How To: recirc a Blitz BOV (w/pics) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

uiuc240 · 04-28-2003, 10:14 PM

OK, for those of you who have a Blitz BOV with the SMIC piping and are tired of driveability issues, I have the fix. Here are the parts you need:

Blitz steel IC pipe flange (phase2...$20 + shipping)
2 longer screws (M5 x 12mm)
2 flat washers (M5)
2 lock washers (M5)
one rubber hose (model 617 from Autozone, if that helps)
2 gear clamps

Start off by taking the horn off and replacing it with the flange...it fits perfectly. By the way, if you need to reposition your BOV, do it so it looks just like this. Here is the first pic:

uiuc240 · 04-28-2003, 10:15 PM

This next pic shows the two places you are connecting...from the outlet of the BOV to the stock recirculating inlet on the intake pipe. Obviously, this trick needs the stock piping.

uiuc240 · 04-28-2003, 10:17 PM

This is a dumb pic, but it shows the shape of the hose and the part number from Autozone. This one fit perfectly after I trimmed 1/2" off the bottom end.

uiuc240 · 04-28-2003, 10:20 PM

this is the final product. if yours looks like this, you should be good. now, loosen up the screw on the top of the BOV and drive! it won't chatter now, and it's pretty quiet...but it works. i was tired of the ghetto way i had it before (ch-ch-ch-ch-ch-ch-chuuuuuh)

planb · 04-28-2003, 10:43 PM

Just a suggestion, maybe put some JB weld on tip of the steel flange/adapter, file it down to make a lip for the hose. so it wont pop off.

uiuc240 · 04-28-2003, 10:45 PM

Quote:

Originally posted by planb
Just a suggestion, maybe put some JB weld on tip of the steel flange/adapter, file it down to make a lip for the hose. so it wont pop off.

It's not under pressure, really. It's connect to the intake. I mean, the force of the air rushing out could budge it if I was making like 25 psi, but I'm not. But thanks for the suggestion...it'll make that mod if it ever pops off.

Eric

planb · 04-28-2003, 10:48 PM

thats true. but making things with jb weld is fuuuun!

kazuo · 09-11-2003, 08:38 PM

very useful for people who dont want to deal with that leaky-idle-ooh-im-gonna-stall-on-you ****.

BTW, I was looking for the hose using the part bumber you gave (617) but no luck -- do you have the measurements of the hose? I will just go to Kragen and try to get a similar one... Autozone is too far from my house anyways.

word.

SilviaDriver · 09-11-2003, 09:14 PM

yea i hear the Blitz bov leaks but would it leak under 7psi?

JDMark · 09-11-2003, 09:15 PM

nice write up uiuc, thanks! one quick question tho. just wodering how much quieter does it make it?

*crioten* · 09-11-2003, 11:37 PM

we need more things like this in the faq section

04-28-2003, 10:43 PM	#5
planb Leaky Injector Join Date: Aug 2002 Location: raleigh nc Posts: 132 Trader Rating: (0)	Just a suggestion, maybe put some JB weld on tip of the steel flange/adapter, file it down to make a lip for the hose. so it wont pop off. __________________ http://www.planb-attack.com/jon/personalsig.jpg

04-28-2003, 10:48 PM	#7
planb Leaky Injector Join Date: Aug 2002 Location: raleigh nc Posts: 132 Trader Rating: (0)	thats true. but making things with jb weld is fuuuun! __________________ http://www.planb-attack.com/jon/personalsig.jpg

09-11-2003, 08:38 PM	#8
kazuo Post Whore! Join Date: Aug 2002 Location: Posts: 2,755 Trader Rating: (3)	this one needs to be archived! very useful for people who dont want to deal with that leaky-idle-ooh-im-gonna-stall-on-you ****. BTW, I was looking for the hose using the part bumber you gave (617) but no luck -- do you have the measurements of the hose? I will just go to Kragen and try to get a similar one... Autozone is too far from my house anyways. word.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

09-11-2003, 09:14 PM	#9
SilviaDriver Post Whore! Join Date: Jun 2002 Location: San Jose, CA Age: 25 Posts: 5,518 Trader Rating: (2) Rides Gallery: SilviaDriver	yea i hear the Blitz bov leaks but would it leak under 7psi?

09-11-2003, 09:15 PM	#10
JDMark Zilvia Junkie Join Date: Dec 2002 Location: redmond, wa Posts: 401 Trader Rating: (2)	nice write up uiuc, thanks! one quick question tho. just wodering how much quieter does it make it?