alzahakar

I have a 95 240SX SE and I've ran into a small problem that I can't figure out with the FSM. Basically, I can control my driver side window from the driver side and the pass side window from the pass side, but I can't control the pass side window from the driver side. When I press the pass window switch on the driver side, I get nothing. No noise, no clicks, nothing. Simple answer is it's probably a bad switch. The reason I'm having trouble figuring this out is the fact that it's a jury rigged wiring job from the previous owner. I have two seperate wiring harnesses coming into the door, but they are not plugged into anything. Instead, the previous owner cut the factory harness that plugs into the window controls/lock switch about 12" back and spliced that into the two harnesses coming into the door from the dash. I will get pics of this up later today. What my first major question is on this whole deal is, what are those two harnesses in the door supposed to plug into? Neither is the same plug as the window controls. Once I get some help on that, the window problem might get alot easier.

Sorry if it sounds like an incoherent post, but it's 1AM and I've had my nose in the FSM for most of the day with no results. Please, if someone can shoot a quick pic of what the in-door wiring looks like on the driver side, I would be much appreciative.