| 350-400 WHEEL HP on a stock CA? certainly not. i've seen 300hp CA's with bent rods, so if you wanna run 400 hp on stock internals, go on.
8000 rpm are possible, but for everything over 8000 rpm you'll need solid lifters. especially with more aggressive cams. as a safety measure i would at least get some uprated valve springs when you're running different cams and set the rev limit to 8000.
and for a water/air IC you'll need a little more than just the core. pump, pipe, tank, radiator. i'm pretty sure thats gonna weigh a little more than a medium sized v-mount IC.
sure, 444s are pretty maxed out when running 300 hp. a buddy of mine runs 740's and his engine puts out about 350 HP. |