CA TW: 89 S13 Hatch (track starter) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xllivillx · 01-26-2009, 06:00 PM

So i decided to go a different route with my s13 hatch. I wanted to make it a show car instead of a track car. The day i decided to go this route i hit a guard rail on the freeway in the rain. The frame is still straight, theres no damage to the engine bay, i replaced the fender, the only thing that needs pushed out is the 1/4 pannel (check the pictures). Theres 2 thing that can be done to fix it, pull / hammer it out and slap some bondo on it and call it a day... OR... just pop rivet an over fender on it and call it a day.

Heres some info on my car.

Basic:
1989 Nissan 240sx
2.4L KA24E Engine
Factory 5spd (not converted)

Engine:
Rebuilt KA24E (about 30k miles on it by previous owner)
Injen Short Ram Intake

Suspension:
32 way Adjustable Megan Street Coilovers
Tien Inner Tie Rods
Kazama Outter Tie Rods
Megan Front Strut Tower Bar
Tanabe Rear Strut Tower Bar

Driveline:
6 bolt axle J30 VLSD (direct fit on stock axles)
Exedy Stg 1 Clutch (about 80k miles on it, replaced before engine was rebuilt by prevous owner)

Interior:
S14 Driver Seat
Kazama Shift Knob
NRG Steering Wheel
Momo Horn Button

Exhaust:
Jasma Resonated 3" Catback (super quiet and super nice)

Stero:
Sony XPlode Head Unit
Sony XPlode Front and Rear 4x7 Speakers

Like i said this was going to be a track car so i started to put on some track mods but i dont have the time or money to fix the 1/4 pannel. This would be a great chassis to start with since it alrady has some of the mods needed for the track and the frame is still straight. Heres some pictures of the car.

Im looking to trade for a stock S14 Zenki or another stock 91-94 S13 HB (i would perfer a s14 tho). Even trade, no cash cuz i dont have any and since mine alrady has mods and im looking for one thats as stock as possible.

LMK what u got and we can get this trade rollin. I didnt report the hit so its still clean title, regestration is paied untill January 2010, and i got pinkslip in hand (i would perfer the same).

Located in Cypress OC.

PM for best response.

wow-thats-a-cool-car · 01-27-2009, 01:33 PM

ahahaha u want to do a straight trade for an s14?
with that car lol
u will be luck if you trade it for another s13
GLWS

BRAIN_Z33 · 01-27-2009, 01:40 PM

UMMMMMMM..........

xllivillx · 02-03-2009, 08:36 AM

bump #1... the frame is still s traight, its a great start for a track car... the engine is rebuilt so itll lass while ur saving money for a sr

im also open to trades for a honda or integra with a b series motor

*Dousan_PG* · 02-03-2009, 11:03 AM

wide fenders wont cover that up
straight trade? sohc 240 in that condition is worth about 500 bucks. max.

¹²³Klan™ · 02-03-2009, 11:06 AM

Quote:

Originally Posted by Dousan_PG

wide fenders wont cover that up
straight trade? sohc 240 in that condition is worth about 500 bucks. max.

quoted for the truth.

but he has coils/other upgrades so at max this car is worth around 1k range.

xllivillx · 02-03-2009, 11:23 AM

over fenders will cover 90% of it, the only thing it wont cover would be the body line by the tail light which can be pulled out. i just dont have the time or money to do it

CIutchCollidE · 02-03-2009, 11:58 AM

Quote:

Originally Posted by xllivillx

Ouch wtf happened to that car? Was it some Ninja Choppin' shit?

*Dousan_PG* · 02-03-2009, 12:36 PM

looks like a guard rail doing dorifttttoo

been there done that
haha.
toss the chassis!

xllivillx · 02-03-2009, 12:39 PM

rain + free way turn = guard rail =(

xllivillx · 02-09-2009, 08:35 AM

final bump, taking trades for civics with b series engine

PRADOgy · 02-09-2009, 01:26 PM

700.00 and ill pick that project up..

lmk

01-27-2009, 01:33 PM	#2
wow-thats-a-cool-car Post Whore! Join Date: Mar 2008 Location: Torrance (Socal/down at the beach) Posts: 2,504 Trader Rating: (3)	ahahaha u want to do a straight trade for an s14? with that car lol u will be luck if you trade it for another s13 GLWS __________________ I Weld Diff's PM me

01-27-2009, 01:40 PM	#3
BRAIN_Z33 Zilvia Addict Join Date: Feb 2007 Location: SOUTH SIDE CALI I.E. Posts: 829 Trader Rating: (3) Rides Gallery: BRAIN_Z33	UMMMMMMM.......... __________________ shit dont stop till my casket drops

02-03-2009, 11:03 AM	#5
Dousan_PG Pink GodziRa Join Date: May 2002 Location: Orange County, California Age: 31 Posts: 16,414 Trader Rating: (14) Rides Gallery: Dousan_PG	wide fenders wont cover that up straight trade? sohc 240 in that condition is worth about 500 bucks. max. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

02-03-2009, 12:36 PM	#9
Dousan_PG Pink GodziRa Join Date: May 2002 Location: Orange County, California Age: 31 Posts: 16,414 Trader Rating: (14) Rides Gallery: Dousan_PG	looks like a guard rail doing dorifttttoo been there done that haha. toss the chassis! __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

02-09-2009, 01:26 PM	#12
PRADOgy Zilvia FREAK! Join Date: Apr 2007 Location: Felony Flats Age: 24 Posts: 1,027 Trader Rating: (0) Rides Gallery: PRADOgy	700.00 and ill pick that project up.. lmk __________________ Myspace.com/DAYVkaos (Minimal Techno)

01-26-2009, 06:00 PM	#1
xllivillx Zilvia Junkie Join Date: Aug 2008 Location: So Cal (714/562) Age: 21 Posts: 590 Trader Rating: (1)	TW: 89 S13 Hatch w/ ModsclIck (track starter) So i decided to go a different route with my s13 hatch. I wanted to make it a show car instead of a track car. The day i decided to go this route i hit a guard rail on the freeway in the rain. The frame is still straight, theres no damage to the engine bay, i replaced the fender, the only thing that needs pushed out is the 1/4 pannel (check the pictures). Theres 2 thing that can be done to fix it, pull / hammer it out and slap some bondo on it and call it a day... OR... just pop rivet an over fender on it and call it a day. Heres some info on my car. Basic: 1989 Nissan 240sx 2.4L KA24E Engine Factory 5spd (not converted) Engine: Rebuilt KA24E (about 30k miles on it by previous owner) Injen Short Ram Intake Suspension: 32 way Adjustable Megan Street Coilovers Tien Inner Tie Rods Kazama Outter Tie Rods Megan Front Strut Tower Bar Tanabe Rear Strut Tower Bar Driveline: 6 bolt axle J30 VLSD (direct fit on stock axles) Exedy Stg 1 Clutch (about 80k miles on it, replaced before engine was rebuilt by prevous owner) Interior: S14 Driver Seat Kazama Shift Knob NRG Steering Wheel Momo Horn Button Exhaust: Jasma Resonated 3" Catback (super quiet and super nice) Stero: Sony XPlode Head Unit Sony XPlode Front and Rear 4x7 Speakers Like i said this was going to be a track car so i started to put on some track mods but i dont have the time or money to fix the 1/4 pannel. This would be a great chassis to start with since it alrady has some of the mods needed for the track and the frame is still straight. Heres some pictures of the car. Im looking to trade for a stock S14 Zenki or another stock 91-94 S13 HB (i would perfer a s14 tho). Even trade, no cash cuz i dont have any and since mine alrady has mods and im looking for one thats as stock as possible. LMK what u got and we can get this trade rollin. I didnt report the hit so its still clean title, regestration is paied untill January 2010, and i got pinkslip in hand (i would perfer the same). Located in Cypress OC. PM for best response.

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

02-03-2009, 08:36 AM	#4
xllivillx Zilvia Junkie Join Date: Aug 2008 Location: So Cal (714/562) Age: 21 Posts: 590 Trader Rating: (1)	bump #1... the frame is still s traight, its a great start for a track car... the engine is rebuilt so itll lass while ur saving money for a sr im also open to trades for a honda or integra with a b series motor

02-03-2009, 11:23 AM	#7
xllivillx Zilvia Junkie Join Date: Aug 2008 Location: So Cal (714/562) Age: 21 Posts: 590 Trader Rating: (1)	over fenders will cover 90% of it, the only thing it wont cover would be the body line by the tail light which can be pulled out. i just dont have the time or money to do it

02-03-2009, 12:39 PM	#10
xllivillx Zilvia Junkie Join Date: Aug 2008 Location: So Cal (714/562) Age: 21 Posts: 590 Trader Rating: (1)	rain + free way turn = guard rail =(

02-09-2009, 08:35 AM	#11
xllivillx Zilvia Junkie Join Date: Aug 2008 Location: So Cal (714/562) Age: 21 Posts: 590 Trader Rating: (1)	final bump, taking trades for civics with b series engine

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode