
-Single Turbo Harness
-Greddy Elbow
-Stainless Steel Oil Cooler Lines
-Stainless Steel Oil Feed line
-Stainless Steel Oil Drain line
-AST Removed

Thats all i could think of that are installed already.

Heres what it comes with HKS T4 manifold,Custom exhaust,ITS turbo(leaking oil),brand new nitto tires all tho the car doesn't come with rims so i don't know if you could use these tires but you get them anyways.

After 3 years the car still isn't under my name and i don't have a pink slip only a bill of sell from previous owner and old registration papers.

Also taking trades for well modified turbo cars that are currently registered and manual transmission plus cash depending on how much the car is worth.
-Rx7 87-95
-240sx 95+
-Anything Rotary,RB,SR Powered

$20,500
VIN-JM1FD331290204622

PM me or post for anymore info you need.

This what the engine looks like 1 week ago

This is what it looks like now

Video
MOV00084.flv video by fdinfinirx7 - Photobucket

sidewaysil80 · 10-26-2009, 05:05 AM

seems high for a wheel-less, non-running, needing so many misc parts project...good luck regardless. i think my only regret when it comes to cars is selling my fd

Chue240sx · 10-26-2009, 01:35 PM

OMG, if I wasn't 19 and still in school I would jump on this.

AdeJong 03 · 10-26-2009, 03:33 PM

you dont have a title and you want 20k for a car that isnt finished?

fdinfinirx7 · 10-26-2009, 05:28 PM

Quote:

Originally Posted by Chue240sx

OMG, if I wasn't 19 and still in school I would jump on this.

Good choice bc im 18 and im selling it.
Also price is flexible

maxed1 · 11-01-2009, 10:16 PM

wow just wow and no title

jdm538 · 11-01-2009, 11:35 PM

seen this car in person... crazy body work, chill guy.

s13dan · 11-02-2009, 01:37 AM

so pretty much your just selling the shell with a lot of parts....

fdinfinirx7 · 11-02-2009, 03:42 AM

I fixed everything to get the car running already i just need to connect my ECU which i don't have right now.

But when i do get it running i'll post a video of it.

What is the definition of a shell?
My car comes with full exterior,interior besides door panels,rebuilt engine less than 1k mile and i could make it run too.

Picture 3,4,5 were taken in september and alot of people saw me drove the car.

The only reason i would consider this a shell is because the rims don't come with it.
Also it comes with a folder full of receipts and past DMV papers

Also here are some interior pics...

Thanks JDM538

AdeJong 03 · 11-02-2009, 02:55 PM

so how would the title get handled on the car if you never had it? is it bill of sale only?

fdinfinirx7 · 11-02-2009, 05:11 PM

All i have is past registration papers and bill of sale

FTWjesse · 11-03-2009, 02:32 AM

holy shit, i some how knew that it was gonna be this car. sorry to see it go, thing was amazing last time i was down there.

not sure if you remember me. used to work for peter and david

fdinfinirx7 · 11-03-2009, 03:45 AM

^^^
I met a couple people who work for peter and david so i don't realy know.LOL

But about the car im starting to strip it and get it ready for a bolt in cage later on and try to register it so if it does get registered im keeping it.hahaha

BustedS13 · 11-03-2009, 03:50 AM

those dead plates that cover where the spoiler mounts are actually a pretty cool idea. i always like the look of those massive wings but it'd be nice to be able to take it off. very neat

anyway glws

fdinfinirx7 · 11-03-2009, 03:56 AM

Thanks
The reason i have it is bc when i removed my wing my paint was still new so it left the outline of the wing so i had to cover it some how.

Also i could put the wing on for the track and take it off for the streets so no one calls me a ricer.LoL

blackoutt · 11-04-2009, 12:45 PM

Beautiful car, makes me wish I kept my fd. But before you try to ask that price get a title! GLWS ... or keeping it haha.

carparthookup · 11-04-2009, 01:58 PM

I have a S13 hatch with SR20DET (runs good and registered), tasteful mods, straight trade, lmk if u are interested.

nathanong87 · 11-04-2009, 03:09 PM

first picture is all sorts of win. GLWS but it'll be hard to sell on these boards... why not part out the car?

fdinfinirx7 · 11-05-2009, 02:20 AM

Price drop!

15K

Or trade

I think this is a more reasonable price and im going to stick with it for now.

fdinfinirx7 · 11-06-2009, 01:53 AM

Quote:

Originally Posted by carparthookup

I have a S13 hatch with SR20DET (runs good and registered), tasteful mods, straight trade, lmk if u are interested.

Any pictures?

fdinfinirx7 · 11-06-2009, 01:54 AM

Quote:

Originally Posted by nathanong87

first picture is all sorts of win. GLWS but it'll be hard to sell on these boards... why not part out the car?

I just posted a part out thread on rx7club but im still interested in selling it or trading.
[Part Out] 1993 rx7 suspension,engine,and interior part out! - RX7Club.com

1180g35black · 11-06-2009, 05:02 AM

Did you get this car titled yet?

Maybe open to trade if so.

fdinfinirx7 · 11-06-2009, 05:45 AM

No title......

1180g35black · 11-06-2009, 11:46 AM

What is the deal with the title?

fdinfinirx7 · 11-06-2009, 01:17 PM

^ I don't have money, time or a car to deal with the DMV.
I also have a rx8 that got impounded and the fee is $1800 and its stuck in the impound for 1 month. This car is also forsale.LoL

1180g35black · 11-06-2009, 02:27 PM

If you can get it registered I may be up for a trade PM me for more info

fdinfinirx7 · 11-06-2009, 02:32 PM

Your in GA im in CA.
The main reason im selling it is bc i don't want to register it bc i know the fee is going to be high and i decided to make it a track car, forgot to mention theres no headlights.

1180g35black · 11-06-2009, 06:11 PM

I am from Oregon and have tons of friends in Cali that could check out the car for me. Something sounds a little off with not wanting to title the car but GLWS man

fdinfinirx7 · 11-08-2009, 04:43 AM

This is my last bump before i start to part out.
I really need money or trade+cash.

PM with a offer im really desperate so i'll probably take anything between 10k and 15k OBO

10-26-2009, 04:10 AM	#1
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	Fs/ft 1993 widebody rx7 project car Its time for me to let go of my 1993 mazda rx7 after 3 1/2 years. Located in long beach CA 90813 No Shipping The car is a clean title but hasn't been registered since june of 2006 which was when i purchased it. Theres alot of reason why im selling it 1) I lost my job so i can't aford to finish the project 2) I need a working car so i could go back to school 3) This isn't a car that 18 year old needs right now. My original plan for the car was to make it a track car. So i stripped everything under the interior meaning if you were to look under the interior there won't be any thing there but the chassis. Theres no AC or power steering and all the emmision related item were removed. The motor runs and i bought the block rebuilt and was told it has under 1000 miles. This is a project car so everything is disconnected so i can't start it up to show the buyer but i do have a video to show the motor idling when everything was connected. The motor is curently setup for NA and if you want it to run all you need to do is connect all the plugs and ground and buy a ecu. Also it doesn't have any door panels but the rest of the interior is there. All this car really needs is a turbo,ecu,injectors,piping,mid-pipe,tune and alot of labor to be ready. CAR DOESN'T COME WITH RIMS YOU HAVE TO PROVIDE YOUR OWN SET Modification List: -Exterior -Asuka Design Widebody Kit(Only car that has this kit) -Asuka Design V-mount Hood -Custom carbonfiber sideskirt lip -Tein Springs -Paint is Blaze Red(1 year old) -Missing Headlight Covers -Interior -MOMO Bucket Seats(The driver side rail needs to be re-done) -Carbonfiber Center Console Wrap -Turbo Timer -Apexi AVC Type-R -Efini Steering Wheel -Short Shifter -Battery relocated to the Trunk -Driver Seat has no Seat Belt -Engine -Rebuilt less than 1000 miles -B&M Ignition Amplifier -Emissions Removed with Banzai Block Off Plates -CXracing Alum. Radiator -25 Row Single Oil Cooler -CXracing intercooler 5 in. Thick(still needs to be mounted and piping) -ACT Clutch -Single Turbo Harness -Greddy Elbow -Stainless Steel Oil Cooler Lines -Stainless Steel Oil Feed line -Stainless Steel Oil Drain line -AST Removed Thats all i could think of that are installed already. Heres what it comes with HKS T4 manifold,Custom exhaust,ITS turbo(leaking oil),brand new nitto tires all tho the car doesn't come with rims so i don't know if you could use these tires but you get them anyways. After 3 years the car still isn't under my name and i don't have a pink slip only a bill of sell from previous owner and old registration papers. Also taking trades for well modified turbo cars that are currently registered and manual transmission plus cash depending on how much the car is worth. -Rx7 87-95 -240sx 95+ -Anything Rotary,RB,SR Powered $20,500 VIN-JM1FD331290204622 PM me or post for anymore info you need. This what the engine looks like 1 week ago This is what it looks like now Video MOV00084.flv video by fdinfinirx7 - Photobucket

11-02-2009, 01:37 AM	#8
s13dan Zilvia FREAK! Join Date: Aug 2003 Location: Springfield, Mo Posts: 1,159 Trader Rating: (2)	so pretty much your just selling the shell with a lot of parts.... __________________ 89 FB #933-hot rod///91 coupe #130,603-dd

11-04-2009, 01:58 PM	#17
carparthookup 626DRIFT / SONiCMOTOR Join Date: Aug 2005 Location: Baldwin Park 626!! * AIM: Carparthookup * 626drift.com / SonicMotor.com Age: 25 Posts: 4,312 Trader Rating: (53)	I have a S13 hatch with SR20DET (runs good and registered), tasteful mods, straight trade, lmk if u are interested. __________________ XXR wheels on special! Buddy club special Performance lighting special: 7x6 $29 HID Kits $58!! Want a bucket seat? On a budget? Click here GROUP BUY! BOSS KIT steering wheel Hubs and Quick releases starting at $19.95!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/cars-sale/286403-fs-ft-1993-widebody-rx7-project-car.html
Posted By	For	Type	Date	Hits
MySpace.com - External Link Alert	This thread	Refback	10-29-2009 12:34 AM	1

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

10-26-2009, 05:05 AM	#2
sidewaysil80 Zilvia Junkie Join Date: Jun 2008 Location: virginia beach Posts: 306 Trader Rating: (1)	seems high for a wheel-less, non-running, needing so many misc parts project...good luck regardless. i think my only regret when it comes to cars is selling my fd

10-26-2009, 01:35 PM	#3
Chue240sx Zilvia Junkie Join Date: Sep 2007 Location: California Age: 19 Posts: 300 Trader Rating: (3)	OMG, if I wasn't 19 and still in school I would jump on this.

10-26-2009, 03:33 PM	#4
AdeJong 03 Leaky Injector Join Date: Nov 2008 Location: LA, CA Age: 23 Posts: 100 Trader Rating: (0)	you dont have a title and you want 20k for a car that isnt finished?

11-01-2009, 10:16 PM	#6
maxed1 Join Date: Sep 2008 Location: g ville Age: 41 Posts: 18 Trader Rating: (0)	wow just wow and no title

11-01-2009, 11:35 PM	#7
jdm538 Post Whore! Join Date: Apr 2003 Location: LA/OC SOCAL Posts: 2,784 Trader Rating: (16)	seen this car in person... crazy body work, chill guy.

11-02-2009, 03:42 AM	#9
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	I fixed everything to get the car running already i just need to connect my ECU which i don't have right now. But when i do get it running i'll post a video of it. What is the definition of a shell? My car comes with full exterior,interior besides door panels,rebuilt engine less than 1k mile and i could make it run too. Picture 3,4,5 were taken in september and alot of people saw me drove the car. The only reason i would consider this a shell is because the rims don't come with it. Also it comes with a folder full of receipts and past DMV papers Also here are some interior pics... Thanks JDM538

11-02-2009, 02:55 PM	#10
AdeJong 03 Leaky Injector Join Date: Nov 2008 Location: LA, CA Age: 23 Posts: 100 Trader Rating: (0)	so how would the title get handled on the car if you never had it? is it bill of sale only?

11-02-2009, 05:11 PM	#11
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	All i have is past registration papers and bill of sale

11-03-2009, 02:32 AM	#12
FTWjesse Leaky Injector Join Date: Oct 2008 Location: Covina Posts: 52 Trader Rating: (0)	holy shit, i some how knew that it was gonna be this car. sorry to see it go, thing was amazing last time i was down there. not sure if you remember me. used to work for peter and david

11-03-2009, 03:45 AM	#13
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	^^^ I met a couple people who work for peter and david so i don't realy know.LOL But about the car im starting to strip it and get it ready for a bolt in cage later on and try to register it so if it does get registered im keeping it.hahaha

11-03-2009, 03:50 AM	#14
BustedS13 In time-out for misbehaving. Join Date: Jan 2004 Location: STL Age: 25 Posts: 7,862 Trader Rating: (0)	those dead plates that cover where the spoiler mounts are actually a pretty cool idea. i always like the look of those massive wings but it'd be nice to be able to take it off. very neat anyway glws

11-03-2009, 03:56 AM	#15
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	Thanks The reason i have it is bc when i removed my wing my paint was still new so it left the outline of the wing so i had to cover it some how. Also i could put the wing on for the track and take it off for the streets so no one calls me a ricer.LoL

11-04-2009, 12:45 PM	#16
blackoutt Leaky Injector Join Date: Sep 2009 Location: upstate NY Posts: 76 Trader Rating: (2)	Beautiful car, makes me wish I kept my fd. But before you try to ask that price get a title! GLWS ... or keeping it haha.

11-04-2009, 03:09 PM	#18
nathanong87 Zilvia Junkie Join Date: Jul 2006 Location: maryland Age: 22 Posts: 310 Trader Rating: (0)	first picture is all sorts of win. GLWS but it'll be hard to sell on these boards... why not part out the car?

11-05-2009, 02:20 AM	#19
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	Price drop! 15K Or trade I think this is a more reasonable price and im going to stick with it for now.

11-06-2009, 05:02 AM	#22
1180g35black Join Date: Oct 2009 Location: GA Posts: 34 Trader Rating: (0)	Did you get this car titled yet? Maybe open to trade if so.

11-06-2009, 05:45 AM	#23
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	No title......

11-06-2009, 11:46 AM	#24
1180g35black Join Date: Oct 2009 Location: GA Posts: 34 Trader Rating: (0)	What is the deal with the title?

11-06-2009, 01:17 PM	#25
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	^ I don't have money, time or a car to deal with the DMV. I also have a rx8 that got impounded and the fee is $1800 and its stuck in the impound for 1 month. This car is also forsale.LoL

11-06-2009, 02:27 PM	#26
1180g35black Join Date: Oct 2009 Location: GA Posts: 34 Trader Rating: (0)	If you can get it registered I may be up for a trade PM me for more info

11-06-2009, 02:32 PM	#27
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	Your in GA im in CA. The main reason im selling it is bc i don't want to register it bc i know the fee is going to be high and i decided to make it a track car, forgot to mention theres no headlights.

11-06-2009, 06:11 PM	#28
1180g35black Join Date: Oct 2009 Location: GA Posts: 34 Trader Rating: (0)	I am from Oregon and have tons of friends in Cali that could check out the car for me. Something sounds a little off with not wanting to title the car but GLWS man

11-08-2009, 04:43 AM	#29
fdinfinirx7 Leaky Injector Join Date: Mar 2007 Location: long beach Posts: 97 Trader Rating: (3)	This is my last bump before i start to part out. I really need money or trade+cash. PM with a offer im really desperate so i'll probably take anything between 10k and 15k OBO